Dr Peifeng Li

  • Senior Lecturer (Systems Power and Energy)

telephone: +44 141 330 2703
email: Peifeng.Li@glasgow.ac.uk

Research interests

Publications

List by: Type | Date

Jump to: 2017 | 2016 | 2015 | 2014 | 2011
Number of items: 19.

2017

Wang, Z. and Li, P. (2017) Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceramics International, 43(9), pp. 6967-6975. (doi:10.1016/j.ceramint.2017.02.121)

Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)

2016

Liu, Z., Li, P., Srikanth, N., Liu, T. and Chai, G. B. (2016) Quantification of flexural fatigue life and 3D damage in carbon fibre reinforced polymer laminates. Composites Part A: Applied Science and Manufacturing, 90, pp. 778-785. (doi:10.1016/j.compositesa.2016.09.008)

Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555. (doi:10.1002/adem.201600215)

Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)

Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)

Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)

Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)

2015

Wang, Z. and Li, P. (2015) Dynamic failure and fracture mechanism in alumina ceramics: Experimental observations and finite element modelling. Ceramics International, 41(10 PtA), pp. 12763-12772. (doi:10.1016/j.ceramint.2015.06.110)

Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)

Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)

Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120. (doi:10.1016/j.msea.2014.11.028)

Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)

2014

Li, P., Wang, Z., Petrinic, N. and Siviour, C.R. (2014) Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 614, pp. 116-121. (doi:10.1016/j.msea.2014.07.015)

Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)

Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)

Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061. (doi:10.1016/j.ceramint.2013.09.141)

Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)

2011

Li, P., Petrinic, N. and Siviour, C.R. (2011) Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography. Journal of Applied Physics, 110(8), 083516. (doi:10.1063/1.3647769)

This list was generated on Wed Nov 22 00:44:22 2017 GMT.
Jump to: Articles
Number of items: 19.

Articles

Wang, Z. and Li, P. (2017) Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceramics International, 43(9), pp. 6967-6975. (doi:10.1016/j.ceramint.2017.02.121)

Ho, N. S. K., Li, P., Raghavan, S. and Li, T. (2017) The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 687, pp. 123-130. (doi:10.1016/j.msea.2017.01.038)

Liu, Z., Li, P., Srikanth, N., Liu, T. and Chai, G. B. (2016) Quantification of flexural fatigue life and 3D damage in carbon fibre reinforced polymer laminates. Composites Part A: Applied Science and Manufacturing, 90, pp. 778-785. (doi:10.1016/j.compositesa.2016.09.008)

Huang, R., Li, P., Wang, Z. and Liu, T. (2016) X-ray microtomographic characterization and quantification of the strain rate dependent failure mechanism in cenosphere epoxy syntactic foams. Advanced Engineering Materials, 18(9), pp. 1550-1555. (doi:10.1002/adem.201600215)

Li, P. and Wang, Z. (2016) Experimental characterization and modified constitutive modeling of the strain rate dependent compressive behavior of adhesives. Macromolecular Materials and Engineering, 301(5), pp. 577-585. (doi:10.1002/mame.201500415)

Huang, R., Li, P. and Liu, T. (2016) X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams. Composite Structures, 140, pp. 157-165. (doi:10.1016/j.compstruct.2015.12.040)

Li, P., Nguyen, N. V. and Hao, H. (2016) Dynamic compressive behaviour of Mg foams manufactured by the direct foaming process. Materials and Design, 89, pp. 636-641. (doi:10.1016/j.matdes.2015.10.021)

Do, D. K. and Li, P. (2016) The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting. Virtual and Physical Prototyping, 11(1), pp. 41-47. (doi:10.1080/17452759.2016.1142215)

Wang, Z. and Li, P. (2015) Dynamic failure and fracture mechanism in alumina ceramics: Experimental observations and finite element modelling. Ceramics International, 41(10 PtA), pp. 12763-12772. (doi:10.1016/j.ceramint.2015.06.110)

Wang, Z. and Li, P. (2015) Characterisation of dynamic behaviour of alumina ceramics: evaluation of stress uniformity. AIP Advances, 5(10), 107224. (doi:10.1063/1.4934793)

Huang, R. and Li, P. (2015) Elastic behaviour and failure mechanism in epoxy syntactic foams: the effect of glass microballoon volume fractions. Composites Part B: Engineering, 78, pp. 401-408. (doi:10.1016/j.compositesb.2015.04.002)

Li, P. (2015) Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 622, pp. 114-120. (doi:10.1016/j.msea.2014.11.028)

Liu, T., Huang, R. and Li, P. (2015) Cone-beam CT reconstruction along any orientation of interest. Journal of X-Ray Science and Technology, 23(6), pp. 773-782. (doi:10.3233/XST-150527) (PMID:26756412)

Li, P., Wang, Z., Petrinic, N. and Siviour, C.R. (2014) Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 614, pp. 116-121. (doi:10.1016/j.msea.2014.07.015)

Huang, Y., Wei, C., Chen, L. and Li, P. (2014) Quantitative correlation between geometric parameters and stress concentration of corrosion pits. Engineering Failure Analysis, 44, pp. 168-178. (doi:10.1016/j.engfailanal.2014.05.020)

Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., Reece, M. J., Sakka, Y. and Vasylkiv, O. (2014) Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), pp. 271-275. (doi:10.2109/jcersj2.122.271)

Badica, P., Borodianska, H., Xie, S., Zhao, T., Demirskyi, D., Li, P., Tok, A. I.Y., Sakka, Y. and Vasylkiv, O. (2014) Toughness control of boron carbide obtained by spark plasma sintering in nitrogen atmosphere. Ceramics International, 40(2), pp. 3053-3061. (doi:10.1016/j.ceramint.2013.09.141)

Song, X., Fong, K.S., Oon, S.R., Tiong, W.R., Li, P.F., Korsunsky, A. M. and Danno, A. (2014) Diametrical growth in the forward flow forming process: simulation, validation, and prediction. International Journal of Advanced Manufacturing Technology, 71(1-4), pp. 207-217. (doi:10.1007/s00170-013-5492-x)

Li, P., Petrinic, N. and Siviour, C.R. (2011) Quantification of impact energy dissipation capacity in metallic thin-walled hollow sphere foams using high speed photography. Journal of Applied Physics, 110(8), 083516. (doi:10.1063/1.3647769)

This list was generated on Wed Nov 22 00:44:22 2017 GMT.