Smart Infrastructure

Breen, J., Mallik, W., Adhikari, S. (2025) Performance analysis and geometric optimization of bladeless wind turbines using wake oscillator model. Renewable Energy, 254, (doi: 10.1016/j.renene.2025.123549)

Jacques, A., Adhikari, S. (2025) Mode veering via inertial coupling. Journal of Sound and Vibration, 617, (doi: 10.1016/j.jsv.2025.119292)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Advanced energy harvesting vibration absorbers using inertial amplifiers. Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 11, (doi: 10.1061/ajrua6.rueng-1529)

Adhikari, S., Chowdhury, S. (2025) Geometric amplification of damping: novel mechanisms for enhanced vibration control. Structures, 79, (doi: 10.1016/j.istruc.2025.109364)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Enhancing low-frequency vibration energy harvesting using negative stiffness inertial amplifiers. Renewable Energy, 247, (doi: 10.1016/j.renene.2025.123036)

Chowdhury, S., Adhikari, S., Banerjee, A. (2025) Robust control design of nonlinear negative stiffness base isolators for MDOF systems. International Journal of Non-Linear Mechanics, 174, (doi: 10.1016/j.ijnonlinmec.2025.105083)

Adhikari, S., Chowdhury, S. (2025) Advanced vibration mitigation with novel stiffened inertial amplifier designs. Journal of Earthquake Engineering,

Kim, T., Yi, S.-r., Kim, J. H., Byun, J.-E. (2025) Disaster resilience analysis framework for lifeline networks: integrating reliability, redundancy, and recoverability. International Journal of Disaster Risk Reduction, 123, (doi: 10.1016/j.ijdrr.2025.105436)

Chowdhury, S., Adhikari, S. (2025) Nonlinear damping amplifier friction bearings. Journal of Vibration and Acoustics, 147, (doi: 10.1115/1.4067800)

Chowdhury, S., Adhikari, S. (2025) Stiffened amplifier energy harvesting vibration absorbers. Smart Materials and Structures, 34, (doi: 10.1088/1361-665X/ade20f)

Zheng, T., Buckley, R., Febrianto, E. (2025) Automatic interpretation of downhole seismic geophysical data accounting for uncertainty and measurement error. Journal of Geotechnical and Geoenvironmental Engineering, 151, (doi: 10.1061/JGGEFK.GTENG-13491)

Korec, E., Grassl, P., Jirásek, M., Wong, H. S., Martínez-Pañeda, E. (2025) RAAC panels can suddenly collapse before any warning of corrosion-induced surface cracking. npj Materials Degradation, 9, (doi: 10.1038/s41529-025-00596-5)

Chowdhury, S., Adhikari, S. (2025) Structural vibration control using nonlinear damping amplifier friction vibration absorbers. Applied Mathematics and Mechanics, 46, pp. 965-988. (doi: 10.1007/s10483-025-3248-7)

Wang, M., Jiang, K., Shi, Y., Grassl, P., Liang, Y., Zhao, O. (2025) Experimental investigation and analysis of full-scale steel–recyclable aggregate concrete composite beams with bolted shear connectors. Engineering Structures, 328, (doi: 10.1016/j.engstruct.2025.119737)

Chowdhury, S., Adhikari, S. (2025) Nonlinear inertial amplifier liquid column dampers. Applied Mathematical Modelling, 140, (doi: 10.1016/j.apm.2024.115875)

Chowdhury, S., Adhikari, S. (2025) Nonlinear stiffened inertial amplifier tuned mass friction dampers. Soil Dynamics and Earthquake Engineering, 191, (doi: 10.1016/j.soildyn.2025.109264)

Daramola, A. M., Satyanaga, A., Alfrendo, B. D., Kim, Y., Qian, Z., Kim, J. (2025) Real-time scanning curve of soil-water characteristic curve for residual soil slope. Sustainability, 17, (doi: 10.3390/su17051803)

Daramola, A. M., Satyanaga, A., Adejumo, B. D., Kim, Y., Qian, Z., Kim, J. (2025) Real-time scanning curve of soil–water characteristic curve for sustainability of residual soil slopes. Sustainability, 17, (doi: 10.3390/su17051803)

Kim, Y., Sim, T. E., Chua, Y. S., Bakytuly, N., Satyanaga, A., Pu, J. (2025) Green cover systems for slope stabilisation in Singapore. Land,

Aldellaa, I., Grassl, P. (2025) Effect of Water-cement Ratio and Current Density on Accelerated Corrosion Induced Cracking.

Taghavinejad, A., Rabbani, A., Falcone, G., Shang, J., Arif, M., Zhang, Y. (2025) Pore network modelling of CO2-shale interaction for carbon storage: Swelling effect and fracture permeability. International Journal of Greenhouse Gas Control, 141, (doi: 10.1016/j.ijggc.2024.104294)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) From impact to control: inertially amplified friction bearings. ASCE - ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10, (doi: 10.1061/ajrua6.rueng-1407)

Chua, Y. S., Kim, Y., Li, M., Aventian, G. D., Satyanaga, A. (2024) A survey of advanced materials and technologies for energy harvesting from roadways. Electronics, 13, (doi: 10.3390/electronics13244946)

Wiragunarsa, I.M., Zuhal, L.R., Dirgantara, T., Putra, I.S., Febrianto, E. (2024) Total Lagrangian smoothed particle hydrodynamics with an improved bond-based deformation gradient for large strain solid dynamics. Journal of Computational Physics, 518, (doi: 10.1016/j.jcp.2024.113309)

Adhikari, S., Chowdhury, S. (2024) Enhanced Q-factor in microcantilevers using stiffened inertial amplifiers. Journal of Applied Physics, 136, (doi: 10.1063/5.0237524)

Peevers, G., McMaster, T., Bhardwaj, N., Shah, J. A., Keoh, S. L., Goh, C. S., Kim, Y. (2024) Supporting a Mindset Shift to Blended Learning at the University of Glasgow Singapore.

Orazayeva, S., Satyanaga, A., Kim, Y., Rahardjo, H., Qian, Z., Moon, S.-W., Kim, J. (2024) Advanced scanning technology for volume change measurement of residual soil. Applied Sciences, 14, (doi: 10.3390/app142310938)

Roy, A., Chatterjee, T., Adhikari, S. (2024) A physics-informed neural network enhanced importance sampling (PINN-IS) for data-free reliability analysis. Probabilistic Engineering Mechanics, 78, (doi: 10.1016/j.probengmech.2024.103701)

Roy, A., Chakraborty, S., Adhikari, S. (2024) Seismic reliability analysis of nonlinear structures by active learning-based adaptive sparse Bayesian regressions. International Journal of Non-Linear Mechanics, 165, (doi: 10.1016/j.ijnonlinmec.2024.104817)

Alfarisy, D., Zuhal, L., Ortiz, M., Cirak, F., Febrianto, E. (2024) Point collocation with mollified piecewise polynomial approximants for high-order partial differential equations. International Journal for Numerical Methods in Engineering, 125, (doi: 10.1002/nme.7548)

Zhou, C., Marlot, A., Grassl, P. (2024) CDPM2F: a damage-plasticity approach for modelling the failure of strain hardening cementitious composites. Engineering Fracture Mechanics, 308, (doi: 10.1016/j.engfracmech.2024.110325)

Peevers, G., McMaster, T., Bhardwaj, N., Shah, J. A., Keoh, S. L., Goh, C. S., Kim, Y. (2024) A Collaborative Journey: Redesigning University of Glasgow Singapore’s Programmes for Blended Delivery.

Kim, Y., Das, S., Shah, J. A., Lim, L. H. I. (2024) Design of Project-Based Learning (PBL) in civil engineering. International Journal of Learning and Teaching, 10, pp. 539-543. (doi: 10.18178/ijlt.10.4.539-543)

Febrianto, E., Šístek, J., Kůs, P., Kecman, M., Cirak, F. (2024) A three-grid high-order immersed finite element method for the analysis of CAD models. Computer-Aided Design, 173, (doi: 10.1016/j.cad.2024.103730)

Zheng, T., Buckley, R., Febrianto, E. (2024) Development of a Framework for Automatic Quantification of Uncertainty in Seismic Cone Penetration Testing.

Cajić, M., Karličić, D., Adhikari, S. (2024) Inerter-controlled topological interface states in locally resonant lattices with beyond-nearest neighbor coupling. Journal of Applied Physics, 135, (doi: 10.1063/5.0205248)

Byun, J.-E., Yi, S.-r. (2024) Anti-price-gouging law is neither good nor bad in itself: a proposal of narrative numeric method for transdisciplinary social discourses. npj Natural Hazards, 1, (doi: 10.1038/s44304-024-00005-y)

Blanche, J., Mitchell, D., Shang, J., Flynn, D., Pavuluri, S., Desmulliez, M. (2024) Dynamic analysis of geomaterials using microwave sensing. Scientific Reports, 14, (doi: 10.1038/s41598-024-57653-3)

Gupta, V., Adhikari, S., Bhattacharya, B. (2024) Evidence of nonlinearity tailoring in static and dynamic responses of honeycomb and auxetic hourglass lattice metastructures. Mechanics Research Communications, 137, (doi: 10.1016/j.mechrescom.2024.104261)

Achillopoulou, D. V., Kosta, A., Stamataki, N. K., Montalbano, A., Choffat, F. (2024) Efficiency of CFRP strengthening measures for reinforced concrete structural members using toughened epoxies. Construction Materials, 4, pp. 173-193. (doi: 10.3390/constrmater4010010)

Kim, Y., Idris, L. L. H., Das, S., Yau, P. C. (2024) Development Of Project-Based Learning In Civil Engineering. (doi: 10.21125/inted.2024.1558)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The nonlinear negative stiffness inertial amplifier base isolators for dynamic systems. Mechanics Based Design of Structures and Machines, 52, pp. 8430-8469. (doi: 10.1080/15397734.2024.2319113)

Sun, F., Febrianto, E., Fernando, H., Butler, L. J., Cirak, F., Hoult, N. A. (2023) Data-informed statistical finite element analysis of rail buckling. Computers and Structures, 289, (doi: 10.1016/j.compstruc.2023.107163)

Makhoul, N., Achillopoulou, D. V., Stamataki, N. K., Kromanis, R. (2023) Adaptive pathways using emerging technologies: Applications for critical transportation infrastructure. Sustainability, 15, (doi: 10.3390/su152316154)

Mirani, H., Gupta, V., Adhikari, S., Bhattacharya, B. (2023) Tailoring of interface modes in topologically protected edge states with hourglass lattice metamaterials. Journal of Sound and Vibration, 562, (doi: 10.1016/j.jsv.2023.117814)

Kim, J., Kim, Y., Satyanaga, A. (2023) Stability analysis for levee overflow failure due to water level fluctuation. Water, 15, (doi: 10.3390/w15193402)

Yuan, P., Adhikari, S., Dong, Y. (2023) A partitioned combined computational method for multi‐scale dynamic systems. International Journal for Numerical Methods in Engineering, 124, pp. 3494-3523. (doi: 10.1002/nme.7256)

Byun, J.-E., de Oliveira, W., Royset, J. O. (2023) S-BORM: reliability-based optimization of general systems using buffered optimization and reliability method. Reliability Engineering and System Safety, 236, (doi: 10.1016/j.ress.2023.109314)

Smith, M. G., Radford, J., Febrianto, E., Ramírez, J., O'Mahony, H., Matheson, A. B., Gibson, G. M., Faccio, D., Tassieri, M. (2023) Machine learning opens a doorway for microrheology with optical tweezers in living systems. AIP Advances, 13, (doi: 10.1063/5.0161014)

Patro, S. R., Banerjee, A., Adhikari, S., Ramana, G. V. (2023) Kaimal spectrum based H2 optimization of tuned mass dampers for wind turbines. Journal of Vibration and Control, 29, pp. 3175-3185. (doi: 10.1177/10775463221092838)

Thomoglou, A. K., Karabini, M. A., Achillopoulou, D. V., Rousakis, T. C., Chalioris, C. E. (2023) Failure mode prediction of unreinforced masonry (URM) walls retrofitted with cementitious textile reinforced mortar (TRM) Fibers, 11, (doi: 10.3390/fib11060053)

Yau, P. C., Kim, Y., Wong, D., Pang, P., Kan, S., Cao, Q. (2023) What Students Want to Have in the Post-Pandemic?: A Study about Computing Science Study Preferences and Mode of Study in Southeast Asia. (doi: 10.1145/3582580.3582591)

Zhu, C., Zhang, J., Shang, J., Ren, D., He, M. (2023) Advances in multifield and multiscale coupling of rock engineering. Energies, 16, (doi: 10.3390/en16104004)

Roy, A., Chakraborty, S., Adhikari, S. (2023) Reliability analysis of structures by active learning enhanced sparse Bayesian regression. Journal of Engineering Mechanics, 149, (doi: 10.1061/jenmdt.emeng-6964)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) Optimal design of inertial amplifier base isolators for dynamic response control of multi-storey buildings. International Journal of Structural Stability and Dynamics, 23, (doi: 10.1142/s0219455423500475)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimum inertial amplifier tuned mass dampers for nonlinear dynamic systems. International Journal of Applied Mechanics, 15, (doi: 10.1142/s1758825123500096)

Grassl, P. (2023) 3D lattice meso-scale modelling of the effect of lateral compression on tensile fracture processes in concrete. International Journal of Solids and Structures, 262-63, (doi: 10.1016/j.ijsolstr.2022.112086)

Bhattacharyya, A., Adhikari, S. (2023) Propagation characteristics of an elastic bar coupled with a discrete snap-through element. Nonlinear Dynamics, 111, pp. 2961-2990. (doi: 10.1007/s11071-022-08028-8)

Wang, M., Shang, J.L., Fan, L.F. (2022) Combined static-dynamic loading effect on the wave transmission properties in rock masses with macrojoint and microdefect. Rock Mechanics and Rock Engineering, 55, pp. 7747-7764. (doi: 10.1007/s00603-022-03057-6)

Byun, J.-E., D’Ayala, D. (2022) ResMapper: Matlab tool for seismic resilience mapping of large-scale road networks. SoftwareX, 20, (doi: 10.1016/j.softx.2022.101249)

Chandra, Y., Adhikari, S., Mukherjee, S., Mukhopadhyay, T. (2022) Unfolding the mechanical properties of buckypaper composites: nano- to macro-scale coupled atomistic-continuum simulations. Engineering with Computers, 38, pp. 5199-5229. (doi: 10.1007/s00366-021-01538-w)

Liu, X., Huang, L., Adhikari, S. (2022) Equivalent in-plane dynamic elastic moduli of lattice structures with Plateau borders. Composite Structures, 299, (doi: 10.1016/j.compstruct.2022.116056)

Febrianto, E., Butler, L., Girolami, M., Cirak, F. (2022) Digital twinning of self-sensing structures using the statistical finite element method. Data-Centric Engineering, 3, (doi: 10.1017/dce.2022.28)

Sia, V., Satyanaga, A., Kim, Y. (2022) Effects of heavy rainfall on shallow foundations in Bukit Timah Granite in Singapore. Applied Sciences, 12, (doi: 10.3390/app12199516)

Byun, J.-E., D'Ayala, D. (2022) Seismic Resilience Mapping of Large-Scale Transportation Networks: Applications to Network in Istanbul, Turkey.

Byun, J.-E., Straub, D. (2022) Active Learning of Deep Neural Networks for Reliability Analysis of Network Systems.

Liu, X., Liu, X., Adhikari, S., Zhao, X. (2022) An analytical framework for broadband dynamic analysis of plate built-up structures with uncertain viscoelastic boundary or connection conditions. Mechanical Systems and Signal Processing, 177, (doi: 10.1016/j.ymssp.2022.109121)

Byun, J.-E., Royset, J. O. (2022) Data-driven optimization of reliability using buffered failure probability. Structural Safety, 98, (doi: 10.1016/j.strusafe.2022.102232)

Hamdany, A. H., Satyanaga, A., Zhang, D., Kim, Y., Kim, J. R. (2022) Photocatalytic cementitious material for eco-efficient construction—a systematic literature review. Applied Sciences, 12, (doi: 10.3390/app12178741)

Satyanaga, A., Rangarajan, S., Rahardjo, H., Li, Y., Kim, Y. (2022) Soil database for development of soil properties envelope. Engineering Geology, 304, (doi: 10.1016/J.ENGGEO.2022.106698)

Singh, S. K., Banerjee, A., Varma, R. K., Adhikari, S., Das, S. (2022) Static and dynamic analysis of homogeneous Micropolar-Cosserat panels. Mechanics of Advanced Materials and Structures, 29, pp. 2757-2768. (doi: 10.1080/15376494.2021.1877377)

Adhikari, S., Mukherjee, S. (2022) The exact element stiffness matrices of stochastically parametered beams. Probabilistic Engineering Mechanics, 69, (doi: 10.1016/j.probengmech.2022.103317)

Byun, J.-E., Straub, D. (2022) Reliability Analysis of Transportation Networks Using Artificial Neural Networks.

Mihai, I. C., Bains, A., Grassl, P. (2022) Modelling of Cracking Mechanisms in Cementitious Materials: The Transition from Diffuse Microcracking to Localized Macrocracking. (doi: 10.1201/9781003316404-26)

Byun, J.-E., D’Ayala, D. (2022) Urban seismic resilience mapping: a transportation network in Istanbul, Turkey. Scientific Reports, 12, (doi: 10.1038/s41598-022-11991-2)

Liu, X., Lee, C.H., Grassl, P. (2022) On the Modelling of the Rate Dependence of Strength Using a Crack-band Based Damage Model for Concrete. CRC Press

Aldellaa, I., Havlásek, P., Jirásek, M., Grassl, P. (2022) Effect of creep on corrosion-induced cracking. Engineering Fracture Mechanics, 264, (doi: 10.1016/j.engfracmech.2022.108310)

Povala, J., Kazlauskaite, I., Febrianto, E., Cirak, F., Girolami, M. (2022) Variational Bayesian approximation of inverse problems using sparse precision matrices. Computer Methods in Applied Mechanics and Engineering, 393, (doi: 10.1016/j.cma.2022.114712)

Adhikari, S., Banerjee, A. (2022) Enhanced low-frequency vibration energy harvesting with inertial amplifiers. Journal of Intelligent Material Systems and Structures, 33, pp. 822-838. (doi: 10.1177/1045389X211032281)

Zhu, C., Karakus, M., He, M., Meng, Q., Shang, J., Wang, Y., Yin, Q. (2022) Volumetric deformation and damage evolution of Tibet interbedded skarn under multistage constant-amplitude-cyclic loading. International Journal of Rock Mechanics and Mining Sciences, 152, (doi: 10.1016/j.ijrmms.2022.105066)

Byun, J.-E. (2022) Physics-Informed Neural Networks for Traffic Assignment Optimization.

Liu, X., Lee, C. H., Grassl, P. (2022) On the Modelling of Spalling in Plain Concrete.

Abdelrhim, G., Grassl, P. (2022) Modelling the Failure of Steel Reinforced Concrete Frame Structures.

Liu, X., Liu, X., Adhikari, S., Yin, S. (2022) Extended Wittrick–Williams algorithm for eigenvalue solution of stochastic dynamic stiffness method. Mechanical Systems and Signal Processing, 166, (doi: 10.1016/j.ymssp.2021.108354)

Larsen, M. L., Arora, V., Adhikari, S., Clausen, H. B. (2022) Optimization of welded K-node in offshore jacket structure including the stochastic size effect. Marine Structures, 82, (doi: 10.1016/j.marstruc.2021.103128)

Adhikari, S., Chakraborty, S. (2022) Random matrix eigenvalue problems in structural dynamics: An iterative approach. Mechanical Systems and Signal Processing, 164, (doi: 10.1016/j.ymssp.2021.108260)

Mukherjee, S., Adhikari, S. (2022) The in-plane mechanics of a family of curved 2D lattices. Composite Structures, 280, (doi: 10.1016/j.compstruct.2021.114859)

Kim, Y., Rahardjo, H., Nistor, M. M., Satyanaga, A., Leong, E.-C., Sham, A. W. L. (2022) Assessment of critical rainfall scenarios for slope stability analyses based on historical rainfall records in Singapore. Environmental Earth Sciences, 81, (doi: 10.1007/s12665-021-10160-4)

Zhou, C., Grassl, P. (2022) A Damage-plasticity Approach for Modeling the Failure of Engineered Cementitious Composites.

Singh, A., Mukhopadhyay, T., Adhikari, S., Bhattacharya, B. (2022) Extreme on-demand contactless modulation of elastic properties in magnetostrictive lattices. Smart Materials and Structures, 31, (doi: 10.1088/1361-665x/ac9cac)

Aldellaa, I., Grassl, P. (2022) On Corrosion-induced Cracking in Reinforced Concrete with Different Corrosion Rates.

Ekop, I., Grassl, P. (2022) On Finite Element Modelling of Concrete Columns with Non-circular Cross-sections Confined with Carbon Fibre Reinforced Polymer.

Kim, S. Y., Na, W., Jun, C., Seo, H., Kim, Y. (2021) Hydrological performance of green roof systems: a numerical investigation. Frontiers in Environmental Science, 9, (doi: 10.3389/fenvs.2021.806697)

Byun, J.-E., Song, J. (2021) A general framework of Bayesian network for system reliability analysis using junction tree. Reliability Engineering and System Safety, 216, (doi: 10.1016/j.ress.2021.107952)

Xiao, F., Shang, J., Ayal, W., Zhiye, Z. (2021) Assessing fluid flow in rough rock fractures based on machine learning and electrical circuit model. Journal of Petroleum Science and Engineering, 206, (doi: 10.1016/j.petrol.2021.109126)

Royset, J. O., Byun, J.-E. (2021) Gradients and subgradients of buffered failure probability. Operations Research Letters, 49, pp. 868-873. (doi: 10.1016/j.orl.2021.10.004)

Pryse, S. E., Adhikari, S. (2021) Neumann enriched polynomial chaos approach for stochastic finite element problems. Probabilistic Engineering Mechanics, 66, (doi: 10.1016/j.probengmech.2021.103157)

Lakshminarayana, S., Adhikari, S., Maple, C. (2021) Analysis of IoT-based load altering attacks against power grids using the theory of second-order dynamical systems. IEEE Transactions on Smart Grid, 12, pp. 4415-4425. (doi: 10.1109/TSG.2021.3070313)

Kim, Y., Satyanaga, A., Rahardjo, H., Park, H., Sham, A. W. L. (2021) Estimation of effective cohesion using artificial neural networks based on index soil properties: a Singapore case. Engineering Geology, 289, (doi: 10.1016/j.enggeo.2021.106163)

Patrick, J., Adhikari, S., Hussein, M. I. (2021) Brillouin-zone characterization of piezoelectric material intrinsic energy-harvesting availability. Smart Materials and Structures, 30, (doi: 10.1088/1361-665X/ac0c2c)

Byun, J.-E., Song, J. (2021) Generalized matrix-based Bayesian network for multi-state systems. Reliability Engineering and System Safety, 211, (doi: 10.1016/j.ress.2021.107468)

Adhikari, S. (2021) The eigenbuckling analysis of hexagonal lattices: closed-form solutions. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 477, (doi: 10.1098/rspa.2021.0244)

Byun, J.-E. (2021) Seismic Resilience Analysis of Urban Transportation Networks using Bayesian Network.

Dwivedi, A., Banerjee, A., Adhikari, S., Bhattacharya, B. (2021) Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials. International Journal of Mechanics and Materials in Design, 17, pp. 419-439. (doi: 10.1007/s10999-021-09534-0)

Kim, Y., Rahardjo, H., Tsen-Tieng, D. L. (2021) Mechanical behavior of trees with structural defects under lateral load: a numerical modeling approach. Urban Forestry and Urban Greening, 59, (doi: 10.1016/j.ufug.2021.126987)

Girolami, M., Febrianto, E., Yin, G., Cirak, F. (2021) The statistical finite element method (statFEM) for coherent synthesis of observation data and model predictions. Computer Methods in Applied Mechanics and Engineering, 375, (doi: 10.1016/j.cma.2020.113533)

Chatterjee, T., Karličić, D., Adhikari, S., Friswell, M. I. (2021) Gaussian process assisted stochastic dynamic analysis with applications to near-periodic structures. Mechanical Systems and Signal Processing, 149, (doi: 10.1016/j.ymssp.2020.107218)

Febrianto, E., Ortiz, M., Cirak, F. (2021) Mollified finite element approximants of arbitrary order and smoothness. Computer Methods in Applied Mechanics and Engineering, 373, (doi: 10.1016/j.cma.2020.113513)

Satyanaga, A., Kim, Y., Hamdany, A. H., Nistor, M.-M., Sham, A. W. L., Rahardjo, H. (2021) Preventive measures for rainfall-induced slope failures in Singapore. Elsevier

Karličić, D., Chatterjee, T., Cajić, M., Adhikari, S. (2020) Parametrically amplified Mathieu-Duffing nonlinear energy harvesters. Journal of Sound and Vibration, 488, (doi: 10.1016/j.jsv.2020.115677)

Karličić, D., Cajić, M., Paunović, S., Adhikari, S. (2020) Nonlinear energy harvester with coupled Duffing oscillators. Communications in Nonlinear Science and Numerical Simulation, 91, (doi: 10.1016/j.cnsns.2020.105394)

Leppänen, J., Johansson, M., Grassl, P. (2020) On the dynamic response of reinforced concrete beams subjected to drop weight impact. Finite Elements in Analysis and Design, 180, (doi: 10.1016/j.finel.2020.103438)

Sciegaj, A., Grassl, P., Larsson, F., Runesson, K., Lundgren, K. (2020) Upscaling of three-dimensional reinforced concrete representative volume elements to effective beam and plate models. International Journal of Solids and Structures, 202, pp. 835-853. (doi: 10.1016/j.ijsolstr.2020.07.006)

Malaji, P. V., Friswell, M. I., Adhikari, S., Litak, G. (2020) Enhancement of harvesting capability of coupled nonlinear energy harvesters through high energy orbits. AIP Advances, 10, (doi: 10.1063/5.0014426)

Bhaskar, J., Kumar Sharma, A., Bhattacharya, B., Adhikari, S. (2020) A review on shape memory alloy reinforced polymer composite materials and structures. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab8836)

Chandra, Y., Saavedra Flores, E.I., Adhikari, S. (2020) Buckling of 2D nano hetero-structures with moire patterns. Computational Materials Science, 177, (doi: 10.1016/j.commatsci.2019.109507)

Hu, J.-h., Ren, Q.-f., Yang, D.-j., Ma, S.-w., Shang, J.-l., Ding, X.-t., Luo, Z.-q. (2020) Cross-scale characteristics of backfill material using NMR and fractal theory. Transactions of Nonferrous Metals Society of China, 30, pp. 1347-1363. (doi: 10.1016/S1003-6326(20)65301-8)

Chandra, Y., Adhikari, S., Saavedra Flores, E.I., Figiel, L. (2020) Advances in finite element modelling of graphene and associated nanostructures. Materials Science and Engineering R: Reports, 140, (doi: 10.1016/j.mser.2020.100544)

Rahardjo, H., Kim, Y., Gofar, N., Satyanaga, A. (2020) Analyses and design of steep slope with GeoBarrier system (GBS) under heavy rainfall. Geotextiles and Geomembranes, (doi: 10.1016/j.geotexmem.2019.11.010)

Wang, F., Cao, P., Wang, Y., Hao, R., Meng, J., Shang, J. (2020) Combined effects of cyclic load and temperature fluctuation on the mechanical behavior of porous sandstones. Engineering Geology, 266, (doi: 10.1016/j.enggeo.2019.105466)

Kim, Y., Rahardjo, H., Thang, N. C. (2020) Elastoplastic behavior of compacted kaolin under consolidated drained and shearing infiltration conditions. Geotechnical Testing Journal, 43, pp. 414-435. (doi: 10.1520/gtj20180218)

Kim, Y., Rahardjo, H., Tsen-Tieng, D. L. (2020) Stability analysis of laterally loaded trees based on tree-root-soil interaction. Urban Forestry and Urban Greening, 49, (doi: 10.1016/j.ufug.2020.126639)

Adhikari, S., Rastogi, A., Bhattacharya, B. (2020) Piezoelectric vortex induced vibration energy harvesting in a random flow field. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab519f)

Shang, J. (2020) Rupture of veined granite in polyaxial compression: insights from three‐dimensional discrete element method modeling. Journal of Geophysical Research: Solid Earth, 125, (doi: 10.1029/2019JB019052)

Chandra, Y., Mukhopadhyay, T., Adhikari, S., Figiel, Ł. (2020) Size-dependent dynamic characteristics of graphene based multi-layer nano hetero-structures. Nanotechnology, 31, (doi: 10.1088/1361-6528/ab6231)

Duan, K., Kwok, C. Y., Zhang, Q., Shang, J. (2020) On the initiation, propagation and reorientation of simultaneously-induced multiple hydraulic fractures. Computers and Geotechnics, 117, (doi: 10.1016/j.compgeo.2019.103226)

Ganguli, R., Adhikari, S. (2020) The digital twin of discrete dynamic systems: Initial approaches and future challenges. Applied Mathematical Modelling, 77, pp. 1110-1128. (doi: 10.1016/j.apm.2019.09.036)

Jacquelin, E., Brizard, D., Adhikari, S., Friswell, M.I. (2020) Time-domain response of damped stochastic multiple-degree-of-freedom systems. Journal of Engineering Mechanics, 146, (doi: 10.1061/(ASCE)EM.1943-7889.0001705)

Adhikari, S., Bhattacharjee, B., Bhattacharjee, J. (2020) Preface. Lecture Notes in Civil Engineering, 38, pp. v-vi.

Kim, Y., Lim, H., Jeong, S. (2020) Seismic response of vertical shafts in multi-layered soil using dynamic and pseudo-static analyses. Geomechanics and Engineering, 21, pp. 269-277. (doi: 10.12989/GAE.2020.21.3.269)

Jayasinghe, L.B., Shang, J., Zhao, Z., Goh, A.T.C. (2019) Numerical investigation into the blasting-induced damage characteristics of rocks considering the role of in-situ stresses and discontinuity persistence. Computers and Geotechnics, 116, (doi: 10.1016/j.compgeo.2019.103207)

Gui, Y.L., Shang, J.L., Ma, J.J., Zhao, Z.Y. (2019) Numerical study of the circular opening effect on mechanical behaviour of rock under confinement. Journal of Rock Mechanics and Geotechnical Engineering, 11, pp. 1201-1210. (doi: 10.1016/j.jrmge.2019.07.003)

Shang, J., Layasinghe, L.B., Xiao, F., Duan, K., Nie, W., Zhao, Z. (2019) Three-dimensional DEM investigation of the fracture behaviour of thermally degraded rocks with consideration of material anisotropy. Theoretical and Applied Fracture Mechanics, 104, (doi: 10.1016/j.tafmec.2019.102330)

Kim, Y., Rahardjo, H., Satyanaga, A. (2019) Susceptibility assessment of slope failures in Singapore using GIS-based prediction models. Springer

Lee, K., Kim, Y., Ko, J., Jeong, S. (2019) A study on the debris flow-induced impact force on check dam with- and without-entrainment. Computers and Geotechnics, 113, (doi: 10.1016/j.compgeo.2019.103104)

Ma, S., Zhao, Z., Shang, J. (2019) An analytical model for shear behaviour of bolted rock joints. International Journal of Rock Mechanics and Mining Sciences, 121, (doi: 10.1016/j.ijrmms.2019.04.005)

Grassl, P., Middlemiss, J. (2019) Finite Element Modelling of Tensile Reinforcement Laps in Steel Fibre Reinforced Concrete. (doi: 10.1201/9780429426506-110)

Xiao, F., Shang, J., Zhao, Z. (2019) DDA based grouting prediction and linkage between fracture aperture distribution and grouting characteristics. Computers and Geotechnics, 112, pp. 350-369. (doi: 10.1016/j.compgeo.2019.04.028)

Martinez-Ayuso, G., Friswell, M.I., Haddad Khodaparast, H., Adhikari, S. (2019) Experimental validation of an impact off-resonance energy harvester. European Physical Journal: Special Topics, 228, pp. 1635-1646. (doi: 10.1140/epjst/e2019-800155-0)

Duncheva, T., Bradley, F. F. (2019) Multifaceted productivity comparison of off-site timber manufacturing strategies in mainland Europe and the United Kingdom. Journal of Construction Engineering and Management, 145, (doi: 10.1061/(ASCE)CO.1943-7862.0001641)

Kong, F., Shang, J. (2019) Reply to discussion of “A Validation Study for the Estimation of Uniaxial Compressive Strength Based on Index Tests” by Kong and Shang, Rock Mech and Rock Eng (2018) Rock Mechanics and Rock Engineering, 52, pp. 2719-2720. (doi: 10.1007/s00603-019-01880-y)

Grassl, P., Jirásek, M., Gallipoli, D. (2019) Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere. European Journal of Mechanics - A/Solids, 76, pp. 123-134. (doi: 10.1016/j.euromechsol.2019.04.004)

Rahardjo, H., Kim, Y., Satyanaga, A. (2019) Role of unsaturated soil mechanics in geotechnical engineering. International Journal of Geo-Engineering, 10, (doi: 10.1186/s40703-019-0104-8)

Hu, J.-h., Ren, Q.-f., Ma, S.-w., Jian, Q., Jiang, Y.-j., Shang, J.-l., Luo, Z.-q. (2019) Macroscopic and microscopic trans-scale characteristics of pore structure of mine grouting materials. Transactions of Nonferrous Metals Society of China, 29, pp. 1067-1081. (doi: 10.1016/S1003-6326(19)65015-6)

Batou, A., Adhikari, S. (2019) Optimal parameters of viscoelastic tuned-mass dampers. Journal of Sound and Vibration, 445, pp. 17-28. (doi: 10.1016/j.jsv.2019.01.010)

Grassl, P. (2019) On the Influence of Fibres on Tensile Laps of Reinforcement Loops.

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Theoretical limits for negative elastic moduli in subacoustic lattice materials. Physical Review B, 99, (doi: 10.1103/PhysRevB.99.094108)

Scarth, C., Adhikari, S., Cabral, P.H., Silva, G.H.C., Prado, A.P.D. (2019) Random field simulation over curved surfaces: applications to computational structural mechanics. Computer Methods in Applied Mechanics and Engineering, 345, pp. 283-301. (doi: 10.1016/j.cma.2018.10.026)

Nie, W., Zhao, Z.Y., Guo, W., Shang, J., Wu, C. (2019) Bond-slip modeling of a CMC rockbolt element using 2D-DDA method. Tunnelling and Underground Space Technology, 85, pp. 340-353. (doi: 10.1016/j.tust.2018.12.025)

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Probing the frequency-dependent elastic moduli of lattice materials. Acta Materialia, 165, pp. 654-665. (doi: 10.1016/j.actamat.2018.11.012)

Dove, C. A., Bradley, F. F., Patwardhan, S. V. (2019) A material characterization and embodied energy study of novel clay-alginate composite aerogels. Energy and Buildings, 184, pp. 88-98. (doi: 10.1016/j.enbuild.2018.10.045)

Dey, S., Mukhopadhyay, T., Naskar, S., Dey, T.K., Chalak, H.D., Adhikari, S. (2019) Probabilistic characterisation for dynamics and stability of laminated soft core sandwich plates. Journal of Sandwich Structures and Materials, 21, pp. 366-397. (doi: 10.1177/1099636217694229)

Grassl, P., Antonelli, A. (2019) 3D network modelling of fracture processes in fibre-reinforced geomaterials. International Journal of Solids and Structures, 156-57, pp. 234-242. (doi: 10.1016/j.ijsolstr.2018.08.019)

Aliyu, M.M., Shang, J., Murphy, W., Lawrence, J.A., Collier, R., Kong, F., Zhao, Z. (2019) Assessing the uniaxial compressive strength of extremely hard cryptocrystalline flint. International Journal of Rock Mechanics and Mining Sciences, 113, pp. 310-321. (doi: 10.1016/j.ijrmms.2018.12.002)

Yokota, Y., Zhao, Z., Shang, J., Nie, W., Date, K., Iwano, K., Okada, Y. (2019) Effect of bolt configuration on the interface behaviour between a rock bolt and bond material: a comprehensive DDA investigation. Computers and Geotechnics, 105, pp. 116-128. (doi: 10.1016/j.compgeo.2018.09.017)

Mukhopadhyay, T., Adhikari, S., Batou, A. (2019) Frequency domain homogenization for the viscoelastic properties of spatially correlated quasi-periodic lattices. International Journal of Mechanical Sciences, 150, pp. 784-806. (doi: 10.1016/j.ijmecsci.2017.09.004)

Grassl, P. (2019) Modelling the Dynamic Response of Concrete with the Damage Plasticity Model CDPM2.

Sciegaj, A., Grassl, P., Larsson, F., Lundgren, K., Runesson, K. (2019) On Periodic Boundary Conditions in Variationally Consistent Homogenisation of Beams and Plates.

Shang, J., Duan, K., Gui, Y., Handley, K., Zhao, Z. (2018) Numerical investigation of the direct tensile behaviour of laminated and transversely isotropic rocks containing incipient bedding planes with different strengths. Computers and Geotechnics, 104, pp. 373-388. (doi: 10.1016/j.compgeo.2017.11.007)

Kim, J., Hwang, W., Kim, Y. (2018) Effects of hysteresis on hydro-mechanical behavior of unsaturated soil. Engineering Geology, 245, pp. 1-9. (doi: 10.1016/j.enggeo.2018.08.004)

Shang, J., Zhao, Z., Hu, J., Handley, K. (2018) 3D particle-based DEM investigation into the shear behaviour of incipient rock joints with various geometries of rock bridges. Rock Mechanics and Rock Engineering, 51, pp. 3563-3584. (doi: 10.1007/s00603-018-1531-0)

Shang, J., Chua, Z., Peh, H., Zhao, Z. (2018) A Preliminary Study of the Economic Dimension of Underground Rock Caverns for Water Storage at Singapore. (doi: 10.1109/WEEF-GEDC.2018.8629647)

Shang, J., Yokota, Y., Zhao, Z., Dang, W. (2018) DEM simulation of mortar-bolt interface behaviour subjected to shearing. Construction and Building Materials, 185, pp. 120-137. (doi: 10.1016/j.conbuildmat.2018.07.044)

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Sample-based and sample-aggregated based Galerkin projection schemes for structural dynamics. Probabilistic Engineering Mechanics, 54, pp. 118-130. (doi: 10.1016/j.probengmech.2017.09.002)

Rahardjo, J., Kim, Y., Gofar, N., Leong, E. C., Wang, C. L., Wong, J. L.H. (2018) Field instrumentations and monitoring of GeoBarrier System for steep slope protection. Transportation Geotechnics, 16, pp. 29-42. (doi: 10.1016/j.trgeo.2018.06.006)

Gallipoli, D., Grassl, P., Wheeler, S., Gens, A. (2018) On the choice of stress–strain variables for unsaturated soils and its effect on plastic flow. Geomechanics for Energy and the Environment, 15, pp. 3-9. (doi: 10.1016/j.gete.2018.02.002)

Pryse, S.E., Kundu, A., Adhikari, S. (2018) Projection methods for stochastic dynamic systems: A frequency domain approach. Computer Methods in Applied Mechanics and Engineering, 338, pp. 412-439. (doi: 10.1016/j.cma.2018.04.025)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C. (2018) Spectral element-based method for a one-dimensional damaged structure with distributed random properties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, (doi: 10.1007/s40430-018-1330-2)

Shang, J., Gui, Y., Zhao, Z. (2018) Broad-spectrum fracture toughness of an anisotropic sandstone under mixed-mode loading. Theoretical and Applied Fracture Mechanics, 96, pp. 556-575. (doi: 10.1016/j.tafmec.2018.07.005)

Karličić, D., Cajić, M., Adhikari, S. (2018) Dynamic stability of a nonlinear multiple-nanobeam system. Nonlinear Dynamics, 93, pp. 1495-1517. (doi: 10.1007/s11071-018-4273-3)

Shang, J., West, L.J., Hencher, S.R., Zhao, Z. (2018) Tensile strength of large-scale incipient rock joints: a laboratory investigation. Acta Geotechnica, 13, pp. 869-886. (doi: 10.1007/s11440-017-0620-7)

Shang, J., West, L.J., Hencher, S.R., Zhao, Z. (2018) Geological discontinuity persistence: Implications and quantification. Engineering Geology, 241, pp. 41-54. (doi: 10.1016/j.enggeo.2018.05.010)

Kong, F., Shang, J. (2018) A validation study for the estimation of uniaxial compressive strength based on index tests. Rock Mechanics and Rock Engineering, 51, pp. 2289-2297. (doi: 10.1007/s00603-018-1462-9)

Jeong, S., Kim, Y., Park, H., Kim, J. (2018) Effects of rainfall infiltration and hysteresis on the settlement of shallow foundations in unsaturated soil. Environmental Earth Sciences, 77, (doi: 10.1007/s12665-018-7690-1)

Shang, J., Zhao, Z., Aliyu, M.M. (2018) Stresses induced by a demolition agent in non-explosive rock fracturing. International Journal of Rock Mechanics and Mining Sciences, 107, pp. 172-180. (doi: 10.1016/j.ijrmms.2018.04.049)

Zhang, D.P., Lei, Y.J., Adhikari, S. (2018) Flexoelectric effect on vibration responses of piezoelectric nanobeams embedded in viscoelastic medium based on nonlocal elasticity theory. Acta Mechanica, 229, pp. 2379-2392. (doi: 10.1007/s00707-018-2116-4)

Rahardjo, H., Thang, N. C., Kim, Y., Leong, E.-C. (2018) Unsaturated elasto-plastic constitutive equations for compacted kaolin under consolidated drained and shearing-infiltration conditions. Soils and Foundations, 58, pp. 534-546. (doi: 10.1016/j.sandf.2018.02.019)

Madinei, H., Haddad Khodaparast, H., Friswell, M.I., Adhikari, S. (2018) Minimising the effects of manufacturing uncertainties in MEMS Energy harvesters. Energy, 149, pp. 990-999. (doi: 10.1016/j.energy.2018.02.048)

Kim, Y., Rahardjo, H., Satyanaga, A. (2018) Numerical simulations of triaxial shearing-infiltration tests. Soils and Foundations, 58, pp. 398-411. (doi: 10.1016/j.sandf.2018.02.009)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C., Arruda, J.R.F. (2018) Estimation of beam material random field properties via sensitivity-based model updating using experimental frequency response functions. Mechanical Systems and Signal Processing, 102, pp. 180-197. (doi: 10.1016/j.ymssp.2017.08.039)

Shang, J., Zhao, Z., Ma, S. (2018) On the shear failure of incipient rock discontinuities under CNL and CNS boundary conditions: insights from DEM modelling. Engineering Geology, 234, pp. 153-166. (doi: 10.1016/j.enggeo.2018.01.012)

Grassl, P., Johansson, M., Leppänen, J. (2018) On the numerical modelling of bond for the failure analysis of reinforced concrete. Engineering Fracture Mechanics, 189, pp. 13-26. (doi: 10.1016/j.engfracmech.2017.10.008)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2018) Probing the shear modulus of two-dimensional multiplanar nanostructures and heterostructures. Nanoscale, 10, pp. 5280-5294. (doi: 10.1039/c7nr07261a)

Grassl, P., Antonelli, A. (2018) Network Modelling of Fracture Processes in Fibre-Reinforced Quasi-Brittle Materials.

Athanasiadis, I., Wheeler, S. J., Grassl, P. (2018) Hydro-mechanical network modelling of particulate composites. International Journal of Solids and Structures, 130-31, pp. 49-60. (doi: 10.1016/j.ijsolstr.2017.10.017)

Dey, S., Mukhopadhyay, T., Sahu, S.K., Adhikari, S. (2018) Stochastic dynamic stability analysis of composite curved panels subjected to non-uniform partial edge loading. European Journal of Mechanics - A/Solids, 67, pp. 108-122. (doi: 10.1016/j.euromechsol.2017.09.005)

Adhikari, S., Friswell, M.I. (2018) A Stochastic Multidomain Approach for Mid-frequency Vibration Problems.

Malaji, P.V., Doddi, S., Friswell, M.I., Adhikari, S. (2018) Analysis of Pendulums Coupled by Torsional Springs for Energy Harvesting. (doi: 10.1051/matecconf/201821105008)

Shang, J., Zhao, Z., Gui, Y. (2018) Particulate DEM Simulation of Thermal Effect on Fracture Toughness of Rock.

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Projection Methods for Stochastic Structural Dynamics. (doi: 10.1051/matecconf/201821101003)

Maneshi, M.A., Ghavanloo, E., Fazelzadeh, S.A., Friswell, M.I., Adhikari, S. (2018) Semi-analytical Solution for Postbuckling Behavior of Highly Deformable Nanobeams.

Khodaparast, H. H., Govers, Y., Dayyani, I., Adhikari, S., Link, M., Friswell, M.I., Mottershead, J.E., Sienz, J. (2017) Fuzzy finite element model updating of the DLR AIRMOD test structure. Applied Mathematical Modelling, 52, pp. 512-526. (doi: 10.1016/j.apm.2017.08.001)

Kim, J., Kim, Y., Jeong, S., Hong, M. (2017) Rainfall-induced landslides by deficit field matric suction in unsaturated soil slopes. Environmental Earth Sciences, 76, (doi: 10.1007/s12665-017-7127-2)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective mechanical properties of multilayer nano-heterostructures. Scientific Reports, 7, (doi: 10.1038/s41598-017-15664-3)

Shang, J., Hencher, S.R., West, L.J., Handley, K. (2017) Forensic excavation of rock masses: a technique to investigate discontinuity persistence. Rock Mechanics and Rock Engineering, 50, pp. 2911-2928. (doi: 10.1007/s00603-017-1290-3)

Scarth, C., Adhikari, S. (2017) Modeling spatially varying uncertainty in composite structures using lamination parameters. AIAA Journal, 55, pp. 3951-3965. (doi: 10.2514/1.J055705)

Pryse, S.E., Adhikari, S. (2017) Stochastic finite element response analysis using random eigenfunction expansion. Computers and Structures, 192, pp. 1-15. (doi: 10.1016/j.compstruc.2017.06.014)

Mukhopadhyay, T., Adhikari, S. (2017) Effective in-plane elastic moduli of quasi-random spatially irregular hexagonal lattices. International Journal of Engineering Science, 119, pp. 142-179. (doi: 10.1016/j.ijengsci.2017.06.004)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Polynomial chaos-based extended Padé expansion in structural dynamics. International Journal for Numerical Methods in Engineering, 111, pp. 1170-1191. (doi: 10.1002/nme.5497)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) Robust design optimization for crashworthiness of vehicle side impact. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 3, (doi: 10.1115/1.4035439)

Kim, Y., Jeong, S. (2017) Modeling of shallow landslides in an unsaturated soil slope using a coupled model. Geomechanics and Engineering, 13, pp. 353-370. (doi: 10.12989/gae.2017.13.2.353)

Kim, Y., Park, H., Jeong, S. (2017) Settlement behavior of shallow foundations in unsaturated soils under rainfall. Sustainability, 9, (doi: 10.3390/su9081417)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2017) Metamodel based high-fidelity stochastic analysis of composite laminates: a concise review with critical comparative assessment. Composite Structures, 171, pp. 227-250. (doi: 10.1016/j.compstruct.2017.01.061)

Mukhopadhyay, T., Chakraborty, S., Dey, S., Adhikari, S., Chowdhury, R. (2017) A critical assessment of Kriging model variants for high-fidelity uncertainty quantification in dynamics of composite shells. Archives of Computational Methods in Engineering, 24, pp. 495-518. (doi: 10.1007/s11831-016-9178-z)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) A surrogate based multi-fidelity approach for robust design optimization. Applied Mathematical Modelling, 47, pp. 726-744. (doi: 10.1016/j.apm.2017.03.040)

Jeong, S., Lee, K., Kim, J., Kim, Y. (2017) Analysis of rainfall-induced landslide on unsaturated soil slopes. Sustainability, 9, (doi: 10.3390/su9071280)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) Efficient system reliability analysis of earth slopes based on support vector machine regression model. Academic Press

Boulkaibet, I., Mthembu, L., Marwala, T., Friswell, M.I., Adhikari, S. (2017) Finite element model updating using Hamiltonian Monte Carlo techniques. Inverse Problems in Science and Engineering, 25, pp. 1042-1070. (doi: 10.1080/17415977.2016.1215446)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) System reliability analysis of soil slopes with general slip surfaces using multivariate adaptive regression splines. Computers and Geotechnics, 87, pp. 212-228. (doi: 10.1016/j.compgeo.2017.02.017)

Karličić, D., Cajić, M., Adhikari, S., Kozić, P., Murmu, T. (2017) Vibrating nonlocal multi-nanoplate system under inplane magnetic field. European Journal of Mechanics - A/Solids, 64, pp. 29-45. (doi: 10.1016/j.euromechsol.2017.01.013)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective elastic properties of two dimensional multiplanar hexagonal nanostructures. 2D Materials, 4, (doi: 10.1088/2053-1583/aa551c)

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Berger, H. (2017) Homogenization of porous piezoelectric materials. International Journal of Solids and Structures, 113-14, pp. 218-229. (doi: 10.1016/j.ijsolstr.2017.03.003)

Machado, M. R., Adhikari, S., Dos Santos, J. M. C. (2017) A spectral approach for damage quantification in stochastic dynamic systems. Mechanical Systems and Signal Processing, 88, pp. 253-273. (doi: 10.1016/j.ymssp.2016.11.018)

Fahy, C., Wheeler, S. J., Gallipoli, D., Grassl, P. (2017) Corrosion induced cracking modelled by a coupled transport-structural approach. Cement and Concrete Research, 94, pp. 24-35. (doi: 10.1016/j.cemconres.2017.01.007)

Khodaparast, H. H., Madinei, H., Friswell, M. I., Adhikari, S., Coggon, S., Cooper, J. E. (2017) An extended harmonic balance method based on incremental nonlinear control parameters. Mechanical Systems and Signal Processing, 85, pp. 716-729. (doi: 10.1016/j.ymssp.2016.09.008)

Mukhopadhyay, T., Adhikari, S. (2017) Stochastic mechanics of metamaterials. Composite Structures, 162, pp. 85-97. (doi: 10.1016/j.compstruct.2016.11.080)

Naskar, S., Mukhopadhyay, T., Sriramula, S., Adhikari, S. (2017) Stochastic natural frequency analysis of damaged thin-walled laminated composite beams with uncertainty in micromechanical properties. Composite Structures, 160, pp. 312-334. (doi: 10.1016/j.compstruct.2016.10.035)

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Featherston, C. A. (2017) Energy harvesting using porous piezoelectric beam with impacts. Procedia Engineering, 199, pp. 3468-3473. (doi: 10.1016/j.proeng.2017.09.454)

Arora, V., Friswell, M., Adhikari, S. (2017) FRF-based Probabilistic Model Updating in Structural Dynamics for Uncertainty Identification and Quantification.

Adhikari, S. (2017) Inertial mass sensing with low Q-factor vibrating microcantilevers. Journal of Applied Physics, 122, (doi: 10.1063/1.4993678)

Madinei, H., Khodaparast, H.H., Friswell, M.I., Adhikari, S., Shaw, A.D. (2017) Nonlinear MEMS Piezoelectric Harvesters in the presence of geometric and structural variabilities. Procedia Engineering, 199, pp. 3456-3461. (doi: 10.1016/j.proeng.2017.09.451)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Steady-state response of a random dynamical system described with Padé approximants and random eigenmodes. Procedia Engineering, 199, pp. 1104-1109. (doi: 10.1016/j.proeng.2017.09.212)

Madinei, H., Khodaparast, H. H., Adhikari, S., Friswell, M. I. (2016) Design of MEMS piezoelectric harvesters with electrostatically adjustable resonance frequency. Mechanical Systems and Signal Processing, 81, pp. 360-374. (doi: 10.1016/j.ymssp.2016.03.023)

Kim, Y., Jeong, S., Kim, J. (2016) Coupled infiltration model of unsaturated porous media for steady rainfall. Soils and Foundations, 56, pp. 1071-1081. (doi: 10.1016/j.sandf.2016.11.010)

Athanasiadis, I., Wheeler, S., Grassl, P. (2016) Network modelling of the influence of swelling on the transport behaviour of bentonite. Geosciences, 6, (doi: 10.3390/geosciences6040055)

Mukhopadhyay, T., Mahata, A., Dey, S., Adhikari, S. (2016) Probabilistic analysis and design of HCP nanowires: an efficient surrogate based molecular dynamics simulation approach. Journal of Materials Science and Technology, 32, pp. 1345-1351. (doi: 10.1016/j.jmst.2016.07.019)

Dey, S., Mukhopadhyay, T., Sahu, S. K., Adhikari, S. (2016) Effect of cutout on stochastic natural frequency of composite curved panels. Composites Part B: Engineering, 105, pp. 188-202. (doi: 10.1016/j.compositesb.2016.08.028)

Mukhopadhyay, T., Adhikari, S. (2016) Free-vibration analysis of sandwich panels with randomly irregular honeycomb core. Journal of Engineering Mechanics, 142, (doi: 10.1061/(ASCE)EM.1943-7889.0001153)

Dove, C. A., Bradley, F. F., Patwardhan, S. V. (2016) Seaweed biopolymers as additives for unfired clay bricks. Materials and Structures, 49, pp. 4463-4482. (doi: 10.1617/s11527-016-0801-0)

Shang, J., Hencher, S.R., West, L.J. (2016) Tensile strength of geological discontinuities including incipient bedding, rock joints and mineral veins. Rock Mechanics and Rock Engineering, 49, pp. 4213-4225. (doi: 10.1007/s00603-016-1041-x)

Bradley, F. (2016) A Comparison between Volumetric Timber Manufacturing Strategies in the UK and Mainland Europe.

Chandra, Y., Scarpa, F., Adhikari, S., Zhang, J., Saavedra Flores, E. I., Peng, H.-X. (2016) Pullout strength of graphene and carbon nanotube/epoxy composites. Composites Part B: Engineering, 102, pp. 1-8. (doi: 10.1016/j.compositesb.2016.06.070)

Garcia-Macias, E., Castro-Triguero, R., Friswell, M. I., Adhikari, S., Saez, A. (2016) Metamodel-based approach for stochastic free vibration analysis of functionally graded carbon nanotube reinforced plates. Composite Structures, 152, pp. 183-198. (doi: 10.1016/j.compstruct.2016.05.019)

Xenos, D., Grassl, P. (2016) Modelling the failure of reinforced concrete with nonlocal and crack band approaches using the damage-plasticity model CDPM2. Finite Elements in Analysis and Design, 117-8, pp. 11-20. (doi: 10.1016/j.finel.2016.04.002)

Athanasiadis, I., Wheeler, S. J., Grassl, P. (2016) Network Modelling of Fluid Retention Behaviour in Unsaturated Soils. (doi: 10.1051/e3sconf/20160911016)

Chandra, Y., Saavedra Flores, E. I., Scarpa, F., Adhikari, S. (2016) Buckling of hybrid nanocomposites with embedded graphene and carbon nanotubes. Physica E: Low-Dimensional Systems and Nanostructures, 83, pp. 434-441. (doi: 10.1016/j.physe.2016.01.021)

Madinei, H., Haddad Khodaparast, H., Friswell, M.I., Adhikari, S. (2016) Improving Performance of MEMS Piezoelectric Harvesters in the Presence of Manufacturing Uncertainties.

Grassl, P., Bolander, J. (2016) Three-dimensional network model for coupling of fracture and mass transport in quasi-brittle geomaterials. Materials, 9, (doi: 10.3390/ma9090782)

Mukhopadhyay, T., Adhikari, S. (2016) Equivalent in-plane elastic properties of irregular honeycombs: an analytical approach. International Journal of Solids and Structures, 91, pp. 169-184. (doi: 10.1016/j.ijsolstr.2015.12.006)

Jacquelin, E., Adhikari, S., Friswell, M. I., Sinou, J. -J. (2016) Role of roots of orthogonal polynomials in the dynamic response of stochastic systems. Journal of Engineering Mechanics, 142, (doi: 10.1061/(ASCE)EM.1943-7889.0001102)

Jacquelin, E., Friswell, M. I., Adhikari, S., Dessombz, O., Sinou, J. -J. (2016) Polynomial chaos expansion with random and fuzzy variables. Mechanical Systems and Signal Processing, 75, pp. 41-56. (doi: 10.1016/j.ymssp.2015.12.001)

Adhikari, S. (2016) Boron nitride nanotubes as bionanosensors. William Andrew

Adhikari, S., Friswell, M.I., Litak, G., Khodaparast, H. H. (2016) Design and analysis of vibration energy harvesters based on peak response statistics. Smart Materials and Structures, 25, (doi: 10.1088/0964-1726/25/6/065009)

Dey, S., Naskar, S., Mukhopadhyay, T., Gohs, U., Spickenheuer, A., Bittrich, L., Sriramula, S., Adhikari, S., Heinrich, G. (2016) Uncertain natural frequency analysis of composite plates including effect of noise - a polynomial neural network approach. Composite Structures, 143, pp. 130-142. (doi: 10.1016/j.compstruct.2016.02.007)

Madinei, H., Haddad Khodaparast, H., Adhikari, S., Friswell, M.I. (2016) A hybrid piezoelectric and electrostatic vibration energy harvester. Springer

Boulkaibet, I., Marwala, T., Friswell, M.I., Adhikari, S. (2016) An adaptive markov Chain monte carlo method for Bayesian finite element model updating. Springer

Friswell, M. I., Chandrashaker, A., Adhikari, S. (2016) An energy measure for mode localization. Springer

Havlasek, P., Grassl, P., Jirásek, M. (2016) Analysis of size effect on strength of quasi-brittle materials using integral-type nonlocal models. Engineering Fracture Mechanics, 157, pp. 72-85. (doi: 10.1016/j.engfracmech.2016.02.029)

Litak, G., Friswell, M. I., Adhikari, S. (2016) Regular and chaotic vibration in a piezoelectric energy harvester. Meccanica, 51, pp. 1017-1025. (doi: 10.1007/s11012-015-0287-9)

Adhikari, S., Khodaparast, H. H. (2016) Mass and Rotary Inertia Sensing from Vibrating Cantilever Nanobeams. (doi: 10.1117/12.2222116)

Dey, S., Mukhopadhyay, T., Spickenheuer, A., Adhikari, S., Heinrich, G. (2016) Bottom up surrogate based approach for stochastic frequency response analysis of laminated composite plates. Composite Structures, 140, pp. 712-727. (doi: 10.1016/j.compstruct.2016.01.039)

Mukhopadhyay, T., Naskar, S., Dey, S., Adhikari, S. (2016) On quantifying the effect of noise in surrogate based stochastic free vibration analysis of laminated composite shallow shells. Composite Structures, 140, pp. 798-805. (doi: 10.1016/j.compstruct.2015.12.037)

Khodaparast, H. H., Madinei, H., Friswell, M. I., Adhikari, S. (2016) Vibration Suppression in MEMS Devices Using Electrostatic Forces. (doi: 10.1117/12.2222069)

Mukhopadhyay, T., Adhikari, S. (2016) Effective in-plane elastic properties of auxetic honeycombs with spatial irregularity. Mechanics of Materials, 95, pp. 204-222. (doi: 10.1016/j.mechmat.2016.01.009)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Adhikari, S. (2016) Fuzzy uncertainty propagation in composites using Gram-Schmidt polynomial chaos expansion. Applied Mathematical Modelling, 40, pp. 4412-4428. (doi: 10.1016/j.apm.2015.11.038)

Syta, A., Litak, G., Friswell, M. I., Adhikari, S. (2016) Multiple solutions and corresponding power output of a nonlinear bistable piezoelectric energy harvester. European Physical Journal B, 89, (doi: 10.1140/epjb/e2016-60699-0)

Chandrashaker, A., Adhikari, S., Friswell, M. I. (2016) Quantification of vibration localization in periodic structures. Journal of Vibration and Acoustics, 138, (doi: 10.1115/1.4032032)

Adhikari, S., Pascual, B. (2016) The 'damping effect' in the dynamic response of stochastic oscillators. Probabilistic Engineering Mechanics, 44, pp. 2-17. (doi: 10.1016/j.probengmech.2015.09.017)

Zhang, J., Wang, C., Adhikari, S. (2016) Reply to Comment on 'Molecular structure-dependent deformations in boron nitride nanostructures subject to an electrical field' Journal of Physics D: Applied Physics, 49, (doi: 10.1088/0022-3727/49/10/108002)

Mahata, A., Mukhopadhyay, T., Adhikari, S. (2016) A polynomial chaos expansion based molecular dynamics study for probabilistic strength analysis of nano-twinned copper. Materials Research Express, 3, (doi: 10.1088/2053-1591/3/3/036501)

Dey, S., Mukhopadhyay, T., Spickenheuer, A., Gohs, U., Adhikari, S. (2016) Uncertainty quantification in natural frequency of composite plates - an artificial neural network based approach. Advanced Composites Letters, 25, pp. 43-48. (doi: 10.1177/096369351602500203)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Adhikari, S. (2016) A response surface modelling approach for resonance driven reliability based optimization of composite shells. Periodica Polytechnica Civil Engineering, 60, pp. 103-111. (doi: 10.3311/PPci.8073)

Malaji, P.V., Ali, S.F., Adhikari, S., Friswell, M.I. (2016) Analysis of harvesting energy from mistuned multiple harvesters with and without coupling. Procedia Engineering, 144, pp. 621-628. (doi: 10.1016/j.proeng.2016.05.052)

Porter, S. J., Bradley, F. (2016) Architectural design principles for extra-terrestrial habitats. Acta Futura, 10, pp. 23-35.

Jacquelin, E., Friswell, M.I., Adhikari, S., Dessombz, O., Sinou, J.-J. (2016) Polynomial Chaos Expansion With Fuzzy and Random Uncertainties in Dynamical Systems.

Martinez-Ayuso, G., Friswell, M.I., Adhikari, S., Haddad Khodaparast, H., Featherston, C.A. (2016) Porous Piezoelectric Materials for Energy Harvesting.