Glasgow Computational Engineering Centre (GCEC)

Ramses, R., Kennedy, S., Good, R., Oldroyd, K. G., Mcginty, S. (2024) Performance of drug-coated balloons in coronary and below-the-knee arteries: anatomical, physiological and pathological considerations. Vascular Pharmacology, 155, (doi: 10.1016/j.vph.2024.107366)

Di Giusto, T. B.J., Lee, C. H., Gil, A.J., Bonet, J., Giacomini, M. (2024) A first-order hyperbolic arbitrary Lagrangian Eulerian conservation formulation for non-linear solid dynamics. International Journal for Numerical Methods in Engineering, (doi: 10.1002/nme.7467)

Liu, Y., Nguyen, L. T. K., Li, X., Feeney, A. (2024) A Timoshenko-Ehrenfest beam model for simulating Langevin transducer dynamics. Applied Mathematical Modelling,

Hong, Y., Wang, X., Wang, L., Kang, G., Gao, Z. (2024) High-cycle shakedown, ratcheting and liquefaction behavior of anisotropic granular material with fabric evolution: experiments and constitutive modelling. Journal of the Mechanics and Physics of Solids, (doi: 10.1016/j.jmps.2024.105638)

Sénéchal, F., Robinson, S., Van Schaik, E., Trévisan, M., Saxena, P., Reinhardt, D., Fankhauser, C. (2024) Pectin methylesterification modulates cell wall properties to promote neighbour proximity-induced hypocotyl growth. Plant Direct, 8, (doi: 10.1002/pld3.584)

El Khatib, O., Kumar, S., Cantwell, W. J., Schiffer, A. (2024) Effective elastic properties of sandwich-structured hierarchical honeycombs: an analytical solution. International Journal of Mechanical Sciences, 265, (doi: 10.1016/j.ijmecsci.2023.108883)

Ross, C. J., Laurence, D. W., Aggarwal, A., Hsu, M.-C., Mir, A., Burkhart, H. M., Lee, C.-H. (2024) Bayesian optimization-based inverse Finite Element Analysis for atrioventricular heart valves. Annals of Biomedical Engineering, 56, pp. 611-626. (doi: 10.1007/s10439-023-03408-6)

Chowdhury, S., Banerjee, A., Adhikari, S. (2024) The nonlinear negative stiffness inertial amplifier base isolators for dynamic systems. Mechanics Based Design of Structures and Machines, (doi: 10.1080/15397734.2024.2319113)

Ahmadi, M., Saxena, P. (2024) Analytical modelling of the electrical conductivity of CNT-filled polymer nanocomposites. Mathematics and Mechanics of Solids, (doi: 10.1177/10812865231225483)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2024) Thermally enhanced nanocomposite phase change material slurry for solar-thermal energy storage. Journal of Energy Storage, 78, (doi: 10.1016/j.est.2023.110110)

Schneider, J., Basak, S., Hou, Y., Koo, J. H., Wardle, B. L., Gadegaard, N., Kumar, S. (2024) 3D printed polyetheretherketone smart polymer nanocomposite scaffolds: mechanical, self-sensing, and biological attributes. Advanced Engineering Materials, (doi: 10.1002/adem.202301659)

Li, X., Gao, Z. (2024) Evaluation of three weight functions for nonlocal regularisation of sand models. International Journal of Geomechanics,

Wagih, M., Shi, J., Li, M., Komolafe, A., Whittaker, T., Schneider, J., Kumar, S., Whittow, W., Beeby, S. (2024) Wide-range soft anisotropic thermistor with a direct wireless radio frequency interface. Nature Communications, 15, (doi: 10.1038/s41467-024-44735-z)

Liu, Z., Bian, P.-L., Qu, Y., Huang, W., Chen, L., Chen, J., Saxena, P., Yu, T. (2024) A Galerkin approach for analysing coupling effects in the piezoelectric semiconducting beams. European Journal of Mechanics - A/Solids, 103, (doi: 10.1016/j.euromechsol.2023.105145)

Lockington, D., Brown, G., Pearce, C., Kaczmarczyk, L. (2024) Evaluating the forces involved in bubble management in DMEK surgery – a mathematical and computational model with clinical implications. Journal of Cataract and Refractive Surgery, 50, pp. 78-83. (doi: 10.1097/j.jcrs.0000000000001309)

Lu, D., Meng, F., Zhou, X., Zhuo, Y., Gao, Z., Du, X. (2023) A dynamic elastoplastic model of concrete based on a modeling method with environmental factors as constitutive variables. Journal of Engineering Mechanics, 149, (doi: 10.1061/JENMDT.EMENG-7206)

Sun, F., Febrianto, E., Fernando, H., Butler, L. J., Cirak, F., Hoult, N. A. (2023) Data-informed statistical finite element analysis of rail buckling. Computers and Structures, 289, (doi: 10.1016/j.compstruc.2023.107163)

Khayyer, A., Shimizu, Y., Lee, C. H., Gil, A., Gotoh, H., Bonet, J. (2023) An improved updated Lagrangian SPH method for structural modelling. Computational Particle Mechanics, (doi: 10.1007/s40571-023-00673-z)

Lee, C. H., Refachinho de Campos, P. R., Gil, A. J., Giacomini, M., Bonet, J. (2023) An entropy-stable updated reference Lagrangian smoothed particle hydrodynamics algorithm for thermo-elasticity and thermo-visco-plasticity. Computational Particle Mechanics, 10, pp. 1493-1531. (doi: 10.1007/s40571-023-00564-3)

Corti, A., McQueen, A., Migliavacca, F., Chiastra, C., McGinty, S. (2023) Investigating the effect of drug release on in-stent restenosis: a hybrid continuum – agent-based modelling approach. Computer Methods and Programs in Biomedicine, 241, (doi: 10.1016/j.cmpb.2023.107739)

Kazaz, O., Ferraro, R., Tassieri, M., Kumar, S., Falcone, G., Karimi, N., Paul, M. C. (2023) Sensible heat thermal energy storage performance of mono and blended nanofluids in a free convective-radiation inclined system. Case Studies in Thermal Engineering, 51, (doi: 10.1016/j.csite.2023.103562)

Wang, H., Tian, L., Zhao, X., Ali, M., Feng, H., Han, S., Xing, Z., Kumar, S., Ding, J. (2023) Synthesis of MoS2/CoS composite electrode and its application for supercapacitors. Journal of Alloys and Compounds, 960, (doi: 10.1016/j.jallcom.2023.170835)

Mirani, H., Gupta, V., Adhikari, S., Bhattacharya, B. (2023) Tailoring of interface modes in topologically protected edge states with hourglass lattice metamaterials. Journal of Sound and Vibration, 562, (doi: 10.1016/j.jsv.2023.117814)

Hamed, M.M.O., McBride, A. T., Reddy, B.D. (2023) An ALE approach for large-deformation thermoplasticity with application to friction welding. Computational Mechanics, 72, pp. 803-826. (doi: 10.1007/s00466-023-02303-0)

Steinmann, P., de Villiers, A. M., McBride, A. T., Javili, A. (2023) Configurational peridynamics. Mechanics of Materials, 185, (doi: 10.1016/j.mechmat.2023.104751)

Azam, M. U., Schiffer, A., Kumar, S. (2023) Mechanical and piezoresistive behavior of selectively laser sintered MWCNT/UHMWPE nanocomposites. Composites Part A: Applied Science and Manufacturing, 173, (doi: 10.1016/j.compositesa.2023.107701)

Schneider, J., Kumar, S. (2023) Comparative performance evaluation of microarchitected lattices processed via SLS, MJ, and DLP 3D printing methods: experimental investigation and modelling. Journal of Materials Research and Technology, 26, pp. 7182-7198. (doi: 10.1016/j.jmrt.2023.09.061)

Athanasiadis, I., Shvarts, A. G., Ullah, Z., Lewandowski, K., Pearce, C. J., Kaczmarczyk, L. (2023) A computational framework for crack propagation along contact interfaces and surfaces under load. Computer Methods in Applied Mechanics and Engineering, 414, (doi: 10.1016/j.cma.2023.116129)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2023) Heat transfer characteristics of fluids containing paraffin core-metallic shell nanoencapsulated phase change materials for advanced thermal energy conversion and storage applications. Journal of Molecular Liquids, 385, (doi: 10.1016/j.molliq.2023.122385)

Lewandowski, K., Barbera, D., Blackwell, P., Roohi, A. H., Athanasiadis, I., McBride, A., Steinmann, P., Pearce, C., Kaczmarczyk, Ł. (2023) Multifield finite strain plasticity: theory and numerics. Computer Methods in Applied Mechanics and Engineering, 414, (doi: 10.1016/j.cma.2023.116101)

Cai, H., Gao, Z., Hong, Y., Zhang, J. (2023) A bounding surface model for gassy clay. Computers and Geotechnics, 161, (doi: 10.1016/j.compgeo.2023.105565)

Liu, S., Gao, Z., Li, M. (2023) Effect of strength anisotropy on strain localization in natural clay. Acta Geotechnica, 18, pp. 4615-4632. (doi: 10.1007/s11440-023-01853-0)

Pontrelli, G., Bretti, G., McGinty, S. (2023) Modelling smart drug release with functionally graded materials. Computers in Biology and Medicine, 164, (doi: 10.1016/j.compbiomed.2023.107294)

Azam, M. U., Schiffer, A., Kumar, S. (2023) Piezoresistive behavior of MWCNT/PA12 honeycomb composites processed via selective laser sintering. Journal of Materials Research and Technology, 26, pp. 2319-2332. (doi: 10.1016/j.jmrt.2023.08.051)

Yuan, P., Adhikari, S., Dong, Y. (2023) A partitioned combined computational method for multi‐scale dynamic systems. International Journal for Numerical Methods in Engineering, 124, pp. 3494-3523. (doi: 10.1002/nme.7256)

Quick, L., Creed, M. J., Sinclair, H. D., Attal, M., Borthwick, A. G. L., Sinha, R. (2023) Hyperconcentrated floods cause extreme gravel transport through the sandy rivers of the Gangetic Plains. Communications Earth and Environment, 4, (doi: 10.1038/s43247-023-00953-9)

Fateixa, S., Landauer, M., Schneider, J., Kumar, S., Böhm, R. (2023) Additive manufacturing-enabled architected nanocomposite lattices coated with plasmonic nanoparticles for water pollutants detection. Macromolecular Materials and Engineering, 308, (doi: 10.1002/mame.202300060)

Jain, A., King, D., Pontrelli, G., Mcginty, S. (2023) Controlling release from encapsulated drug-loaded devices: insights from modeling the dissolution front propagation. Journal of Controlled Release, 360, pp. 225-235. (doi: 10.1016/j.jconrel.2023.06.019)

Liu, Z., McBride, A., Ghosh, A., Heltai, L., Huang, W., Yu, T., Steinmann, P., Saxena, P. (2023) Computational instability analysis of inflated hyperelastic thin shells using subdivision surfaces. Computational Mechanics, (doi: 10.1007/s00466-023-02366-z)

Saadi, O. W., Uddin, M. A., Schiffer, A., Kumar, S. (2023) Digital light processing of 2D lattice composites for tunable self-sensing and mechanical performance. Advanced Engineering Materials, (doi: 10.1002/adem.202300473)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2023) Investigation of Nanoparticle Effect in Phase Change Material Balls for Solar Energy Conversion and Storage Systems.

Chelot, D., Tewari, A., Kumar, S., Upadhyaya, P. (2023) Enhanced strength and toughness of repurposed glass fiber reinforced adhesive joints for sewage applications. Journal of Adhesion, (doi: 10.1080/00218464.2023.2234292)

Smith, M. G., Radford, J., Febrianto, E., Ramírez, J., O'Mahony, H., Matheson, A. B., Gibson, G. M., Faccio, D., Tassieri, M. (2023) Machine learning opens a doorway for microrheology with optical tweezers in living systems. AIP Advances, 13, (doi: 10.1063/5.0161014)

Patro, S. R., Banerjee, A., Adhikari, S., Ramana, G. V. (2023) Kaimal spectrum based H2 optimization of tuned mass dampers for wind turbines. Journal of Vibration and Control, 29, pp. 3175-3185. (doi: 10.1177/10775463221092838)

Aggarwal, A., Mortensen, P., Hao, J., Kaczmarczyk, Ł., Cheung, A. T., Al Ghofaily, L., Gorman, R. C., Desai, N. D., Bavaria, J. E., Pouch, A. M. (2023) Strain estimation in aortic roots from 4D echocardiographic images using medial modeling and deformable registration. Medical Image Analysis, 87, (doi: 10.1016/j.media.2023.102804)

Athanasiadis, I., Shvarts, A., Fotouhi, S., Kaczmarczyk, L., Cochran, S., Pearce, C. (2023) A Finite Element Model Updating Approach for the Characterisation of Piezoelectric Materials.

Titlbach, A., Papastavrou, A., McBride, A., Steinmann, P. (2023) A novel micromorphic approach captures non-locality in continuum bone remodelling. Computer Methods in Biomechanics and Biomedical Engineering, (doi: 10.1080/10255842.2023.2223331)

Manoj, I., Kumar, S., Jain, A. (2023) A numerical study on stress mitigation in through-thickness tailored bi-adhesive single-lap joints. Journal of Adhesion Science and Technology, (doi: 10.1080/01694243.2023.2217674)

Verma, P., Ubaid, J., Alam, F., Deveci, S., Kumar, S. (2023) Multifunctional characteristics of 3D printed polymer nanocomposites under monotonic and cyclic compression. Defence Technology, (doi: 10.1016/j.dt.2023.05.017)

Al-Budairi, H., Gao, Z., Steel, A. (2023) Numerical modelling of double-twisted wire mesh for low-energy rockfall catch fences. Geosciences, 13, (doi: 10.3390/geosciences13060180)

Gao, Z., Whyte, S. (2023) Finite Element Modelling of Long-term Cyclic Response of Monopiles in Sand Using a Stiffness Degradation Approach.

Cai, H., Gao, Z., Hong, Y., Zhang, J., Lu, D. (2023) Constitutive Modelling of Overconsolidated Gassy Clay.

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2023) Effects of combined radiation and forced convection on a directly capturing solar energy system. Thermal Science and Engineering Progress, 40, (doi: 10.1016/j.tsep.2023.101797)

Yao, H., Zhao, S., Gao, Z., Xue, Z., Song, B., Li, F., Li, J., Liu, Y., Hou, Y., Wang, L. (2023) Data-driven analysis on the subbase strain prediction: a deep data augmentation-based study. Transportation Geotechnics, 40, (doi: 10.1016/j.trgeo.2023.100957)

Choudhry, N. K., Panda, B., Kumar, S. (2023) Enhanced energy absorption performance of 3D printed 2D auxetic lattices. Thin-Walled Structures, 186, (doi: 10.1016/j.tws.2023.110650)

Saadi, O. W., Schiffer, A., Kumar, S. (2023) Piezoresistive behavior of DLP 3D printed CNT/polymer nanocomposites under monotonic and cyclic loading. International Journal of Advanced Manufacturing Technology, 126, pp. 1965-1978. (doi: 10.1007/s00170-023-11123-8)

Kumar, S., Khan, M.A., Wardle, B. L., Reddy, J.N. (2023) Pullout characteristics of functionally graded and degraded adhesive anchors. European Journal of Mechanics - A/Solids, 99, (doi: 10.1016/j.euromechsol.2023.104950)

Roy, A., Chakraborty, S., Adhikari, S. (2023) Reliability analysis of structures by active learning enhanced sparse Bayesian regression. Journal of Engineering Mechanics, 149, (doi: 10.1061/jenmdt.emeng-6964)

Lu, D., Zhang, Y., Zhou, X., Su, C., Gao, Z., Du, X. (2023) A robust stress update algorithm for elastoplastic models without analytical derivation of the consistent tangent operator and loading/unloading estimation. International Journal for Numerical and Analytical Methods in Geomechanics, 47, pp. 1022-1050. (doi: 10.1002/nag.3503)

Athanasiadis, I., Shvarts, A., Fotouhi, S., Kaczmarczyk, L., Cochran, S., Pearce, C. (2023) Piezoelectric Material Characterisation Using the Finite Element Model Updating Method.

Mehnert, M., Oates, W., Steinmann, P. (2023) Numerical modeling of nonlinear photoelasticity. International Journal for Numerical Methods in Engineering, 124, pp. 1602-1619. (doi: 10.1002/nme.7177)

Kainz, M. P., Greiner, A., Hinrichsen, J., Kolb, D., Comellas, E., Steinmann, P., Budday, S., Terzano, M., Holzapfel, G. A. (2023) Poro-viscoelastic material parameter identification of brain tissue-mimicking hydrogels. Frontiers in Bioengineering and Biotechnology, 11, (doi: 10.3389/fbioe.2023.1143304)

Essayah, A., Gao, Z., Shire, T., Guo, N. (2023) Discrete Element Modelling of Energy Dissipation and Stored Plastic Work in Granular Materials.

Lu, D., Dong, H., Lin, Q., Gui, C., Gao, Z., Du, X. (2023) A method for characterizing the deformation localization in granular materials using the relative particle motion. Computers and Geotechnics, 156, (doi: 10.1016/j.compgeo.2023.105262)

Gao, Z., Lu, D., Hou, Y., Li, X. (2023) Constitutive modelling of fabric effect on sand liquefaction. Journal of Rock Mechanics and Geotechnical Engineering, 15, pp. 926-936. (doi: 10.1016/j.jrmge.2022.06.002)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) Optimal design of inertial amplifier base isolators for dynamic response control of multi-storey buildings. International Journal of Structural Stability and Dynamics, 23, (doi: 10.1142/s0219455423500475)

Li, X., Gao, Z. (2023) Evaluation of Nonlocal Regularisation Methods for Sand Models.

Logakannan, K. P., Ruan, D., Rengaswamy, J., Kumar, S., Ramachandran, V. (2023) Fracture locus of additively manufactured AlSi10Mg alloy. Thin-Walled Structures, 184, (doi: 10.1016/j.tws.2022.110460)

Hyndman, L., McKee, S., McGinty, S. (2023) Solute transport with Michaelis-Menten kinetics for in vitro cell culture. Mathematical Medicine and Biology, 40, pp. 49-72. (doi: 10.1093/imammb/dqac014)

Chowdhury, S., Banerjee, A., Adhikari, S. (2023) The optimum inertial amplifier tuned mass dampers for nonlinear dynamic systems. International Journal of Applied Mechanics, 15, (doi: 10.1142/s1758825123500096)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2023) Enhanced sensible heat storage capacity of nanofluids by improving the photothermal conversion performance with direct radiative absorption of solar energy. Journal of Molecular Liquids, 372, (doi: 10.1016/j.molliq.2022.121182)

Khan, M.A., Tipireddy, R., Dattaguru, B., Kumar, S. (2023) Stochastic modeling of functionally graded double-lap adhesive joints. Mechanics of Materials, 177, (doi: 10.1016/j.mechmat.2022.104553)

Grassl, P. (2023) 3D lattice meso-scale modelling of the effect of lateral compression on tensile fracture processes in concrete. International Journal of Solids and Structures, 262-63, (doi: 10.1016/j.ijsolstr.2022.112086)

Cremen, G., Galasso, C., McCloskey, J., Barcena, A., Creed, M., Filippi, M. E., Gentile, R., Jenkins, L., Kalaycioglu, M., Mentese, E. Y., Muthusamy, M., Tarbali, K., Trogrlic, R. S. (2023) A state-of-the-art decision-support environment for risk-sensitive and pro-poor urban planning and design in Tomorrow's cities. International Journal of Disaster Risk Reduction, 85, (doi: 10.1016/j.ijdrr.2022.103400)

Evangelina Filippi, M., Barcena, A., Šakić Trogrlić, R., Cremen, G., Menteşe, E. Y., Gentile, R., Creed, M. J., Jenkins, L. T., Kalaycioglu, M., Poudel, D. P., Muthusamy, M., Manandhar, V., Adhikari, S., Rai, M., Dhakal, A., Barake, B., Tarbali, K., Galasso, C., McCloskey, J. (2023) Interdisciplinarity in practice: reflections from early-career researchers developing a risk-informed decision support environment for Tomorrow's cities. International Journal of Disaster Risk Reduction, 85, (doi: 10.1016/j.ijdrr.2022.103481)

Aggarwal, A., Jensen, B. S., Pant, S., Lee, C.-H. (2023) Strain energy density as a Gaussian process and its utilization in stochastic finite element analysis: application to planar soft tissues. Computer Methods in Applied Mechanics and Engineering, 404, (doi: 10.1016/j.cma.2022.115812)

Aggarwal, A., Hudson, L. T., Laurence, D. W., Lee, C.-H., Pant, S. (2023) A Bayesian constitutive model selection framework for biaxial mechanical testing of planar soft tissues: application to porcine aortic valves. Journal of the Mechanical Behavior of Biomedical Materials, 138, (doi: 10.1016/j.jmbbm.2023.105657)

Liu, Z., Pan, S., Gao, Z., Chen, N., Li, F., Wang, L., Hou, Y. (2023) Automatic intelligent recognition of pavement distresses with limited dataset using generative adversarial networks. Automation in Construction, 146, (doi: 10.1016/j.autcon.2022.104674)

Gao, Z., Yan, L., Whyte, S. (2023) B-SDM: a bounding surface stiffness degradation method for modelling the long-term ratcheting response of offshore wind turbine foundations. Computers and Geotechnics, 154, (doi: 10.1016/j.compgeo.2022.105157)

Huang, W., Ni, Y., Creed, M., Yu, S. (2023) Experimental analysis of 3D flow structures around a floating dike. Water, 15, (doi: 10.3390/w15040703)

Azam, M. U., Schiffer, A., Kumar, S. (2023) Mechanical and piezoresistive properties of GNP/UHMWPE composites and their cellular structures manufactured via selective laser sintering. Journal of Materials Research and Technology, 28, pp. 1359-1369. (doi: 10.1016/j.jmrt.2023.12.089)

Nguyen, L. T. K., Smyth, N. F. (2023) Modulation theory for radially symmetric kink waves governed by a multi-dimensional sine-Gordon equation. Journal of Nonlinear Science, 33, (doi: 10.1007/s00332-022-09859-w)

Bhattacharyya, A., Adhikari, S. (2023) Propagation characteristics of an elastic bar coupled with a discrete snap-through element. Nonlinear Dynamics, 111, pp. 2961-2990. (doi: 10.1007/s11071-022-08028-8)

Gong, L., Passari, A. K., Yin, C., Kumar Thakur, V., Newbold, J., Clark, W., Jiang, Y., Kumar, S., Gupta, V. K. (2023) Sustainable utilization of fruit and vegetable waste bioresources for bioplastics production. Critical Reviews in Biotechnology, (doi: 10.1080/07388551.2022.2157241)

Salvi, S., Jain, A., Pontrelli, G., McGinty, S. (2023) Modeling dual drug delivery from eluting stents: the influence of non-linear binding competition and non-uniform drug loading. Pharmaceutical Research, 40, pp. 215-230. (doi: 10.1007/s11095-022-03419-3)

Hamilton, A., Xu, Y., Kartal, M. E., Kumar, S., Gadegaard, N., Mulvihill, D. M. (2023) Optimisation of interlocking microstructured adhesive joints via finite element modelling, design of experiments and 3D printing. International Journal of Adhesion and Adhesives, 120, (doi: 10.1016/j.ijadhadh.2022.103292)

Jenkins, L., Creed, M. J., Tarbali, K., Muthusamy, M., Šakić Trogrlić, R., Phillips, J., Scott Watson, C., Sinclair, H. D., Galasso, C., McCloskey, J. (2023) Physics-based simulations of multiple natural hazards for risk-sensitive planning and decision making in expanding urban regions. International Journal of Disaster Risk Reduction, 84, (doi: 10.1016/j.ijdrr.2022.103338)

Wedel, J., Steinmann, P., Štrakl, M., Hriberšek, M., Ravnik, J. (2023) Shape matters: Lagrangian tracking of complex nonspherical microparticles in superellipsoidal approximation. International Journal of Multiphase Flow, 158, (doi: 10.1016/j.ijmultiphaseflow.2022.104283)

Gao, Z. W., Li, X., Lu, D.C. (2023) Nonlocal Regularization of an Anisotropic Critical State Model for Sand. (doi: 10.53243/NUMGE2023-123)

Runcie, C. J., Lee, C. H., Haider, J., Gil, A. J., Bonet, J. (2022) An acoustic Riemann solver for large strain computational contact dynamics. International Journal for Numerical Methods in Engineering, 123, pp. 5700-5748. (doi: 10.1002/nme.7085)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. C. (2022) Effects of Nanofluid’s Base Fluid on a Volumetric Solar Collector. (doi: 10.1049/icp.2022.1627)

Fateixa, S., Schneider, J., Kumar, S., Böhm, R. (2022) 3D Printed Polymer Nanocomposites Engineered With Graphene and Metallic Nanoparticles for Optical Detection of Water Pollutants. (doi: 10.5075/epfl-298799_978-2-9701614-0-0)

Liu, S., Gao, Z., Li, M. (2022) A closed-form logarithmic spiral method for seismic passive earth pressure in anisotropic sand. Computers and Geotechnics, 152, (doi: 10.1016/j.compgeo.2022.105052)

Chandra, Y., Adhikari, S., Mukherjee, S., Mukhopadhyay, T. (2022) Unfolding the mechanical properties of buckypaper composites: nano- to macro-scale coupled atomistic-continuum simulations. Engineering with Computers, 38, pp. 5199-5229. (doi: 10.1007/s00366-021-01538-w)

Wedel, J., Steinmann, P., Štrakl, M., Hriberšek, M., Cui, Y., Ravnik, J. (2022) Anatomy matters: the role of the subject-specific respiratory tract on aerosol deposition — a CFD study. Computer Methods in Applied Mechanics and Engineering, 401, (doi: 10.1016/j.cma.2022.115372)

Liu, X., Huang, L., Adhikari, S. (2022) Equivalent in-plane dynamic elastic moduli of lattice structures with Plateau borders. Composite Structures, 299, (doi: 10.1016/j.compstruct.2022.116056)

Mehnert, M., Faber, J., Hossain, M., Chester, S. A., Steinmann, P. (2022) Experimental and numerical investigation of the electro-mechanical response of particle filled elastomers - Part I: Experimental investigations. European Journal of Mechanics - A/Solids, 96, (doi: 10.1016/j.euromechsol.2022.104651)

Mehnert, M., Faber, J., Hossain, M., Chester, S. A., Steinmann, P. (2022) Experimental and numerical investigations of the electro-mechanical response of particle filled elastomers - Part II: Continuum Modeling Approach. European Journal of Mechanics - A/Solids, 96, (doi: 10.1016/j.euromechsol.2022.104661)

Sharma, A., Donovan, K., Krishnamurthy, S., Creed, M. (2022) Exploring the scope of public participation for risk sensitive land use planning in Nepal: a policy review. Sustainability, 14, (doi: 10.3390/su142114137)

Essayah, A., Shire, T., Gao, Z. (2022) The relationship between contact network and energy dissipation in granular materials. Granular Matter, 24, (doi: 10.1007/s10035-022-01255-1)

Febrianto, E., Butler, L., Girolami, M., Cirak, F. (2022) Digital twinning of self-sensing structures using the statistical finite element method. Data-Centric Engineering, 3, (doi: 10.1017/dce.2022.28)

Khan, M. A., Wardle, B. L., Kumar, S. (2022) Elastic solutions for stresses in compliance-tailored adhesive anchors. International Journal of Adhesion and Adhesives, 118, (doi: 10.1016/j.ijadhadh.2022.103227)

Budarapu, P. R., Kumar, S., Khan, M. A., Rammohan, B., Anitescu, C. (2022) Engineered interphase mechanics in single lap joints: analytical and PINN formulations. International Journal of Computational Methods, 19, (doi: 10.1142/s0219876221430210)

Firooz, S., Kaessmair, S., Zaburdaev, V., Javili, A., Steinmann, P. (2022) On continuum modeling of cell aggregation phenomena. Journal of the Mechanics and Physics of Solids, 167, (doi: 10.1016/j.jmps.2022.105004)

Jain, A., Subbarao, K., McGinty, S., Pontrelli, G. (2022) Optimization of initial drug distribution in spherical capsules for personalized release. Pharmaceutical Research, 39, pp. 2607-2620. (doi: 10.1007/s11095-022-03359-y)

AlMahri, S., Schneider, J., Schiffer, A., Kumar, S. (2022) Piezoresistive sensing performance of multifunctional MWCNT/HDPE auxetic structures enabled by additive manufacturing. Polymer Testing, 114, (doi: 10.1016/j.polymertesting.2022.107687)

Liu, Z., McBride, A., Saxena, P., Heltai, L., Qu, Y., Steinmann, P. (2022) Vibration analysis of piezoelectric Kirchhoff-Love shells based on Catmull-Clark subdivision surfaces. International Journal for Numerical Methods in Engineering, 123, pp. 4296-4322. (doi: 10.1002/nme.7010)

Karimzadeh, A. A., Leung, A. K., Gao, Z. (2022) Shear strength anisotropy of rooted soils. Geotechnique, (doi: 10.1680/jgeot.22.00103)

Mehta, S., Raju, G., Saxena, P. (2022) Wrinkling as a mechanical instability in growing annular hyperelastic plates. International Journal of Mechanical Sciences, 229, (doi: 10.1016/j.ijmecsci.2022.107481)

Nguyen, L. T. K., Aydin, R. C., Cyron, C. J. (2022) Accelerating the distance-minimizing method for data-driven elasticity with adaptive hyperparameters. Computational Mechanics, 70, pp. 621-638. (doi: 10.1007/s00466-022-02183-w)

Liu, X., Liu, X., Adhikari, S., Zhao, X. (2022) An analytical framework for broadband dynamic analysis of plate built-up structures with uncertain viscoelastic boundary or connection conditions. Mechanical Systems and Signal Processing, 177, (doi: 10.1016/j.ymssp.2022.109121)

McQueen, A., Escuer, J., Schmidt, A. F., Aggarwal, A., Kennedy, S., McCormick, C., Oldroyd, K., Mcginty, S. (2022) An intricate interplay between stent drug dose and release rate dictates arterial restenosis. Journal of Controlled Release, 349, pp. 992-1008. (doi: 10.1016/j.jconrel.2022.07.037)

Stanisauskis, E., Mashayekhi, S., Pahari, B., Mehnert, M., Steinmann, P., Oates, W. (2022) Fractional and fractal order effects in soft elastomers: Strain rate and temperature dependent nonlinear mechanics. Mechanics of Materials, 172, (doi: 10.1016/j.mechmat.2022.104390)

Mehta, S., Raju, G., Kumar, S., Saxena, P. (2022) Instabilities in a compressible hyperelastic cylindrical channel under internal pressure and external constraints. International Journal of Non-Linear Mechanics, 144, (doi: 10.1016/j.ijnonlinmec.2022.104031)

de Klerk, D. N., Shire, T., Gao, Z., McBride, A. T., Pearce, C. J., Steinmann, P. (2022) A variational integrator for the discrete element method. Journal of Computational Physics, 462, (doi: 10.1016/j.jcp.2022.111253)

Wakeni, M. F., Aggarwal, A., Kaczmarczyk, Ł., McBride, A. T., Athanasiadis, I., Pearce, C. J., Steinmann, P. (2022) A p-adaptive, implicit-explicit mixed finite element method for diffusion-reaction problems. International Journal for Numerical Methods in Engineering, 123, pp. 3237-3263. (doi: 10.1002/nme.6967)

Paun, L. M., Schmidt, A. F., Mcginty, S., Husmeier, D. (2022) Statistical Inference for Optimisation of Drug Delivery from Stents. (doi: 10.11159/icsta22.138)

Kazaz, O., Karimi, N., Kumar, S., Falcone, G., Paul, M. (2022) Numerical Investigation of the Influences of Nanoparticle Size and Tilt Angle in a Directly Absorption Solar System.

Colombo, M., Corti, A., Mcginty, S., Migliavacca, F., Chiastra, C. (2022) Fluid dynamics and mass transport in lower limb vessels: effects on restenosis. Elsevier

Ubaid, J., Schneider, J., Deshpande, V. S., Wardle, B., Kumar, S. (2022) Multifunctionality of nanoengineered self-sensing lattices enabled by additive manufacturing. Advanced Engineering Materials, 24, (doi: 10.1002/adem.202200194)

Singh, S. K., Banerjee, A., Varma, R. K., Adhikari, S., Das, S. (2022) Static and dynamic analysis of homogeneous Micropolar-Cosserat panels. Mechanics of Advanced Materials and Structures, 29, pp. 2757-2768. (doi: 10.1080/15376494.2021.1877377)

Adhikari, S., Mukherjee, S. (2022) The exact element stiffness matrices of stochastically parametered beams. Probabilistic Engineering Mechanics, 69, (doi: 10.1016/j.probengmech.2022.103317)

Dixit, T., Al-Hajri, E., Paul, M. C., Nithiarasu, P., Kumar, S. (2022) High performance, microarchitected, compact heat exchanger enabled by 3D printing. Applied Thermal Engineering, 210, (doi: 10.1016/j.applthermaleng.2022.118339)

Gao, Z., Cai, H., Hong, Y., Lu, D. (2022) A constitutive model for gassy clay. Canadian Geotechnical Journal, 59, pp. 1033-1045. (doi: 10.1139/cgj-2020-0754)

Tsagkari, E., Connelly, S., Liu, Z., McBride, A., Sloan, W. T. (2022) The Role of Shear Dynamics in Biofilm Formation.

Escuer, J., Fensterseifer Schmidt, A., Peña, E., Martínez, M. A., McGinty, S. (2022) Mathematical modelling of endovascular drug delivery: balloons versus stents. International Journal of Pharmaceutics, 620, (doi: 10.1016/j.ijpharm.2022.121742)

Mihai, I. C., Bains, A., Grassl, P. (2022) Modelling of Cracking Mechanisms in Cementitious Materials: The Transition from Diffuse Microcracking to Localized Macrocracking. (doi: 10.1201/9781003316404-26)

Jain, A., McGinty, S., Pontrelli, G., Zhou, L. (2022) Theoretical modeling of endovascular drug delivery into a multilayer arterial wall from a drug-coated balloon. International Journal of Heat and Mass Transfer, 187, (doi: 10.1016/j.ijheatmasstransfer.2022.122572)

Barbera, D., Young, C., Charalambides, M., Taylor, A. C., Zhang, R. (2022) A methodology for the use of alkyd paint in thermally aged easel painting reconstructions for mechanical testing. Journal of Cultural Heritage, 55, pp. 237-244. (doi: 10.1016/j.culher.2022.03.003)

Liu, X., Lee, C.H., Grassl, P. (2022) On the Modelling of the Rate Dependence of Strength Using a Crack-band Based Damage Model for Concrete. CRC Press

Liu, L.-W., Lee, C.-H., Aggarwal, A., Chao, C.-M., Ross, C. J., Liao, Y.-K. (2022) Viscoelastic modelling of the tricuspid valve chordae tendineae tissue. Applied Mathematical Modelling, 105, pp. 648-669. (doi: 10.1016/j.apm.2021.12.028)

Tsagkari, E., Connelly, S., Liu, Z., McBride, A., Sloan, W. T. (2022) The role of shear dynamics in biofilm formation. npj Biofilms and Microbiomes, 8, (doi: 10.1038/s41522-022-00300-4)

Unnam, M., Velmurugan, R., Kumar, S. (2022) Mechanical, thermal and shape memory characterization of a novel epoxy shape memory polymer. Materials Science Forum, 1059, pp. 87-96. (doi: 10.4028/p-qwsuqs)

Aldellaa, I., Havlásek, P., Jirásek, M., Grassl, P. (2022) Effect of creep on corrosion-induced cracking. Engineering Fracture Mechanics, 264, (doi: 10.1016/j.engfracmech.2022.108310)

Povala, J., Kazlauskaite, I., Febrianto, E., Cirak, F., Girolami, M. (2022) Variational Bayesian approximation of inverse problems using sparse precision matrices. Computer Methods in Applied Mechanics and Engineering, 393, (doi: 10.1016/j.cma.2022.114712)

Andrew, J. J., Schneider, J., Schiffer, A., Hafeez, F., Kumar, S. (2022) Dynamic crushing of tailored honeycombs realized via additive manufacturing. International Journal of Mechanical Sciences, 219, (doi: 10.1016/j.ijmecsci.2022.107126)

Kazaz, O., Karimi, N., Kumar, S., Paul, M. C., Falcone, G. (2022) Effects of Combined Radiation and Forced Convection on a Directly Capturing Solar Energy System.

Adhikari, S., Banerjee, A. (2022) Enhanced low-frequency vibration energy harvesting with inertial amplifiers. Journal of Intelligent Material Systems and Structures, 33, pp. 822-838. (doi: 10.1177/1045389X211032281)

Jain, A., Mcginty, S., Pontrelli, G. (2022) Drug diffusion and release from a bioerodible spherical capsule. International Journal of Pharmaceutics, 616, (doi: 10.1016/j.ijpharm.2021.121442)

Liu, X., Lee, C. H., Grassl, P. (2022) On the modelling of spalling in plain concrete.

Zhou, C., Grassl, P. (2022) A damage-plasticity approach for modeling the failure of engineered cementitious composites.

Abdelrhim, G., Grassl, P. (2022) Modelling the failure of steel reinforced concrete frame structures.

Aldellaa, I., Grassl, P. (2022) On corrosion-induced cracking in reinforced concrete with different corrosion rates.

Ekop, I., Grassl, P. (2022) On finite element modelling of concrete columns with non-circular cross-sections confined with carbon fibre reinforced polymer.

de Campos, P. R. R., Gil, A. J., Lee, C. H., Giacomini, M., Bonet, J. (2022) A new Updated Reference Lagrangian Smooth Particle Hydrodynamics algorithm for isothermal elasticity and elasto-plasticity. Computer Methods in Applied Mechanics and Engineering, 392, (doi: 10.1016/j.cma.2022.114680)

Chen, N., Zhao, S., Gao, Z., Wang, D., Liu, P., Oeser, M., Hou, Y., Wang, L. (2022) Virtual mix design: prediction of compressive strength of concrete with industrial wastes using deep data augmentation. Construction and Building Materials, 323, (doi: 10.1016/j.conbuildmat.2022.126580)

Liu, X., Liu, X., Adhikari, S., Yin, S. (2022) Extended Wittrick–Williams algorithm for eigenvalue solution of stochastic dynamic stiffness method. Mechanical Systems and Signal Processing, 166, (doi: 10.1016/j.ymssp.2021.108354)

Štrakl, M., Hriberšek, M., Wedel, J., Steinmann, P., Ravnik, J. (2022) A model for translation and rotation resistance tensors for superellipsoidal particles in Stokes flow. Journal of Marine Science and Engineering, 10, (doi: 10.3390/jmse10030369)

Zhou, X., Lu, D., Su, C., Gao, Z., Du, X. (2022) An unconstrained stress updating algorithm with the line search method for elastoplastic soil models. Computers and Geotechnics, 143, (doi: 10.1016/j.compgeo.2021.104592)

Larsen, M. L., Arora, V., Adhikari, S., Clausen, H. B. (2022) Optimization of welded K-node in offshore jacket structure including the stochastic size effect. Marine Structures, 82, (doi: 10.1016/j.marstruc.2021.103128)

Triantafyllou, C., Pagan, D. C., McBride, A. (2022) Quantifying the effect of macrozones on the cold-dwell fatigue response of UD-Rolled Ti-6Al-4V using high-energy X-ray diffraction. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 834, (doi: 10.1016/j.msea.2021.142498)

Verma, P., Ubaid, J., Varadarajan, K. M., Wardle, B. L., Kumar, S. (2022) Synthesis and characterization of carbon nanotube-doped thermoplastic nanocomposites for the additive manufacturing of self-sensing piezoresistive materials. ACS Applied Materials and Interfaces, 14, pp. 8361-8372. (doi: 10.1021/acsami.1c20491)

Adhikari, S., Chakraborty, S. (2022) Random matrix eigenvalue problems in structural dynamics: An iterative approach. Mechanical Systems and Signal Processing, 164, (doi: 10.1016/j.ymssp.2021.108260)

Logakannan, K. P., Rengaswamy, J., Kumar, S., Ramachandran, V., Ruan, D. (2022) Mechanical response of a novel hybrid tube composed of an auxetic outer layer. Thin-Walled Structures, 171, (doi: 10.1016/j.tws.2021.108649)

Gao, Z., Li, X., Lu, D. (2022) Nonlocal regularization of an anisotropic critical state model for sand. Acta Geotechnica, 17, pp. 427-439. (doi: 10.1007/s11440-021-01236-3)

Jain, A., Mcginty, S., Pontrelli, G., Zhou, L. (2022) Theoretical model for diffusion-reaction based drug delivery from a multilayer spherical capsule. International Journal of Heat and Mass Transfer, 183, (doi: 10.1016/j.ijheatmasstransfer.2021.122072)

Mukherjee, S., Adhikari, S. (2022) The in-plane mechanics of a family of curved 2D lattices. Composite Structures, 280, (doi: 10.1016/j.compstruct.2021.114859)

Choudhry, N. K., Panda, B., Kumar, S. (2022) In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing. Composites Part B: Engineering, 228, (doi: 10.1016/j.compositesb.2021.109437)

Liang, J., Lu, D., Du, X., Ma, C., Gao, Z., Han, J. (2022) A 3D non-orthogonal elastoplastic constitutive model for transversely isotropic soil. Acta Geotechnica, 17, pp. 19-36. (doi: 10.1007/s11440-020-01095-4)

King, D., McCormick, C., McGinty, S. (2022) How does fluid flow influence drug release from drug filled implants? Pharmaceutical Research, 39, pp. 25-40. (doi: 10.1007/s11095-021-03127-4)

Wedel, J., Štrakl, M., Ravnik, J., Steinmann, P., Hriberšek, M. (2022) A specific slip length model for the Maxwell slip boundary conditions in the Navier–Stokes solution of flow around a microparticle in the no-slip and slip flow regimes. Theoretical and Computational Fluid Dynamics, 36, pp. 723-740. (doi: 10.1007/s00162-022-00627-w)

Singh, A., Mukhopadhyay, T., Adhikari, S., Bhattacharya, B. (2022) Extreme on-demand contactless modulation of elastic properties in magnetostrictive lattices. Smart Materials and Structures, 31, (doi: 10.1088/1361-665x/ac9cac)

Moreno-Mateos, M. A., Hossain, M., Steinmann, P., Garcia-Gonzalez, D. (2022) Hybrid magnetorheological elastomers enable versatile soft actuators. npj Computational Materials, 8, (doi: 10.1038/s41524-022-00844-1)

Mehnert, M., Hossain, M., Steinmann, P. (2021) A complete thermo-electro-viscoelastic characterization of dielectric elastomers, Part II: Continuum modeling approach. Journal of the Mechanics and Physics of Solids, 157, (doi: 10.1016/j.jmps.2021.104625)

Mehnert, M., Hossain, M., Steinmann, P. (2021) A complete thermo–electro–viscoelastic characterization of dielectric elastomers, Part I: Experimental investigations. Journal of the Mechanics and Physics of Solids, 157, (doi: 10.1016/j.jmps.2021.104603)

Lin, Q., Tian, Y., Lu, D., Gong, Q., Du, X., Gao, Z. (2021) A prediction method of ground volume loss variation with depth induced by tunnel excavation. Acta Geotechnica, 16, pp. 3689-3707. (doi: 10.1007/s11440-021-01295-6)

Pradhan, S. P., Saxena, P. (2021) Buckling of chiral rods due to coupled axial and rotational growth. Mathematics and Mechanics of Solids, 26, pp. 1675-1700. (doi: 10.1177/1081286521999704)

Povall, T.M., Govender, I., McBride, A.T. (2021) Dense granular flows in rotating drums: a computational investigation of constitutive equations. Powder Technology, 393, pp. 238-249. (doi: 10.1016/j.powtec.2021.07.051)

Gao, Z., Cai, H. (2021) Effect of total stress path and gas volume change on undrained shear strength of gassy clay. International Journal of Geomechanics, 21, (doi: 10.1061/(ASCE)GM.1943-5622.0002198)

Budarapu, P.R., Thakur, S., Kumar, S., Paggi, M. (2021) Micromechanics of engineered interphases in nacre-like composite structures. Mechanics of Advanced Materials and Structures, 28, pp. 2327-2342. (doi: 10.1080/15376494.2020.1733714)

Kavitha, T., Kumar, S. (2021) Multifunctionalities enabled by the synergistic effects of mesoporous carbon dots and ZnO nanorods. Materials Research Express, 8, (doi: 10.1088/2053-1591/abe36f)

Colombo, M., Corti, A., Berceli, S., Migliavacca, F., Mcginty, S., Chiastra, C. (2021) 3D modelling of drug-coated balloons for the treatment of calcified superficial femoral arteries. PLoS ONE, 16, (doi: 10.1371/journal.pone.0256783)

Andrew, J. J., Alhashmi, H., Schiffer, A., Kumar, S., Deshpande, V. S. (2021) Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites. Materials and Design, 208, (doi: 10.1016/j.matdes.2021.109863)

Pryse, S. E., Adhikari, S. (2021) Neumann enriched polynomial chaos approach for stochastic finite element problems. Probabilistic Engineering Mechanics, 66, (doi: 10.1016/j.probengmech.2021.103157)

Sharma, B. L., Saxena, P. (2021) Variational principles of nonlinear magnetoelastostatics and their correspondences. Mathematics and Mechanics of Solids, 26, pp. 1424-1454. (doi: 10.1177/1081286520975808)

Lakshminarayana, S., Adhikari, S., Maple, C. (2021) Analysis of IoT-based load altering attacks against power grids using the theory of second-order dynamical systems. IEEE Transactions on Smart Grid, 12, pp. 4415-4425. (doi: 10.1109/TSG.2021.3070313)

Alam, F., Verma, P., Mohammad, W., Teo, J., Varadarajan, K.M., Kumar, S. (2021) Architected poly(lactic acid)/poly(ε-caprolactone)/halloysite nanotube composite scaffolds enabled by 3D printing for biomedical applications. Journal of Materials Science, 56, pp. 14070-14083. (doi: 10.1007/s10853-021-06145-0)

Steinmann, P., Smith, A., Birang, E., McBride, A., Javili, A. (2021) Atomistic two-, three- and four-body potentials. Spatial and material settings. Journal of the Mechanics and Physics of Solids, 154, (doi: 10.1016/j.jmps.2021.104507)

Mehta, S., Raju, G., Saxena, P. (2021) Growth induced instabilities in a circular hyperelastic plate. International Journal of Solids and Structures, 226-27, (doi: 10.1016/j.ijsolstr.2021.03.013)

Coccarelli, A., Carson, J. M., Aggarwal, A., Pant, S. (2021) A framework for incorporating 3D hyperelastic vascular wall models in 1D blood flow simulations. Biomechanics and Modeling in Mechanobiology, 20, pp. 1231-1249. (doi: 10.1007/s10237-021-01437-5)

Patrick, J., Adhikari, S., Hussein, M. I. (2021) Brillouin-zone characterization of piezoelectric material intrinsic energy-harvesting availability. Smart Materials and Structures, 30, (doi: 10.1088/1361-665X/ac0c2c)

Lowa, K. W.Q., Lee, C. H., Gil, A. J., Haider, J., Bonet, J. (2021) A parameter-free Total Lagrangian Smooth Particle Hydrodynamics algorithm applied to problems with free surfaces. Computational Particle Mechanics, 8, pp. 859-892. (doi: 10.1007/s40571-020-00374-x)

Nguyen, L. T. K., Smyth, N. F. (2021) Dispersive shock waves for the Boussinesq Benjamin–Ono equation. Studies in Applied Mathematics, 147, pp. 32-59. (doi: 10.1111/sapm.12381)

Firooz, S., Steinmann, P., Javili, A. (2021) Homogenization of composites with extended general interfaces: comprehensive review and unified modeling. Applied Mechanics Reviews, 73, (doi: 10.1115/1.4051481)

Gao, Z., Zhao, J., Li, X. (2021) The deformation and failure of strip footings on anisotropic cohesionless sloping grounds. International Journal for Numerical and Analytical Methods in Geomechanics, 45, pp. 1526-1545. (doi: 10.1002/nag.3212)

Adhikari, S. (2021) The eigenbuckling analysis of hexagonal lattices: closed-form solutions. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 477, (doi: 10.1098/rspa.2021.0244)

Javili, A., McBride, A.T., Mergheim, J., Steinmann, P. (2021) Towards elasto-plastic continuum-kinematics-inspired peridynamics. Computer Methods in Applied Mechanics and Engineering, 380, (doi: 10.1016/j.cma.2021.113809)

Pearce, C., Lewandowski, K., Kaczmarczyk, Ł., Athanasiadis, I., Marshall, J. F. (2021) A computational framework for crack propagation in spatially heterogeneous materials. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 379, (doi: 10.1098/rsta.2020.0291)

Ghavamian, A., Lee, C. H., Gil, A. J., Bonet, J., Heuze, T., Stainier, L. (2021) An entropy-stable Smooth Particle Hydrodynamics algorithm for large strain thermo-elasticity. Computer Methods in Applied Mechanics and Engineering, 379, (doi: 10.1016/j.cma.2021.113736)

Shvarts, A. G., Vignollet, J., Yastrebov, V. A. (2021) Computational framework for monolithic coupling for thin fluid flow in contact interfaces. Computer Methods in Applied Mechanics and Engineering, 379, (doi: 10.1016/j.cma.2021.113738)

Gao, Z., Diambra, A. (2021) A multiaxial constitutive model for fibre-reinforced sand. Geotechnique, 71, pp. 548-560. (doi: 10.1680/jgeot.19.P.250)

Aggarwal, A., Lombardi, D., Pant, S. (2021) An information-theoretic framework for optimal design: analysis of protocols for estimating soft tissue parameters in biaxial experiments. Axioms, 10, (doi: 10.3390/axioms10020079)

Liu, Z., McBride, A., Sharma, B. L., Steinmann, P., Saxena, P. (2021) Coupled electro-elastic deformation and instabilities of a toroidal membrane. Journal of the Mechanics and Physics of Solids, 151, (doi: 10.1016/j.jmps.2020.104221)

Dwivedi, A., Banerjee, A., Adhikari, S., Bhattacharya, B. (2021) Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials. International Journal of Mechanics and Materials in Design, 17, pp. 419-439. (doi: 10.1007/s10999-021-09534-0)

McQueen, A., Escuer, J., Aggarwal, A., Kennedy, S., McCormick, C., Oldroyd, K., Mcginty, S. (2021) Do we really understand how drug eluted from stents modulates arterial healing? International Journal of Pharmaceutics, 601, (doi: 10.1016/j.ijpharm.2021.120575)

Gupta, V., Alam, F., Verma, P., Kannan, A.M., Kumar, S. (2021) Additive manufacturing enabled, microarchitected, hierarchically porous polylactic-acid/Lithium iron phosphate/carbon nanotube nanocomposite electrodes for high performance Li-Ion batteries. Journal of Power Sources, 494, (doi: 10.1016/j.jpowsour.2021.229625)

Gao, Z., Huang, M. (2021) Effect of sample preparation method on mechanical behaviour of fibre-reinforced sand. Computers and Geotechnics, 133, (doi: 10.1016/j.compgeo.2021.104007)

Jiang, N.-J., Hanson, J. L., Vecchia, G. D., Zhu, C., Yi, Y., Arnepalli, D. N., Courcelles, B., He, J., Horpibulsuk, S., Hoy, M., Takahashi, A., Arulrajah, A., Lin, C.-P., Dowoud, O., Li, Z., Gao, Z., Hata, T., Zhang, L., Du, Y.-J., Goli, V. S.N.S., Mohammad, A., Singh, P., Kuntikana, G., Singh, D. N. (2021) Geotechnical and geoenvironmental engineering education during the pandemic. Environmental Geotechnics, 8, pp. 233-243. (doi: 10.1680/jenge.20.00086)

Ghosh, A., Basu, S. (2021) Soft dielectric elastomer tubes in an electric field. Journal of the Mechanics and Physics of Solids, 150, (doi: 10.1016/j.jmps.2021.104371)

Saxena, P. (2021) Modelling instabilities in electroelastic and magnetoelastic membranes: a very brief review. arXiv,

Verma, P., Bansala, T., Chauhan, S. S., Kumar, D., Deveci, S., Kumar, S. (2021) Electromagnetic interference shielding performance of carbon nanostructure reinforced, 3D printed polymer composites. Journal of Materials Science, 56, pp. 11769-11788. (doi: 10.1007/s10853-021-05985-0)

Fu, Y., Gao, Z., Hong, Y., Li, T., Garg, A. (2021) Destructuration of saturated natural loess: from experiments to constitutive modelling. International Journal of Damage Mechanics, 30, pp. 575-594. (doi: 10.1177/1056789520939300)

Jefferson Andrew, J., Verma, P., Kumar, S. (2021) Impact behavior of nanoengineered, 3D printed plate-lattices. Materials and Design, 202, (doi: 10.1016/j.matdes.2021.109516)

Pontrelli, G., Toniolo, G., McGinty, S., Peri, D., Succi, S., Chatgilialoglu, C. (2021) Mathematical modelling of drug delivery from pH-responsive nanocontainers. Computers in Biology and Medicine, 131, (doi: 10.1016/j.compbiomed.2021.104238)

Girolami, M., Febrianto, E., Yin, G., Cirak, F. (2021) The statistical finite element method (statFEM) for coherent synthesis of observation data and model predictions. Computer Methods in Applied Mechanics and Engineering, 375, (doi: 10.1016/j.cma.2020.113533)

Andrew, J. J., Schneider, J., Ubaid, J., Velmurugan, R., Gupta, N.K., Kumar, S. (2021) Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading. International Journal of Impact Engineering, 149, (doi: 10.1016/j.ijimpeng.2020.103768)

Verma, P., Ubaid, J., Schiffer, A., Jain, A., Martínez-Pañeda, E., Kumar, S. (2021) Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing. International Journal of Advanced Manufacturing Technology, 113, pp. 771-784. (doi: 10.1007/s00170-020-06580-4)

Chatterjee, T., Karličić, D., Adhikari, S., Friswell, M. I. (2021) Gaussian process assisted stochastic dynamic analysis with applications to near-periodic structures. Mechanical Systems and Signal Processing, 149, (doi: 10.1016/j.ymssp.2020.107218)

Mayer Sihombing, M. A. E., Safitri, M., Zhou, T., Wang, L., McGinty, S., Qiu, J., Wang, G. (2021) Unexpected role of nonimmune cells: amateur phagocytes. DNA and Cell Biology, 40, pp. 157-171. (doi: 10.1089/dna.2020.5647)

Javili, A., McBride, A. T., Steinmann, P. (2021) A geometrically exact formulation of peridynamics. Theoretical and Applied Fracture Mechanics, 111, (doi: 10.1016/j.tafmec.2020.102850)

Bonet, J., Lee, C. H., Gil, A. J., Ghavamian, A. (2021) A first order hyperbolic framework for large strain computational solid dynamics. Part III: thermo-elasticity. Computer Methods in Applied Mechanics and Engineering, 373, (doi: 10.1016/j.cma.2020.113505)

Wang, Y., Zhang, K., Li, T., Maruf, A., Qin, X., Luo, L., Zhong, Y., Qiu, J., McGinty, S., Pontrelli, G., Liao, X., Wu, W., Wang, G. (2021) Macrophage membrane functionalized biomimetic nanoparticles for targeted anti-atherosclerosis applications. Theranostics, 11, pp. 164-180. (doi: 10.7150/thno.47841)

Febrianto, E., Ortiz, M., Cirak, F. (2021) Mollified finite element approximants of arbitrary order and smoothness. Computer Methods in Applied Mechanics and Engineering, 373, (doi: 10.1016/j.cma.2020.113513)

Hong, Y., Wang, X., Wang, L., Gao, Z. (2021) A state-dependent constitutive model for coarse-grained gassy soil and its application in slope instability modelling. Computers and Geotechnics, 129, (doi: 10.1016/j.compgeo.2020.103847)

Dixit, T., Nithiarasu, P., Kumar, S. (2021) Numerical evaluation of additively manufactured lattice architectures for heat sink applications. International Journal of Thermal Sciences, 159, (doi: 10.1016/j.ijthermalsci.2020.106607)

Verma, P., Schiffer, A., Kumar, S. (2021) Thermo-resistive and thermo-piezoresistive sensitivity of carbon nanostructure engineered thermoplastic composites processed via additive manufacturing. Polymer Testing, 93, (doi: 10.1016/j.polymertesting.2020.106961)

Kazaz, O., Karimi, N., Falcone, G., Kumar, S., Paul, M. C. (2021) Effect of Radiative Heat Transfer in Nanofluid for Volumetric Solar Collector. (doi: 10.46855/energy-proceedings-9360)

Zarzor, M. S., Kaessmair, S., Steinmann, P., Blümcke, I., Budday, S. (2021) Exploring the interplay between cellular development and mechanics in the developing human brain. PAMM: Proceedings in Applied Mathematics and Mechanics, 21, (doi: 10.1002/pamm.202100104)

Escuer, J., Aznar, I., McCormick, C., Peña, E., McGinty, S., Martínez, M. A. (2021) Influence of vessel curvature and plaque composition on drug transport in the arterial wall following drug-eluting stent implantation. Biomechanics and Modeling in Mechanobiology, 20, pp. 767-786. (doi: 10.1007/s10237-020-01415-3)

Karličić, D., Chatterjee, T., Cajić, M., Adhikari, S. (2020) Parametrically amplified Mathieu-Duffing nonlinear energy harvesters. Journal of Sound and Vibration, 488, (doi: 10.1016/j.jsv.2020.115677)

Karličić, D., Cajić, M., Paunović, S., Adhikari, S. (2020) Nonlinear energy harvester with coupled Duffing oscillators. Communications in Nonlinear Science and Numerical Simulation, 91, (doi: 10.1016/j.cnsns.2020.105394)

Minh Nguyen‐Thanh, V., Nguyen, L. T. K., Rabczuk, T., Zhuang, X. (2020) A surrogate model for computational homogenization of elastostatics at finite strain using high‐dimensional model representation‐based neural network. International Journal for Numerical Methods in Engineering, 121, pp. 4811-4842. (doi: 10.1002/nme.6493)

McBride, A., Davydov, D., Steinmann, P. (2020) Modelling the flexoelectric effect in solids: a micromorphic approach. Computer Methods in Applied Mechanics and Engineering, 371, (doi: 10.1016/j.cma.2020.113320)

Leppänen, J., Johansson, M., Grassl, P. (2020) On the dynamic response of reinforced concrete beams subjected to drop weight impact. Finite Elements in Analysis and Design, 180, (doi: 10.1016/j.finel.2020.103438)

Sciegaj, A., Grassl, P., Larsson, F., Runesson, K., Lundgren, K. (2020) Upscaling of three-dimensional reinforced concrete representative volume elements to effective beam and plate models. International Journal of Solids and Structures, 202, pp. 835-853. (doi: 10.1016/j.ijsolstr.2020.07.006)

Alam, F., Varadarajan, K. M., Koo, J. H., Wardle, B. L., Kumar, S. (2020) Additively manufactured polyetheretherketone (PEEK) with carbon nanostructure reinforcement for biomedical structural applications. Advanced Engineering Materials, 22, (doi: 10.1002/adem.202000483)

Liu, Z., McBride, A., Saxena, P., Steinmann, P. (2020) Assessment of an isogeometric approach with Catmull-Clark subdivision surfaces using the Laplace-Beltrami problems. Computational Mechanics, 66, pp. 851-876. (doi: 10.1007/s00466-020-01877-3)

Grieshaber, B. J., McBride, A. T., Reddy, B. D. (2020) Convergence in the incompressible limit of new discontinuous Galerkin methods with general quadrilateral and hexahedral elements. Computer Methods in Applied Mechanics and Engineering, 370, (doi: 10.1016/j.cma.2020.113233)

Dingle, E.H., Creed, M.J., Sinclair, H.D., Gautam, D., Gourmelen, N., Borthwick, A.G.L., Attal, M. (2020) Dynamic flood topographies in the Terai region of Nepal. Earth Surface Processes and Landforms, 45, pp. 3092-3102. (doi: 10.1002/esp.4953)

Gao, Z., Lu, D., Huang, M. (2020) Effective skeleton stress and void ratio for constitutive modelling of fiber-reinforced sand. Acta Geotechnica, 15, pp. 2797-2811. (doi: 10.1007/s11440-020-00986-w)

Javilia, A., Firooza, S., McBride, A.T., Steinmann, P. (2020) The computational framework for continuum-kinematics-inspired peridynamics. Computational Mechanics, 66, pp. 795-824. (doi: 10.1007/s00466-020-01885-3)

Saab, R., Polychronopoulou, K., Zheng, L., Kumar, S., Schiffer, A. (2020) Synthesis and performance evaluation of hydrocracking catalysts: a review. Journal of Industrial and Engineering Chemistry, 89, pp. 83-103. (doi: 10.1016/j.jiec.2020.06.022)

Malaji, P. V., Friswell, M. I., Adhikari, S., Litak, G. (2020) Enhancement of harvesting capability of coupled nonlinear energy harvesters through high energy orbits. AIP Advances, 10, (doi: 10.1063/5.0014426)

Gupta, V., Kannan, A.M., Kumar, S. (2020) Graphene Foam (GF)/Manganese Oxide (MnO2) nanocomposites for high performance supercapacitors. Journal of Energy Storage, 30, (doi: 10.1016/j.est.2020.101575)

Saxena, P., Sharma, B. L. (2020) On equilibrium equations and their perturbations using three different variational formulations of nonlinear electroelastostatics. Mathematics and Mechanics of Solids, 25, pp. 1589-1609. (doi: 10.1177/1081286520911073)

Ubaid, J., Wardle, B. L., Kumar, S. (2020) Bioinspired compliance grading motif of mortar in nacreous materials. ACS Applied Materials and Interfaces, 12, pp. 33256-33266. (doi: 10.1021/acsami.0c08181)

Gao, Z., Hong, Y., Wang, L. (2020) Constitutive modelling of fine‐grained gassy soil: a composite approach. International Journal for Numerical and Analytical Methods in Geomechanics, 44, pp. 1350-1368. (doi: 10.1002/nag.3065)

Nguyen, L. T. K., Rambausek, M., Keip, M.-A. (2020) Variational framework for distance-minimizing method in data-driven computational mechanics. Computer Methods in Applied Mechanics and Engineering, 365, (doi: 10.1016/j.cma.2020.112898)

Bhaskar, J., Kumar Sharma, A., Bhattacharya, B., Adhikari, S. (2020) A review on shape memory alloy reinforced polymer composite materials and structures. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab8836)

Schneider, J., Kumar, S. (2020) Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering. Polymer Testing, 86, (doi: 10.1016/j.polymertesting.2020.106357)

Gao, Z., Lu, D., Du, X. (2020) Bearing capacity and failure mechanism of strip footings on anisotropic sand. Journal of Engineering Mechanics, 146, (doi: 10.1061/(ASCE)EM.1943-7889.0001814)

Dingle, E. H., Sinclair, H. D., Venditti, J. G., Attal, M., Kinnaird, T. C., Creed, M., Quick, L., Nittrouer, J. A., Gautam, D. (2020) Sediment dynamics across gravel-sand transitions: implications for river stability and floodplain recycling. Geology, 48, pp. 468-472. (doi: 10.1130/g46909.1)

Hong, Y., Wang, L., Zhang, J., Gao, Z. (2020) 3D elastoplastic model for fine-grained gassy soil considering the gas-dependent yield surface shape and stress-dilatancy. Journal of Engineering Mechanics, 146, (doi: 10.1061/(asce)em.1943-7889.0001760)

Ullah, Z., Kaczmarczyk, Ł., Pearce, C.J. (2020) A three-dimensional hierarchic finite element-based computational framework for the analysis of composite laminates. Composite Structures, 293, (doi: 10.1016/j.compstruct.2020.111968)

Chandra, Y., Saavedra Flores, E.I., Adhikari, S. (2020) Buckling of 2D nano hetero-structures with moire patterns. Computational Materials Science, 177, (doi: 10.1016/j.commatsci.2019.109507)

Creed, M. J., Dingle, E. H., Sinclair, H. D., Gautam, D., Gourmelen, N., Borthwick, A. G. L., Attal, M. (2020) Numerical Modelling of Dynamic Flood Topographies in the Terai Region, Nepal. (doi: 10.5194/egusphere-egu2020-5533)

Dingle, E., Sinclair, H., Venditti, J., Attal, M., Kinnaird, T., Creed, M., Quick, L., Nittrouer, J., Gautam, D. (2020) Sediment Dynamics Across Gravel-Sand Transitions: Implications for River Stability and Floodplain Recycling. (doi: 10.5194/egusphere-egu2020-573)

Chandra, Y., Adhikari, S., Saavedra Flores, E.I., Figiel, L. (2020) Advances in finite element modelling of graphene and associated nanostructures. Materials Science and Engineering R: Reports, 140, (doi: 10.1016/j.mser.2020.100544)

Escuer, J., Cebollero, M., Peña, E., McGinty, S., Martınez, M. A. (2020) How does stent expansion alter drug transport properties of the arterial wall? Journal of the Mechanical Behavior of Biomedical Materials, 104, (doi: 10.1016/j.jmbbm.2019.103610)

Hyndman, L., McKee, S., Mottram, N. J., Singh, B., Webb, S. D., McGinty, S. (2020) Mathematical modelling of fluid flow and solute transport to define operating parameters for in vitro perfusion cell culture systems. Interface Focus, 10, (doi: 10.1098/rsfs.2019.0045)

Barbera, D., Haofeng, C. (2020) On the plastic strain accumulation in notched bars during high-temperature creep dwell. Journal of Mechanics, 36, pp. 167-176. (doi: 10.1017/jmech.2019.56)

Kumar, D., Sarangi, S., Saxena, P. (2020) Universal relations in coupled electro-magneto-elasticity. Mechanics of Materials, 143, (doi: 10.1016/j.mechmat.2019.103308)

Aggarwal, A., Pant, S. (2020) Beyond Newton: a new root-finding fixed-point iteration for nonlinear equations. Algorithms, 13, (doi: 10.3390/a13040078)

Arif, M.F., Alhashmi, H., Varadarajan, K.M., Koo, J. H., Hart, A.J., Kumar, S. (2020) Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing. Composites Part B: Engineering, 184, (doi: 10.1016/j.compositesb.2019.107625)

Alam, F., Shukla, V. R., Varadarajan, K.M., Kumar, S. (2020) Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 103, (doi: 10.1016/j.jmbbm.2019.103576)

Upadhyaya, P., Kumar, S., Reddy, J., Lacy Jr., T. E. (2020) Multiscale modeling of strength and failure behavior of carbon nanostructure reinforced epoxy composite adhesives in bonded systems. European Journal of Mechanics - A/Solids, 80, (doi: 10.1016/j.euromechsol.2019.103932)

Adhikari, S., Rastogi, A., Bhattacharya, B. (2020) Piezoelectric vortex induced vibration energy harvesting in a random flow field. Smart Materials and Structures, 29, (doi: 10.1088/1361-665X/ab519f)

Mora, A., Verma, P., Kumar, S. (2020) Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling. Composites Part B: Engineering, 183, (doi: 10.1016/j.compositesb.2019.107600)

Wan, Z., Yao, Y., Gao, Z. (2020) Comparison study of constitutive models for overconsolidated clays. Acta Mechanica Solida Sinica, 33, pp. 98-120. (doi: 10.1007/s10338-019-00110-w)

McQueen, A., Kennedy, S., McCormick, C., Aggarwal, A., McGinty, S. (2020) Mathematical Modelling of the Effect of Drug on Smooth Muscle Cell Proliferation.

Kaczmarczyk, Ł., Ullah, Z., Lewandowski, K., Meng, X., Zhou, X.-Y., Athanasiadis, I., Nguyen, H., Chalons-Mouriesse, C.-A., Richardson, E. J., Miur, E., Shvarts, A. G., Wakeni, M., Pearce, C. J. (2020) MoFEM: an open source, parallel finite element library. Journal of Open Source Software, 4, (doi: 10.21105/joss.01441)

Chandra, Y., Mukhopadhyay, T., Adhikari, S., Figiel, Ł. (2020) Size-dependent dynamic characteristics of graphene based multi-layer nano hetero-structures. Nanotechnology, 31, (doi: 10.1088/1361-6528/ab6231)

Alam, F., Varadarajan, K.M., Kumar, S. (2020) 3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications. Polymer Testing, 81, (doi: 10.1016/j.polymertesting.2019.106203)

Wang, Y., Lan, H., Yin, T., Zhang, X., Huang, J., Fu, H., Huang, J., McGinty, S., Gao, H., Wang, G., Wang, Z. (2020) Covalent immobilization of biomolecules on stent materials through mussel adhesive protein coating to form biofunctional films. Materials Science and Engineering C: Materials for Biological Applications, 106, (doi: 10.1016/j.msec.2019.110187)

Liao, Z., Hossain, M., Yao, X., Mehnert, M., Steinmann, P. (2020) On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer. International Journal of Non-Linear Mechanics, 118, (doi: 10.1016/j.ijnonlinmec.2019.103263)

Ganguli, R., Adhikari, S. (2020) The digital twin of discrete dynamic systems: Initial approaches and future challenges. Applied Mathematical Modelling, 77, pp. 1110-1128. (doi: 10.1016/j.apm.2019.09.036)

Jacquelin, E., Brizard, D., Adhikari, S., Friswell, M.I. (2020) Time-domain response of damped stochastic multiple-degree-of-freedom systems. Journal of Engineering Mechanics, 146, (doi: 10.1061/(ASCE)EM.1943-7889.0001705)

Yin, Y., Wang, J., Yang, M., Du, R., Pontrelli, G., McGinty, S., Wang, G., Yin, T., Wang, Y. (2020) Penetration of the blood-brain barrier and anti-tumor effect of a novel PLGA-lysoGM1/DOX micelles drug delivery system. Nanoscale, 12, pp. 2946-2960. (doi: 10.1039/C9NR08741A)

Adhikari, S., Bhattacharjee, B., Bhattacharjee, J. (2020) Preface. Lecture Notes in Civil Engineering, 38, pp. v-vi.

Zupan, R. J., Xu, J., Beblo, R. V., Clifford, D. T., Aggarwal, A., Brigham, J. C. (2019) Computational design optimization of a smart material shape changing building skin tile. Engineering Structures, 201, (doi: 10.1016/j.engstruct.2019.109839)

Venkata, S. P., Saxena, P. (2019) Instabilities in the free inflation of a nonlinear hyperelastic toroidal membrane. Journal of Mechanics of Materials and Structures, 14, pp. 473-496. (doi: 10.2140/jomms.2019.14.473)

Pivovarov, D., Oberleiter, T., Willner, K., Steinmann, P. (2019) Fuzzy-stochastic FEM-based homogenization framework for materials with polymorphic uncertainties in the microstructure. International Journal for Numerical Methods in Engineering, 116, pp. 633-660. (doi: 10.1002/nme.5947)

Blakemore, D. M., Govender, I., McBride, A. T., Mainza, A. N. (2019) Multiple particle tracking in PEPT using Voronoi tessellations. Chemical Engineering Science, 207, pp. 780-789. (doi: 10.1016/j.ces.2019.06.057)

Steinmann, P., Kergaßner, A., Landkammer, P., Zbib, H. M. (2019) A novel continuum approach to gradient plasticity based on the complementing concepts of dislocation and disequilibrium densities. Journal of the Mechanics and Physics of Solids, 132, (doi: 10.1016/j.jmps.2019.103680)

Williams, R., Barbera, D., Docherty, M., Bray, S., McBride, A. (2019) Computational modelling of inertia friction welding. Proceedings in Applied Mathematics and Mechanics, 19, (doi: 10.1002/pamm.201900500)

Saxena, P., Reddy, N. H., Pradhan, S. P. (2019) Magnetoelastic deformation of a circular membrane: wrinkling and limit point instabilities. International Journal of Non-Linear Mechanics, 116, pp. 250-261. (doi: 10.1016/j.ijnonlinmec.2019.07.006)

Aggarwal, A. (2019) Effect of residual and transformation choice on computational aspects of biomechanical parameter estimation of soft tissues. Bioengineering, 6, (doi: 10.3390/bioengineering6040100)

Liu, R., McGinty, S., Cui, F., Luo, X., Liu, Z. (2019) Modelling and simulation of the expansion of a shape memory polymer stent. Engineering Computations, 36, pp. 2726-2746. (doi: 10.1108/EC-10-2018-0462)

Kergassner, A., Mergheim, J., Steinmann, P. (2019) Modeling of additively manufactured materials using gradient-enhanced crystal plasticity. Computers and Mathematics with Applications, 78, pp. 2338-2350. (doi: 10.1016/j.camwa.2018.05.016)

Javili, A., McBride, A.T., Steinmann, P. (2019) Continuum-kinematics-inspired peridynamics. Mechanical problems. Journal of the Mechanics and Physics of Solids, 131, pp. 125-146. (doi: 10.1016/j.jmps.2019.06.016)

Kumar, S., Ubaid, J., Abishera, R., Schiffer, A., Deshpande, V.S. (2019) Tunable energy absorption characteristics of architected honeycombs enabled via additive manufacturing. ACS Applied Materials and Interfaces, 11, pp. 42549-42560. (doi: 10.1021/acsami.9b12880)

Liu, Z., McBride, A., Saxena, P., Steinmann, P. (2019) Solving the Laplace-Beltrami Equation on Curved Two-dimensional Manifolds using the Finite Element Method with Catmull-Clark Subdivision Surfaces.

Tsagkari, E., Connelly, S., Liu, Z., McBride, A., Sloan, W. T. (2019) A Novel Rapid Prototyping Tool for Suspended Biofilm Growth Media.

Grassl, P., Middlemiss, J. (2019) Finite Element Modelling of Tensile Reinforcement Laps in Steel Fibre Reinforced Concrete. (doi: 10.1201/9780429426506-110)

Martinez-Ayuso, G., Friswell, M.I., Haddad Khodaparast, H., Adhikari, S. (2019) Experimental validation of an impact off-resonance energy harvester. European Physical Journal: Special Topics, 228, pp. 1635-1646. (doi: 10.1140/epjst/e2019-800155-0)

Escuer, J., Martinez, M. A., McGinty, S., Pena, E. (2019) Mathematical modelling of the restenosis process after stent implantation. Journal of the Royal Society: Interface, 16, (doi: 10.1098/rsif.2019.0313)

O’Keeffe, A., Hyndman, L., McGinty, S., Riezk, A., Murdan, S., Croft, S. L. (2019) Development of an in vitro media perfusion model of Leishmania major macrophage infection. PLoS ONE, 14, (doi: 10.1371/journal.pone.0219985)

Tsagkari, E., Connelly, S., Liu, Z., McBride, A., Sloan, W.T. (2019) How the Design of Filter Media Affects Hydrodynamics and Biofilms in Drinking Water.

Escuer, J., Martinez, M. A., Mcginty, S., Pena, E. (2019) A Computational Mechanobiological Model to Simulate the In-Stent Restenosis Process.

Escuer, J., Mcginty, S., Pena, E., Martinez, M. A., Conway, C. (2019) Coupling Solid Mechanics and Drug Transport in 3D for Drug-Eluting Stent Analysis.

Cowley, J., Mcginty, S. (2019) A mathematical model of sonoporation using a liquid-crystalline shelled microbubble. Ultrasonics, 96, pp. 214-219. (doi: 10.1016/j.ultras.2019.01.004)

Grassl, P., Jirásek, M., Gallipoli, D. (2019) Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere. European Journal of Mechanics - A/Solids, 76, pp. 123-134. (doi: 10.1016/j.euromechsol.2019.04.004)

Meere, M., Pontrelli, G., McGinty, S. (2019) Modelling phase separation in amorphous solid dispersions. Acta Biomaterialia, 94, pp. 410-424. (doi: 10.1016/j.actbio.2019.06.009)

Ram, D., Suman, A., Bagui, A. S., Sharma, R., Gupta, V., Yoo, S., Kumar, S., Singh, S. P. (2019) Effectiveness of Solvent Vapor Annealing over Thermal Annealing on the Photovoltaic Performance of Non-Fullerene Acceptor Based BHJ Solar Cells. Scientific Reports, 9, (doi: 10.1038/s41598-019-44232-0)

McKittrick, C., McKee, S., Kennedy, S., Oldroyd, K., Wheel, M., Pontrelli, G., Dixon, S., Mcginty, S., McCormick, C. (2019) Combining mathematical modelling with in vitro experiments to predict in vivo drug-eluting stent performance. Journal of Controlled Release, 303, pp. 151-161. (doi: 10.1016/j.jconrel.2019.03.012)

Hassan, O. I., Ghavamian, A., Lee, C. H., Gil, A. J., Bonet, J., Auricchio, F. (2019) An upwind vertex centred finite volume algorithm for nearly and truly incompressible explicit fast solid dynamic applications: Total and Updated Lagrangian formulations. Journal of Computational Physics: X, 3, (doi: 10.1016/j.jcpx.2019.100025)

Vynnycky, M., McKee, S., Meere, M., McCormick, C., McGinty, S. (2019) Asymptotic analysis of drug dissolution in two layers having widely differing diffusivities. IMA Journal of Applied Mathematics, 84, pp. 533-554. (doi: 10.1093/imamat/hxz002)

Wang, Y., Zhang, K., Qin, X., Li, T., Qiu, J., Yin, T., Huang, J., Pontrelli, G., McGinty, S., Ren, J., Wang, Q., Wu, W., Wang, G. (2019) Biomimetic nanotherapies: red blood cell based core-shell structured nanocomplexes for atherosclerosis management. Advanced Science, 6, (doi: 10.1002/advs.201900172)

Alam, F., Kumar, S., Varadarajan, K. M. (2019) Quantification of adhesion force of bacteria on the surface of biomaterials: techniques and assays. ACS Biomaterials Science and Engineering, 5, pp. 2093-2110. (doi: 10.1021/acsbiomaterials.9b00213)

Garcia-Blanco, E., Ortigosa, R., Gil, A. J., Lee, C. H., Bonet, J. (2019) A new computational framework for electro-activation in cardiac mechanics. Computer Methods in Applied Mechanics and Engineering, 348, pp. 796-845. (doi: 10.1016/j.cma.2019.01.042)

Batou, A., Adhikari, S. (2019) Optimal parameters of viscoelastic tuned-mass dampers. Journal of Sound and Vibration, 445, pp. 17-28. (doi: 10.1016/j.jsv.2019.01.010)

Saxena, P. (2019) Instabilities in the Deformation of Magnetoelastic Membranes.

Grassl, P. (2019) On the Influence of Fibres on Tensile Laps of Reinforcement Loops.

Martinez, M. A., Escuer, J., Mcginty, S., Pena, E. (2019) A Continuum-Approach Model to Numerically Simulate the In-Stent Restenosis Process.

Patole, S. P., Reddy, S. K., Schiffer, A., Askar, K., Prusty, G., Kumar, S. (2019) Piezoresistive and mechanical characteristics of graphene foam nanocomposites. ACS Applied Nano Materials, 2, pp. 1402–1411-1402–1411. (doi: 10.1021/acsanm.8b02306)

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Theoretical limits for negative elastic moduli in subacoustic lattice materials. Physical Review B, 99, (doi: 10.1103/PhysRevB.99.094108)

Rambausek, M., Göküzüm, F. S., Nguyen, L. T. K., Keip, M.-A. (2019) A two-scale FE-FFT approach to nonlinear magneto-elasticity. International Journal for Numerical Methods in Engineering, 117, pp. 1117-1142. (doi: 10.1002/nme.5993)

Smriti, A. K., Grossmann, A., Steinmann, P. (2019) A thermoelastoplastic theory for special Cosserat rods. Mathematics and Mechanics of Solids, 24, pp. 686-700. (doi: 10.1177/1081286517754132)

Scarth, C., Adhikari, S., Cabral, P.H., Silva, G.H.C., Prado, A.P.D. (2019) Random field simulation over curved surfaces: applications to computational structural mechanics. Computer Methods in Applied Mechanics and Engineering, 345, pp. 283-301. (doi: 10.1016/j.cma.2018.10.026)

Limbert, G., Masen, M. A., Pond, D., Graham, H. K., Sherratt, M. J., Jobanputra, R., McBride, A. (2019) Biotribology of the ageing skin—why we should care. Biotribology, 17, pp. 75-90. (doi: 10.1016/j.biotri.2019.03.001)

Giugliano, D., Barbera, D., Chen, H., Cho, N.-K., Yinghua, L. (2019) Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites. European Journal of Mechanics - A/Solids, 74, pp. 66-80. (doi: 10.1016/j.euromechsol.2018.10.015)

Tomlinson, L., Hyndman, L., Firman, J. W., Bentley, R., Kyffin, J. A., Webb, S. D., McGinty, S., Sharma, P. (2019) In vitro liver zonation of primary rat hepatocytes. Frontiers in Bioengineering and Biotechnology, 7, (doi: 10.3389/fbioe.2019.00017)

Mukhopadhyay, T., Adhikari, S., Alu, A. (2019) Probing the frequency-dependent elastic moduli of lattice materials. Acta Materialia, 165, pp. 654-665. (doi: 10.1016/j.actamat.2018.11.012)

Lee, C. H., Gil, A. J., Ghavamian, A., Bonet, J. (2019) A Total Lagrangian upwind Smooth Particle Hydrodynamics algorithm for large strain explicit solid dynamics. Computer Methods in Applied Mechanics and Engineering, 344, pp. 209-250. (doi: 10.1016/j.cma.2018.09.033)

Göküzüm, F. S., Nguyen, L. T. K., Keip, M.-A. (2019) A multiscale FE-FFT framework for electro-active materials at finite strains. Computational Mechanics, 64, pp. 63-84. (doi: 10.1007/s00466-018-1657-7)

Dey, S., Mukhopadhyay, T., Naskar, S., Dey, T.K., Chalak, H.D., Adhikari, S. (2019) Probabilistic characterisation for dynamics and stability of laminated soft core sandwich plates. Journal of Sandwich Structures and Materials, 21, pp. 366-397. (doi: 10.1177/1099636217694229)

Grassl, P., Antonelli, A. (2019) 3D network modelling of fracture processes in fibre-reinforced geomaterials. International Journal of Solids and Structures, 156-57, pp. 234-242. (doi: 10.1016/j.ijsolstr.2018.08.019)

Lu, D., Liang, J., Du, X., Ma, C., Gao, Z. (2019) Fractional elastoplastic constitutive model for soils based on a novel 3D fractional plastic flow rule. Computers and Geotechnics, 105, pp. 277-290. (doi: 10.1016/j.compgeo.2018.10.004)

Mukhopadhyay, T., Adhikari, S., Batou, A. (2019) Frequency domain homogenization for the viscoelastic properties of spatially correlated quasi-periodic lattices. International Journal of Mechanical Sciences, 150, pp. 784-806. (doi: 10.1016/j.ijmecsci.2017.09.004)

Limbert, G., Pond, D., McBride, A. (2019) Constitutive modelling of skin ageing. Springer

Packham, M., Barbera, D. (2019) Investigating the effect of creep propertiesn mismatch in very thin pipes within high-temperature facilities. Springer

Lee, C.-H., Laurence, D., Ross, C., Kramer, K., Babu, A. R., Johnson, E. L., Hsu, M.-C., Aggarwal, A., Mir, A., Burkhart, H. M., Towner, R. A., Baumwart, R., Wu, Y. (2019) Mechanics of the tricuspid valve: from clinical diagnosis/treatment, in vivo and in vitro investigations, to patient-specific biomechanical modeling. Bioengineering, 6, (doi: 10.3390/bioengineering6020047)

Grassl, P. (2019) Modelling the Dynamic Response of Concrete with the Damage Plasticity Model CDPM2.

McBride, A., Davydov, D., Steinmann, P. (2019) Modelling the Flexoelectric Effect in Solids.

Steinmann, P., McBride, A., Javili, A. (2019) Novel Vistas on the Foundations of Peridynamics.

Sciegaj, A., Grassl, P., Larsson, F., Lundgren, K., Runesson, K. (2019) On Periodic Boundary Conditions in Variationally Consistent Homogenisation of Beams and Plates.

Rajkumar, A. R., Shanmugam, K. (2018) Additive manufacturing-enabled shape transformations via FFF 4D printing. Journal of Materials Research, 33, pp. 4362-4376. (doi: 10.1557/jmr.2018.397)

Dugbenoo, E., Arif, M. F., Wardle, B. L., Kumar, S. (2018) Enhanced bonding via additive manufacturing-enabled surface tailoring of 3D printed continuous-fiber composites. Advanced Engineering Materials, 20, (doi: 10.1002/adem.201800691)

Lucena, R.M., Mangiavacchi, N., Pontes, J., Anjos, G., McGinty, S. (2018) On the transport through polymer layer and porous arterial wall in drug-eluting stents. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, (doi: 10.1007/s40430-018-1487-8)

Puliyaneth, M., Barbera, D., Chen, H., Xuan, F. (2018) Study of ratchet limit and cyclic response of welded pipe. International Journal of Pressure Vessels and Piping, 168, pp. 49-58. (doi: 10.1016/j.ijpvp.2018.09.004)

Patole, S. P., Arif, M. F., Kumar, S. (2018) Polyvinyl alcohol incorporated buckypaper composites for improved multifunctional performance. Composites Science and Technology, 168, pp. 429-436. (doi: 10.1016/j.compscitech.2018.10.010)

Kavitha, T., Kumer, S. (2018) Turning date palm fronds into biocompatible mesoporous fluorescent carbon dots. Scientific Reports, 8, (doi: 10.1038/s41598-018-34349-z)

Reddy, S.K., Kumar, S., Varadarajan, K.M., Marpu, P.R., Gupta, T. K., Choosri, M. (2018) Strain and damage-sensing performance of biocompatible smart CNT/UHMWPE nanocomposites. Materials Science and Engineering C: Materials for Biological Applications, 92, pp. 957-968. (doi: 10.1016/j.msec.2018.07.029)

Khan, M.A., Kumar, S., Cantwell, W. J. (2018) Additively manufactured cylindrical systems with stiffness-tailored interface: Modeling and experiments. International Journal of Solids and Structures, 152-53, pp. 71-84. (doi: 10.1016/j.ijsolstr.2018.06.002)

Chen, J., Zhou, B., Qiu, S., Ma, S., Lee, C.-H., Aggarwal, A., Zeng, J., Gao, M., Feng, Y., Li, D., Shan, H. (2018) Evaluation of the laser-induced thermotherapy treatment effect of breast cancer based on tissue viscoelastic properties. Journal of Engineering and Science in Medical Diagnostics and Therapy, 1, (doi: 10.1115/1.4041502)

Khan, M.A., Kumar, S., Reddy, J.N. (2018) Material-tailored adhesively bonded multilayers: A theoretical analysis. International Journal of Mechanical Sciences, 148, pp. 246-262. (doi: 10.1016/j.ijmecsci.2018.08.017)

Pelteret, J.-P., Bastian, W., Steinmann, P. (2018) Application of metaheuristic algorithms to the identification of nonlinear magneto-viscoelastic constitutive parameters. Journal of Magnetism and Magnetic Materials, 464, pp. 116-131. (doi: 10.1016/j.jmmm.2018.02.094)

Haider, J., Lee, C. H., Gil, A. J., Huerta, A., Bonet, J. (2018) An upwind cell centred Total Lagrangian finite volume algorithm for nearly incompressible explicit fast solid dynamic applications. Computer Methods in Applied Mechanics and Engineering, 340, pp. 684-727. (doi: 10.1016/j.cma.2018.06.010)

McBride, A.T., Reddy, B.D., Steinmann, P. (2018) Dissipation-consistent modelling and classification of extended plasticity formulations. Journal of the Mechanics and Physics of Solids, 119, pp. 118-139. (doi: 10.1016/j.jmps.2018.06.002)

Shvarts, A. G., Yastrebov, V. A. (2018) Fluid flow across a wavy channel brought in contact. Tribology International, 126, pp. 116-126. (doi: 10.1016/j.triboint.2018.05.005)

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Sample-based and sample-aggregated based Galerkin projection schemes for structural dynamics. Probabilistic Engineering Mechanics, 54, pp. 118-130. (doi: 10.1016/j.probengmech.2017.09.002)

Arif, M. F., Kumar, S., Gupta, T. K., Varadarajan, K. M. (2018) Strong linear-piezoresistive-response of carbon nanostructures reinforced hyperelastic polymer nanocomposites. Composites Part A: Applied Science and Manufacturing, 113, pp. 141-149. (doi: 10.1016/j.compositesa.2018.07.021)

Esmaeili, A., Steinmann, P., Javili, A. (2018) Surface plasticity: theory and computation. Computational Mechanics, 62, pp. 617-634. (doi: 10.1007/s00466-017-1517-x)

Shvarts, A.G., Yastrebov, V.A. (2018) Trapped fluid in contact interface. Journal of the Mechanics and Physics of Solids, 119, pp. 140-162. (doi: 10.1016/j.jmps.2018.06.016)

Ubaid, J., Wardle, B. L., Kumar, S. (2018) Strength and performance enhancement of multilayers by spatial tailoring of adherend compliance and morphology via multimaterial jetting additive manufacturing. Scientific Reports, 8, (doi: 10.1038/s41598-018-31819-2)

Escuer, J., Pena, E., Martinez, M.A., Mcginty, S. (2018) Elucidating the Importance of Drug Dissolution and Specific-binding in a 2D Model of Arterial Drug-eluting Stents.

Escuer, J., Pena, E., Martinez, M.A., Mcginty, S. (2018) On the Relationship Between Mechanical Deformation and Drug Transport Properties of the Arterial Wall.

Gallipoli, D., Grassl, P., Wheeler, S., Gens, A. (2018) On the choice of stress–strain variables for unsaturated soils and its effect on plastic flow. Geomechanics for Energy and the Environment, 15, pp. 3-9. (doi: 10.1016/j.gete.2018.02.002)

Huang, W., Creed, M., Chen, F., Liu, H., Ma, A. (2018) Scour around submerged spur dikes with flexible mattress protection. Journal of Waterway, Port, Coastal, and Ocean Engineering, 144, (doi: 10.1061/(ASCE)WW.1943-5460.0000466)

Andres, S., Steinmann, P., Budday, S. (2018) The origin of compression influences geometric instabilities in bilayers. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 474, (doi: 10.1098/rspa.2018.0267)

Pryse, S.E., Kundu, A., Adhikari, S. (2018) Projection methods for stochastic dynamic systems: A frequency domain approach. Computer Methods in Applied Mechanics and Engineering, 338, pp. 412-439. (doi: 10.1016/j.cma.2018.04.025)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C. (2018) Spectral element-based method for a one-dimensional damaged structure with distributed random properties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, (doi: 10.1007/s40430-018-1330-2)

Mei, Y., Hurtado, D. E., Pant, S., Aggarwal, A. (2018) On improving the numerical convergence of highly nonlinear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 337, pp. 110-127. (doi: 10.1016/j.cma.2018.03.033)

Karličić, D., Cajić, M., Adhikari, S. (2018) Dynamic stability of a nonlinear multiple-nanobeam system. Nonlinear Dynamics, 93, pp. 1495-1517. (doi: 10.1007/s11071-018-4273-3)

Gao, Z., Al-Budairi, H., Steel, A. (2018) Experimental testing of low energy rockfall catch fence meshes. Journal of Rock Mechanics and Geotechnical Engineering, 10, pp. 798-804. (doi: 10.1016/j.jrmge.2018.01.004)

Escuer, J., Cebollero, M., Pena, E., Mcginty, S., Martinez, M. A. (2018) Computational Modelling of the Effect of Mechanical Expansion on Drug Delivery from Endovascular Devices.

Escuer, J., Scullion, B., McCormick, C., Mcginty, S. (2018) On The Influence of Non-Uniform Binding Site Density in Determining Arterial Drug Distribution Following Stent-Based Delivery.

Cui, Y., Ravnik, J., Hriberšekb, M., Steinmann, P. (2018) A novel model for the lift force acting on a prolate spheroidal particle in an arbitrary non-uniform flow. Part I. Lift force due to the streamwise flow shear. International Journal of Multiphase Flow, 104, pp. 103-112. (doi: 10.1016/j.ijmultiphaseflow.2018.03.007)

Du, R., Wang, Y., Huang, Y., Zhao, Y., Du, D., Zhang, Y., Li, Z., McGinty, S., Pontrelli, G., Yin, T., Wang, G. (2018) Design and testing of hydrophobic core/hydrophilic shell nano/micro particles for drug-eluting stent coating. NPG Asia Materials, 10, pp. 642-658. (doi: 10.1038/s41427-018-0064-z)

Vo, T. T.N., Morgan, S., McCormick, C., McGinty, S., McKee, S., Meere, M. (2018) Modelling drug release from polymer-free coronary stents with microporous surfaces. International Journal of Pharmaceutics, 544, pp. 392-401. (doi: 10.1016/j.ijpharm.2017.12.007)

Escuer, J., Pena, E., Mcginty, S., Martinez, M. A. (2018) Computational Analysis of the Influence of Dissolution-Diffusion and Specific Binding on Drug Transport in the Arterial Wall following Stent-based Delivery.

Schmitt, O., Steinmann, P. (2018) Control of minimum member size in parameter-free structural shape optimization by a medial axis approximation. Computational Mechanics, 61, pp. 717-727. (doi: 10.1007/s00466-017-1477-1)

Saxena, P. (2018) Finite deformations and incremental axisymmetric motions of a magnetoelastic tube. Mathematics and Mechanics of Solids, 23, pp. 950-983. (doi: 10.1177/1081286517697502)

Zhang, D.P., Lei, Y.J., Adhikari, S. (2018) Flexoelectric effect on vibration responses of piezoelectric nanobeams embedded in viscoelastic medium based on nonlocal elasticity theory. Acta Mechanica, 229, pp. 2379-2392. (doi: 10.1007/s00707-018-2116-4)

McQueen, A., Parente, J. D., Mcginty, S., Moeller, K. (2018) Parameter search to find ranges of activation and inhibition of wound healing rate in a mathematical model with introduced photobiomodulation. Springer

Arif, M.F., Kumar, S., Varadarajan, K.M., Cantwell, W.J. (2018) Performance of biocompatible PEEK processed by fused deposition additive manufacturing. Materials and Design, 146, pp. 249-259. (doi: 10.1016/j.matdes.2018.03.015)

Caspari, M., Landkammer, P., Steinmann, P. (2018) A non-invasive node-based form finding approach with discretization-independent target configuration. Advanced Modeling and Simulation in Engineering Sciences, 5, (doi: 10.1186/s40323-018-0104-9)

Pond, D., McBride, A.T., Davids, L.M., Reddy, B.D., Limbert, G. (2018) Microstructurally-based constitutive modelling of the skin – linking intrinsic ageing to microstructural parameters. Journal of Theoretical Biology, 444, pp. 108-123. (doi: 10.1016/j.jtbi.2018.01.014)

Khan, M.A., Kumar, S. (2018) Performance enhancement of tubular multilayers via compliance-tailoring: 3D printing, testing and modeling. International Journal of Mechanical Sciences, 140, pp. 93-108. (doi: 10.1016/j.ijmecsci.2018.02.038)

Madinei, H., Haddad Khodaparast, H., Friswell, M.I., Adhikari, S. (2018) Minimising the effects of manufacturing uncertainties in MEMS Energy harvesters. Energy, 149, pp. 990-999. (doi: 10.1016/j.energy.2018.02.048)

Pivovarov, D., Steinmann, P., Willner, K. (2018) Two reduction methods for stochastic FEM based homogenization using global basis functions. Computer Methods in Applied Mechanics and Engineering, 332, pp. 488-519. (doi: 10.1016/j.cma.2018.01.002)

de Villiers, A.M., McBride, A.T., Reddy, B.D., Franz, T., Spottiswoode, B.S. (2018) A validated patient-specific FSI model for vascular access in haemodialysis. Biomechanics and Modeling in Mechanobiology, 17, pp. 479-497. (doi: 10.1007/s10237-017-0973-8)

Landkammer, P., Caspari, M., Steinmann, P. (2018) Improvements on a non-invasive, parameter-free approach to inverse form finding. Computational Mechanics, 61, pp. 433-447. (doi: 10.1007/s00466-017-1468-2)

Reddy, N. H., Saxena, P. (2018) Instabilities in the axisymmetric magnetoelastic deformation of a cylindrical membrane. International Journal of Solids and Structures, 136-37, pp. 203-219. (doi: 10.1016/j.ijsolstr.2017.12.015)

Davie, C.T., Pearce, C.J., Kukla, K., Bićanić, N. (2018) Modelling of transport processes in concrete exposed to elevated temperatures – An alternative formulation for sorption isotherms. Cement and Concrete Research, 106, pp. 144-154. (doi: 10.1016/j.cemconres.2018.01.012)

Aggarwal, A. (2018) Determination of prestress and elastic properties of virus capsids. Physical Review E, 97, (doi: 10.1103/PhysRevE.97.032414)

Machado, M.R., Adhikari, S., Dos Santos, J.M.C., Arruda, J.R.F. (2018) Estimation of beam material random field properties via sensitivity-based model updating using experimental frequency response functions. Mechanical Systems and Signal Processing, 102, pp. 180-197. (doi: 10.1016/j.ymssp.2017.08.039)

El, G.A., Nguyen, L.T.K., Smyth, N.F. (2018) Dispersive shock waves in systems with nonlocal dispersion of Benjamin-Ono type. Nonlinearity, 31, pp. 1392-1416. (doi: 10.1088/1361-6544/aaa10a)

Grassl, P., Johansson, M., Leppänen, J. (2018) On the numerical modelling of bond for the failure analysis of reinforced concrete. Engineering Fracture Mechanics, 189, pp. 13-26. (doi: 10.1016/j.engfracmech.2017.10.008)

Coccarelli, A., Edwards, D. H., Aggarwal, A., Nithiarasu, P., Parthimos, D. (2018) A multiscale active structural model of the arterial wall accounting for smooth muscle dynamics. Journal of the Royal Society: Interface, 15, (doi: 10.1098/rsif.2017.0732)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2018) Probing the shear modulus of two-dimensional multiplanar nanostructures and heterostructures. Nanoscale, 10, pp. 5280-5294. (doi: 10.1039/c7nr07261a)

Grassl, P., Antonelli, A. (2018) Network Modelling of Fracture Processes in Fibre-Reinforced Quasi-Brittle Materials.

Kaessmair, S., Steinmann, P. (2018) Computational first-order homogenization in chemo-mechanics. Archive of Applied Mechanics, 88, pp. 271-286. (doi: 10.1007/s00419-017-1287-0)

Budday, S., Steinmann, P. (2018) On the influence of inhomogeneous stiffness and growth on mechanical instabilities in the developing brain. International Journal of Solids and Structures, 132-33, pp. 31-41. (doi: 10.1016/j.ijsolstr.2017.08.010)

Hossain, M., Steinmann, P. (2018) Modelling electro-active polymers with a dispersion-type anisotropy. Smart Materials and Structures, 27, (doi: 10.1088/1361-665X/aa9f88)

Kumar, S., Wardle, B. L., Arif, M. F., Ubaid, J. (2018) Stress reduction of 3D printed compliance-tailored multilayers. Advanced Engineering Materials, 20, (doi: 10.1002/adem.201700883)

Nguyen, L. T. K., Keip, M.-A. (2018) A data-driven approach to nonlinear elasticity. Computers and Structures, 194, pp. 97-115. (doi: 10.1016/j.compstruc.2017.07.031)

Zabihyan, R., Mergheim, J., Javili, A., Steinmann, P. (2018) Aspects of computational homogenization in magneto-mechanics: Boundary conditions, RVE size and microstructure composition. International Journal of Solids and Structures, 130-13, pp. 105-121. (doi: 10.1016/j.ijsolstr.2017.10.009)

Athanasiadis, I., Wheeler, S. J., Grassl, P. (2018) Hydro-mechanical network modelling of particulate composites. International Journal of Solids and Structures, 130-31, pp. 49-60. (doi: 10.1016/j.ijsolstr.2017.10.017)

Dey, S., Mukhopadhyay, T., Sahu, S.K., Adhikari, S. (2018) Stochastic dynamic stability analysis of composite curved panels subjected to non-uniform partial edge loading. European Journal of Mechanics - A/Solids, 67, pp. 108-122. (doi: 10.1016/j.euromechsol.2017.09.005)

Adhikari, S., Friswell, M.I. (2018) A Stochastic Multidomain Approach for Mid-frequency Vibration Problems.

Malaji, P.V., Doddi, S., Friswell, M.I., Adhikari, S. (2018) Analysis of Pendulums Coupled by Torsional Springs for Energy Harvesting. (doi: 10.1051/matecconf/201821105008)

Saeb, S., Steinmann, P., Javili, A. (2018) Bounds on size-dependent behaviour of composites. Philosophical Magazine, 98, pp. 437-463. (doi: 10.1080/14786435.2017.1408967)

Rajagopal, A., Kraus, M., Steinmann, P. (2018) Hyperelastic analysis based on a polygonal finite element method. Mechanics of Advanced Materials and Structures, 25, pp. 930-942. (doi: 10.1080/15376494.2017.1329463)

Caspari, M., Landkammer, P., Steinmann, P. (2018) Illustration of an improved non-invasive form finding algorithm. AIP Conference Proceedings, 1960, (doi: 10.1063/1.5034960)

Cui, Y., Ravnik, J., Hriberšek, M., Steinmann, P. (2018) On constitutive models for the momentum transfer to particles in fluid-dominated two-phase flows. Springer

Mehnert, M., Mathieu-Pennober, T., Steinmann, P. (2018) On the influence of the coupled invariant in thermo-electro-elasticity. Springer

Pryse, S.E., Adhikari, S., Kundu, A. (2018) Projection Methods for Stochastic Structural Dynamics. (doi: 10.1051/matecconf/201821101003)

Maneshi, M.A., Ghavanloo, E., Fazelzadeh, S.A., Friswell, M.I., Adhikari, S. (2018) Semi-analytical Solution for Postbuckling Behavior of Highly Deformable Nanobeams.

Meere, M., Mcginty, S., Pontrelli, G. (2017) Mathematically Modelling the Dissolution of Solid Dispersions.

Mehnert, M., Hossain, M., Steinmann, P. (2017) Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers. International Journal of Solids and Structures, 128, pp. 117-132. (doi: 10.1016/j.ijsolstr.2017.08.022)

Khodaparast, H. H., Govers, Y., Dayyani, I., Adhikari, S., Link, M., Friswell, M.I., Mottershead, J.E., Sienz, J. (2017) Fuzzy finite element model updating of the DLR AIRMOD test structure. Applied Mathematical Modelling, 52, pp. 512-526. (doi: 10.1016/j.apm.2017.08.001)

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective mechanical properties of multilayer nano-heterostructures. Scientific Reports, 7, (doi: 10.1038/s41598-017-15664-3)

Sinclair, H., Attal, M., Borthwick, A., Budimir, M., Creed, M., Dingle, E., Dugar, S. (2017) Improving understanding of flooding and resilience in the Terai, Nepal.

Barbera, D., Chen, H., Liu, Y. (2017) Advances on creep–fatigue damage assessment in notched components. Fatigue and Fracture of Engineering Materials and Structures, 40, pp. 1854-1867. (doi: 10.1111/ffe.12603)

Scarth, C., Adhikari, S. (2017) Modeling spatially varying uncertainty in composite structures using lamination parameters. AIAA Journal, 55, pp. 3951-3965. (doi: 10.2514/1.J055705)

Pryse, S.E., Adhikari, S. (2017) Stochastic finite element response analysis using random eigenfunction expansion. Computers and Structures, 192, pp. 1-15. (doi: 10.1016/j.compstruc.2017.06.014)

Soldner, D., Brands, B., Zabihyan, R., Steinmann, P., Mergheim, J. (2017) A numerical study of different projection-based model reduction techniques applied to computational homogenisation. Computational Mechanics, 60, pp. 613-625. (doi: 10.1007/s00466-017-1428-x)

Mukhopadhyay, T., Adhikari, S. (2017) Effective in-plane elastic moduli of quasi-random spatially irregular hexagonal lattices. International Journal of Engineering Science, 119, pp. 142-179. (doi: 10.1016/j.ijengsci.2017.06.004)

Reddy, N. H., Saxena, P. (2017) Limit points in the free inflation of a magnetoelastic toroidal membrane. International Journal of Non-Linear Mechanics, 95, pp. 248-263. (doi: 10.1016/j.ijnonlinmec.2017.06.017)

Barbera, D., Chen, H., Liu, Y., Xuan, F. (2017) Recent developments of the linear matching method framework for structural integrity assessment. Journal of Pressure Vessel Technology, 139, (doi: 10.1115/1.4036919)

Soldner, D., Steinmann, P., Mergheim, J. (2017) Thermal Modelling of Selective Beam Melting Processes using Heterogeneous Time Step Sizes.

Budday, S., Sommer, G., Holzapfel, G.A., Steinmann, P., Kuhl, E. (2017) Viscoelastic parameter identification of human brain tissue. Journal of the Mechanical Behavior of Biomedical Materials, 74, pp. 463-476. (doi: 10.1016/j.jmbbm.2017.07.014)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Polynomial chaos-based extended Padé expansion in structural dynamics. International Journal for Numerical Methods in Engineering, 111, pp. 1170-1191. (doi: 10.1002/nme.5497)

Budday, S., Sommer, G., Haybaeck, J., Steinmann, P., Holzapfel, G., Kuhl, E. (2017) Rheological characterization of human brain tissue. Acta Biomaterialia, 60, pp. 315-329. (doi: 10.1016/j.actbio.2017.06.024)

Kaczmarczyk, Ł., Ullah, Z., Pearce, C. J. (2017) Energy consistent framework for continuously evolving 3D crack propagation. Computer Methods in Applied Mechanics and Engineering, 324, pp. 54-73. (doi: 10.1016/j.cma.2017.06.001)

Landkamer, P., Sohngen, B., Steinmann, P., Willner, K. (2017) On gradient-based optimization strategies for inverse problems in metal forming. GAMM-Mitteilungen, 40, pp. 27-50. (doi: 10.1002/gamm.201710004)

Steinmann, P., Menzel, A. (2017) Preface of the guest editors. GAMM Mitteilungen, 40, pp. 7. (doi: 10.1002/gamm.201710002)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) Robust design optimization for crashworthiness of vehicle side impact. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 3, (doi: 10.1115/1.4035439)

Esmaeili, A., Javili, A., Steinmann, P. (2017) Highly-conductive energetic coherent interfaces subject to in-plane degradation. Mathematics and Mechanics of Solids, 22, pp. 1696-1716. (doi: 10.1177/1081286516642818)

Aggarwal, A. (2017) An improved parameter estimation and comparison for soft tissue constitutive models containing an exponential function. Biomechanics and Modeling in Mechanobiology, 16, pp. 1309-1327. (doi: 10.1007/s10237-017-0889-3)

Walter, B. L., Pelteret, J.-P., Kaschta, J., Schubert, D. W., Steinmann, P. (2017) On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: I. Detecting wall slip. Polymer Testing, 61, pp. 430-440. (doi: 10.1016/j.polymertesting.2017.05.035)

Walter, B. L., Pelteret, J.-P., Kaschta, J., Schubert, D. W., Steinmann, P. (2017) On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: II. Influence of experimental conditions. Polymer Testing, 61, pp. 455-463. (doi: 10.1016/j.polymertesting.2017.05.036)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2017) Metamodel based high-fidelity stochastic analysis of composite laminates: a concise review with critical comparative assessment. Composite Structures, 171, pp. 227-250. (doi: 10.1016/j.compstruct.2017.01.061)

Mukhopadhyay, T., Chakraborty, S., Dey, S., Adhikari, S., Chowdhury, R. (2017) A critical assessment of Kriging model variants for high-fidelity uncertainty quantification in dynamics of composite shells. Archives of Computational Methods in Engineering, 24, pp. 495-518. (doi: 10.1007/s11831-016-9178-z)

Chakraborty, S., Chatterjee, T., Chowdhury, R., Adhikari, S. (2017) A surrogate based multi-fidelity approach for robust design optimization. Applied Mathematical Modelling, 47, pp. 726-744. (doi: 10.1016/j.apm.2017.03.040)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) Efficient system reliability analysis of earth slopes based on support vector machine regression model. Academic Press

Boulkaibet, I., Mthembu, L., Marwala, T., Friswell, M.I., Adhikari, S. (2017) Finite element model updating using Hamiltonian Monte Carlo techniques. Inverse Problems in Science and Engineering, 25, pp. 1042-1070. (doi: 10.1080/17415977.2016.1215446)

McGinty, S., King, D., Pontrelli, G. (2017) Mathematical modelling of variable porosity coatings for controlled drug release. Medical Engineering and Physics, 45, pp. 51-60. (doi: 10.1016/j.medengphy.2017.04.006)

Metya, S., Mukhopadhyay, T., Adhikari, S., Bhattacharya, G. (2017) System reliability analysis of soil slopes with general slip surfaces using multivariate adaptive regression splines. Computers and Geotechnics, 87, pp. 212-228. (doi: 10.1016/j.compgeo.2017.02.017)

Karličić, D., Cajić, M., Adhikari, S., Kozić, P., Murmu, T. (2017) Vibrating nonlocal multi-nanoplate system under inplane magnetic field. European Journal of Mechanics - A/Solids, 64, pp. 29-45. (doi: 10.1016/j.euromechsol.2017.01.013)

Al-Budairi, H., Gao, Z., Steel, A., Davies, T., Wheeler, S. (2017) Improving Protection Against Rockfall Accidents on Railway Networks.

Mukhopadhyay, T., Mahata, A., Adhikari, S., Asle Zaeem, M. (2017) Effective elastic properties of two dimensional multiplanar hexagonal nanostructures. 2D Materials, 4, (doi: 10.1088/2053-1583/aa551c)

Al-Budairi, H., Gao, Z., Steel, A., Davies, T., Wheeler, S. (2017) Condition Monitoring System for Rockfall Catch Fences.

Al-Budairi, H., Gao, Z., Steel, A., Davies, T., Wheeler, S. (2017) Improving the Design of Low-Energy Rockfall Catch Fences.

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Berger, H. (2017) Homogenization of porous piezoelectric materials. International Journal of Solids and Structures, 113-14, pp. 218-229. (doi: 10.1016/j.ijsolstr.2017.03.003)

Budday, S., Andres, S., Walter, B., Steinmann, P., Kruhl, E. (2017) Wrinkling instabilities in soft bilayered systems. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 375, (doi: 10.1098/rsta.2016.0163)

Shariff, M.H.B.M., Bustamante, R., Hossain, M., Steinmann, P. (2017) A novel spectral formulation for transversely isotropic magneto-elasticity. Mathematics and Mechanics of Solids, 22, pp. 1158-1176. (doi: 10.1177/1081286515618999)

Machado, M. R., Adhikari, S., Dos Santos, J. M. C. (2017) A spectral approach for damage quantification in stochastic dynamic systems. Mechanical Systems and Signal Processing, 88, pp. 253-273. (doi: 10.1016/j.ymssp.2016.11.018)

Lee, C. H., Gil, A. J., Hassan, O. I., Bonet, J., Kulasegaram, S. (2017) A variationally consistent Streamline Upwind Petrov–Galerkin Smooth Particle Hydrodynamics algorithm for large strain solid dynamics. Computer Methods in Applied Mechanics and Engineering, 318, pp. 514-536. (doi: 10.1016/j.cma.2017.02.002)

Schmitt, O., Steinmann, P. (2017) On curvature approximation in 2D and 3D parameter-free shape optimization. Structural and Multidisciplinary Optimization, 55, pp. 1655-1669. (doi: 10.1007/s00158-016-1595-y)

Gao, Z., Zhao, J., Yin, Z.-Y. (2017) Dilatancy relation for overconsolidated clay. International Journal of Geomechanics, 17, (doi: 10.1061/(ASCE)GM.1943-5622.0000793)

Zhou, X.-Y., Gosling, P.D., Ullah, Z., Kaczmarczyk, L., Pearce, C.J. (2017) Stochastic multi-scale finite element based reliability analysis for laminated composite structures. Applied Mathematical Modelling, 45, pp. 457-473. (doi: 10.1016/j.apm.2016.12.005)

Creed, M. J., Draper, S., Nishino, T., Borthwick, A. G. L. (2017) Flow through a very porous obstacle in a shallow channel. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 473, (doi: 10.1098/rspa.2016.0672)

Javili, A., Steinmann, P., Mosler, J. (2017) Micro-to-macro transition accounting for general imperfect interfaces. Computer Methods in Applied Mechanics and Engineering, 217, pp. 274-317. (doi: 10.1016/j.cma.2016.12.025)

Boddu, V., Endres, F., Steinmann, P. (2017) Molecular dynamics study of ferroelectric domain nucleation and domain switching dynamics. Scientific Reports, 7, (doi: 10.1038/s41598-017-01002-0)

Fahy, C., Wheeler, S. J., Gallipoli, D., Grassl, P. (2017) Corrosion induced cracking modelled by a coupled transport-structural approach. Cement and Concrete Research, 94, pp. 24-35. (doi: 10.1016/j.cemconres.2017.01.007)

Riehl, S., Steinmann, P. (2017) On structural shape optimization using an embedding domain discretization technique. International Journal for Numerical Methods in Engineering, 109, pp. 1315-1343. (doi: 10.1002/nme.5326)

Kumar, S., Pal, G., Shah, T. (2017) High performance overhead power lines with carbon nanostructures for transmission and distribution of electricity from renewable sources. Journal of Cleaner Production, 145, pp. 180-187. (doi: 10.1016/j.jclepro.2017.01.053)

Ullah, Z., Kaczmarczyk, Ł., Grammatikos, S.A., Evernden, M.C., Pearce, C.J. (2017) Multi-scale computational homogenisation to predict the long-term durability of composite structures. Computers and Structures, 181, pp. 21-31. (doi: 10.1016/j.compstruc.2016.11.002)

Esmaeili, A., Steinmann, P., Javili, A. (2017) Non-coherent energetic interfaces accounting for degradation. Computational Mechanics, 59, pp. 361-383. (doi: 10.1007/s00466-016-1342-7)

Fillep, S., Mergheim, J., Steinmann, P. (2017) Towards an efficient two-scale approach to model technical textiles. Computational Mechanics, 59, pp. 385-401. (doi: 10.1007/s00466-016-1354-3)

Liu, S., Pfaller, S., Rahimi, M., Possart, G., Steinmann, P., Bohm, M. C., Muller-Plathe, F. (2017) Uniaxial deformation of polystyrene-silica nanocomposites studied by hybrid molecular dynamics-finite element simulations. Computational Materials Science, 129, pp. 1-12. (doi: 10.1016/j.commatsci.2016.11.031)

Khodaparast, H. H., Madinei, H., Friswell, M. I., Adhikari, S., Coggon, S., Cooper, J. E. (2017) An extended harmonic balance method based on incremental nonlinear control parameters. Mechanical Systems and Signal Processing, 85, pp. 716-729. (doi: 10.1016/j.ymssp.2016.09.008)

Mukhopadhyay, T., Adhikari, S. (2017) Stochastic mechanics of metamaterials. Composite Structures, 162, pp. 85-97. (doi: 10.1016/j.compstruct.2016.11.080)

Esmaeili, A., Steinmann, P., Javili, A. (2017) Coupled thermally general imperfect and mechanically coherent energetic interfaces subject to in-plane degradation. Journal of Mechanics of Materials and Structures, 12, pp. 289-312. (doi: 10.2140/jomms.2017.12.289)

Gao, Z., Zhao, J. (2017) A non-coaxial critical-state model for sand accounting for fabric anisotropy and fabric evolution. International Journal of Solids and Structures, 106-07, pp. 200-212. (doi: 10.1016/j.ijsolstr.2016.11.019)

Wilmers, J., McBride, A., Bargmann, S. (2017) Interface elasticity effects in polymer-filled nanoporous metals. Journal of the Mechanics and Physics of Solids, 99, pp. 163 - 177. (doi: 10.1016/j.jmps.2016.11.011)

Riedlbauer, D., Scharowsky, T., Singer, R. F., Steinmann, P., Körner, C., Mergheim, J. (2017) Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V. International Journal of Advanced Manufacturing Technology, 88, pp. 1309-1317. (doi: 10.1007/s00170-016-8819-6)

Ullah, Z., Kaczmarczyk, Ł., Pearce, C.J. (2017) Three-dimensional nonlinear micro/meso-mechanical response of the fibre-reinforced polymer composites. Composite Structures, 161, pp. 204-214. (doi: 10.1016/j.compstruct.2016.11.059)

Steinmann, P., Vu, D. K. (2017) Computational challenges in the simulation of nonlinear electroelasticity. Computer Assisted Mechanics and Engineering Sciences, 19, pp. 199-122.

Kraus, M., Steinmann, P. (2017) Finite element formulations for 3D convex polyhedral in nonlinear continuum mechanics. Computer Assisted Mechanics and Engineering Sciences, 19, pp. 121-134.

Landkammer, P., Germain, S., Steinmann, P. (2017) On inverse form finding for orthotropic plasticity. Computer Assisted Mechanics and Engineering Sciences, 20, pp. 337-348.

Carstensen, C., Ebobisse, F., McBride, A.T., Reddy, B.D., Steinmann, P. (2017) Some properties of the dissipative model of strain-gradient plasticity. Philosophical Magazine, 97, pp. 693-717. (doi: 10.1080/14786435.2016.1274836)

Haider, J., Lee, C. H., Gil, A. J., Bonet, J. (2017) A first-order hyperbolic framework for large strain computational solid dynamics: an upwind cell centred Total Lagrangian scheme. International Journal for Numerical Methods in Engineering, 109, pp. 407-456. (doi: 10.1002/nme.5293)

Budday, S., Sommer, G., Birkl, C., Langkammer, C., Haybaeck, J., Kohnert, J., Bauer, M., Paulsen, F., Steinmann, P., Kuhl, E., Holzapfel, G.A. (2017) Mechanical characterization of human brain tissue. Acta Biomaterialia, 48, pp. 319-340. (doi: 10.1016/j.actbio.2016.10.036)

Naskar, S., Mukhopadhyay, T., Sriramula, S., Adhikari, S. (2017) Stochastic natural frequency analysis of damaged thin-walled laminated composite beams with uncertainty in micromechanical properties. Composite Structures, 160, pp. 312-334. (doi: 10.1016/j.compstruct.2016.10.035)

Kumar, S., Wardle, B. L., Arif, M. F. (2017) Strength and performance enhancement of bonded joints by spatial tailoring of adhesive compliance via 3D printing. ACS Applied Materials and Interfaces, 9, pp. 884-891. (doi: 10.1021/acsami.6b13038)

Schindler, S., Steinmann, P., Aurich, J. C., Zimmermann, M. (2017) A thermo-viscoplastic constitutive law for isotropic hardening of metals. Archive of Applied Mechanics, 87, pp. 129-157. (doi: 10.1007/s00419-016-1181-1)

Yao, Y., Tian, Y., Gao, Z. (2017) Anisotropic UH model for soils based on a simple transformed stress method. International Journal for Numerical and Analytical Methods in Geomechanics, 41, pp. 54-78. (doi: 10.1002/nag.2545)

Javili, A., Saeb, S., Steinmann, P. (2017) Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions. Computational Mechanics, 59, pp. 21-35. (doi: 10.1007/s00466-016-1333-8)

Giugliano, D., Barbera, D., Chen, H. (2017) Effect of fiber cross section geometry on cyclic plastic behavior of continuous fiber reinforced aluminum matrix composites. European Journal of Mechanics - A/Solids, 61, pp. 35-46. (doi: 10.1016/j.euromechsol.2016.09.002)

Caspari, M., Landkammer, P., Steinmann, P. (2017) Inverse form finding with H-adaptivity and an application to a notch stamping process.

Boddu, V., Endres, F., Steinmann, P. (2017) Non-Linear Switching Kinetics of Ferroelectric Mono-Domain Single Crystals.

Schindler, S., Mergheim, J., Zimmermann, M., Aurich, J. C., Steinmann, P. (2017) Numerical homogenization of elastic and thermal material properties for metal matrix composites (MMC) Continuum Mechanics and Thermodynamics, 29, pp. 51-75. (doi: 10.1007/s00161-016-0515-0)

Kasi, B., Rajagopal, A., Steinmann, P. (2017) Adaptive Poly-FEM for the analysis of plane elasticity problems. International Journal for Computational Methods in Engineering Science and Mechanics, 18, pp. 146-165. (doi: 10.1080/15502287.2017.1301596)

McGinty, S., McCormick, C., McKittrick, C., Kennedy, S., Oldroyd, K., Wheel, M., Scullion, B., Pontrelli, G., McKee, S. (2017) Combining Mathematical Modelling with In-Vitro Experiments to Predict In-Vivo Drug-Eluting Stent Kinetics.

Davydov, D., Gerasimov, T., Pelteret, J.-P., Steinmann, P. (2017) Convergence study of the h-adaptive PUM and the hp-adaptive FEM applied to eigenvalue problems in quantum mechanics. Advanced Modeling and Simulation in Engineering Sciences, 4, (doi: 10.1186/s40323-017-0093-0)

Barbera, D., Chen, H., Luan, W. (2017) Direct Method on Creep Fatigue Damage Assessment Considering Full Creep-Cyclic Plasticity Interaction. (doi: 10.1115/PVP2017-65080)

Martínez-Ayuso, G., Friswell, M. I., Adhikari, S., Khodaparast, H. H., Featherston, C. A. (2017) Energy harvesting using porous piezoelectric beam with impacts. Procedia Engineering, 199, pp. 3468-3473. (doi: 10.1016/j.proeng.2017.09.454)

Arora, V., Friswell, M., Adhikari, S. (2017) FRF-based Probabilistic Model Updating in Structural Dynamics for Uncertainty Identification and Quantification.

Carstensen, C., Ebobisse, F., McBride, A. T., Reddy, B. D., Steinmann, P. (2017) Flow relations and yield functions for dissipative strain-gradient plasticity. Springer Singapore

McGinty, S., Hyndman, L., Mottram, N., McKee, S., Webb, S. (2017) In-silico Characterisation of the Kirkstall QV900 In-Vitro System for Advanced Cell Culture.

Adhikari, S. (2017) Inertial mass sensing with low Q-factor vibrating microcantilevers. Journal of Applied Physics, 122, (doi: 10.1063/1.4993678)

McGinty, S., Pontrelli, G. (2017) Mathematical Modelling of Variable Porosity Coatings for Dual Drug Delivery.

Yastrebov, V. A., Anciaux, G., Shvarts, A. G., Molinari, J.-F., Cailletaud, G. (2017) Modeling Creeping Flow through a Closed Crack with a Self-Affine Geometry and an Extension to Permeability of Cracked Media. (doi: 10.1061/9780784480779.154)

Madinei, H., Khodaparast, H.H., Friswell, M.I., Adhikari, S., Shaw, A.D. (2017) Nonlinear MEMS Piezoelectric Harvesters in the presence of geometric and structural variabilities. Procedia Engineering, 199, pp. 3456-3461. (doi: 10.1016/j.proeng.2017.09.451)

Mehnert, M., Pelteret, J.-P., Steinmann, P. (2017) Numerical modelling of nonlinear thermo-electro-elasticity. Mathematics and Mechanics of Solids, 22, pp. 2196-2213. (doi: 10.1177/1081286517729867)

Jacquelin, E., Dessombz, O., Sinou, J.-J., Adhikari, S., Friswell, M.I. (2017) Steady-state response of a random dynamical system described with Padé approximants and random eigenmodes. Procedia Engineering, 199, pp. 1104-1109. (doi: 10.1016/j.proeng.2017.09.212)

Creed, M. J., Apostolidou, I.-G., Taylor, P. H., Borthwick, A. G. L. (2016) A finite volume shock-capturing solver of the fully coupled shallow water-sediment equations. International Journal for Numerical Methods in Fluids, 84, pp. 509-542. (doi: 10.1002/fld.4359)

Madinei, H., Khodaparast, H. H., Adhikari, S., Friswell, M. I. (2016) Design of MEMS piezoelectric harvesters with electrostatically adjustable resonance frequency. Mechanical Systems and Signal Processing, 81, pp. 360-374. (doi: 10.1016/j.ymssp.2016.03.023)

Pelteret, J.-P., Davydov, D., McBride, A., Vu, D. K., Steinmann, P. (2016) Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space. International Journal for Numerical Methods in Engineering, 108, pp. 1307-1342. (doi: 10.1002/nme.5254)

Soares, J. S., Feaver, K. R., Zhang, W., Kamensky, D., Aggarwal, A., Sacks, M. S. (2016) Biomechanical behavior of bioprosthetic heart valve heterograft tissues: characterization, simulation, and performance. Cardiovascular Engineering and Technology, 7, pp. 309-351. (doi: 10.1007/s13239-016-0276-8)

Esmaeili, A., Javili, A., Steinmann, P. (2016) Coherent energetic interfaces accounting for in-plane degradation. International Journal of Fracture, 202, pp. 135-165. (doi: 10.1007/s10704-016-0160-4)

Athanasiadis, I., Wheeler, S., Grassl, P. (2016) Network modelling of the influence of swelling on the transport behaviour of bentonite. Geosciences, 6, (doi: 10.3390/geosciences6040055)

Pivovarov, D., Steinmann, P. (2016) On stochastic FEM based computational homogenization of magneto-active heterogeneous materials with random microstructure. Computational Mechanics, 58, pp. 981-1002. (doi: 10.1007/s00466-016-1329-4)

Mukhopadhyay, T., Mahata, A., Dey, S., Adhikari, S. (2016) Probabilistic analysis and design of HCP nanowires: an efficient surrogate based molecular dynamics simulation approach. Journal of Materials Science and Technology, 32, pp. 1345-1351. (doi: 10.1016/j.jmst.2016.07.019)

López Jiménez, F., Upadhyaya, P., Liljenhjerte, J., Reis, P.M., Kumar, S. (2016) Soft optical composites for tunable transmittance. Extreme Mechanics Letters, 9, pp. 297-303. (doi: 10.1016/j.eml.2016.09.003)

McBride, A., Bargmann, S., Pond, D., Limbert, G. (2016) Thermoelastic modelling of the skin at finite deformations. Journal of Thermal Biology, 62, pp. 201-209. (doi: 10.1016/j.jtherbio.2016.06.017)

Dey, S., Mukhopadhyay, T., Sahu, S. K., Adhikari, S. (2016) Effect of cutout on stochastic natural frequency of composite curved panels. Composites Part B: Engineering, 105, pp. 188-202. (doi: 10.1016/j.compositesb.2016.08.028)

Brands, B., Mergheim, J., Steinmann, P. (2016) Reduced-order modelling for linear heat conduction with parametrised moving heat sources. GAMM Mitteilungen, 39, pp. 170-188. (doi: 10.1002/gamm.201610011)

Lee, C. H., Gil, A. J., Greto, G., Kulasegaram, S., Bonet, J. (2016) A new Jameson–Schmidt–Turkel Smooth Particle Hydrodynamics algorithm for large strain explicit fast dynamics. Computer Methods in Applied Mechanics and Engineering, 311, pp. 71-111. (doi: 10.1016/j.cma.2016.07.033)

Zhou, X.-Y., Gosling, P.D., Ullah, Z., Kaczmarczyk, Ł., Pearce, C.J. (2016) Exploiting the benefits of multi-scale analysis in reliability analysis for composite structures. Composite Structures, 155, pp. 197-212. (doi: 10.1016/j.compstruct.2016.08.015)

Wakeni, M.F., Reddy, B.D., McBride, A.T. (2016) A thermodynamically consistent formulation of generalized thermoelasticity at finite deformations. International Journal of Engineering Science, 108, pp. 1-8. (doi: 10.1016/j.ijengsci.2016.08.008)

Maldonado, S., Creed, M. J., Borthwick, A. G. L. (2016) Bed-slope-related diffusion of an erodible hump. CRC Press

Mukhopadhyay, T., Adhikari, S. (2016) Free-vibration analysis of sandwich panels with randomly irregular honeycomb core. Journal of Engineering Mechanics, 142, (doi: 10.1061/(ASCE)EM.1943-7889.0001153)

Menzel, A., Steinmann, P. (2016) Preface of the guest editors. GAMM Mitteilungen, 39, pp. 113. (doi: 10.1002/gamm.201610008)

Steinmann, P. (2016) Preface of the outgoing editor. GAMM Mitteilungen, 39, pp. 112. (doi: 10.1002/gamm.201610007)

King, D., McGinty, S. (2016) Assessing the potential of mathematical modelling in designing drug-releasing orthopaedic implants. Journal of Controlled Release, 239, pp. 49-61. (doi: 10.1016/j.jconrel.2016.08.009)

Ortigosa, R., Gil, A. J., Lee, C. H. (2016) A computational framework for large strain nearly and truly incompressible electromechanics based on convex multi-variable strain energies. Computer Methods in Applied Mechanics and Engineering, 310, pp. 297-334. (doi: 10.1016/j.cma.2016.06.025)

Kaessmair, S., Steinmann, P. (2016) Comparative computational analysis of the Cahn-Hilliard equation with emphasis on C1-continuous methods. Journal of Computational Physics, 322, pp. 783-803. (doi: 10.1016/j.jcp.2016.07.005)

Chandra, Y., Scarpa, F., Adhikari, S., Zhang, J., Saavedra Flores, E. I., Peng, H.-X. (2016) Pullout strength of graphene and carbon nanotube/epoxy composites. Composites Part B: Engineering, 102, pp. 1-8. (doi: 10.1016/j.compositesb.2016.06.070)

Weickenmeier, J., de Rooij, R., Budday, S., Steinmann, P., Ovaert, T.C., Kuhl, E. (2016) Brain stiffness increases with myelin content. Acta Biomaterialia, 42, pp. 265-272. (doi: 10.1016/j.actbio.2016.07.040)

Garcia-Macias, E., Castro-Triguero, R., Friswell, M. I., Adhikari, S., Saez, A. (2016) Metamodel-based approach for stochastic free vibration analysis of functionally graded carbon nanotube reinforced plates. Composite Structures, 152, pp. 183-198. (doi: 10.1016/j.compstruct.2016.05.019)

Xenos, D., Grassl, P. (2016) Modelling the failure of reinforced concrete with nonlocal and crack band approaches using the damage-plasticity model CDPM2. Finite Elements in Analysis and Design, 117-8, pp. 11-20. (doi: 10.1016/j.finel.2016.04.002)

Athanasiadis, I., Wheeler, S. J., Grassl, P. (2016) Network Modelling of Fluid Retention Behaviour in Unsaturated Soils. (doi: 10.1051/e3sconf/20160911016)

Pearce, C., Kaczmarczyk, L., Ullah, Z. (2016) Nonlinear Micro-Mechanical Response of Fibre-Reinforced Polymer Composites Including Matrix Damage and Fibre-Matrix Decohesion.

Chandra, Y., Saavedra Flores, E. I., Scarpa, F., Adhikari, S. (2016) Buckling of hybrid nanocomposites with embedded graphene and carbon nanotubes. Physica E: Low-Dimensional Systems and Nanostructures, 83, pp. 434-441. (doi: 10.1016/j.physe.2016.01.021)

Madinei, H., Haddad Khodaparast, H., Friswell, M.I., Adhikari, S. (2016) Improving Performance of MEMS Piezoelectric Harvesters in the Presence of Manufacturing Uncertainties.

Grassl, P., Bolander, J. (2016) Three-dimensional network model for coupling of fracture and mass transport in quasi-brittle geomaterials. Materials, 9, (doi: 10.3390/ma9090782)

Aurich, J. C., Zimmermann, M., Schindler, S., Steinmann, P. (2016) Turning of aluminum metal matrix composites: influence of the reinforcement and the cutting condition on the surface layer of the workpiece. Advances in Manufacturing, 4, pp. 225-236. (doi: 10.1007/s40436-016-0152-7)

Aggarwal, A., Pouch, A. M., Lai, E., Lesicko, J., Yushkevich, P. A., Gorman III, J. H., Gorman, R. C., Sacks, M. S. (2016) In-vivo heterogeneous functional and residual strains in human aortic valve leaflets. Journal of Biomechanics, 49, pp. 2481-2490. (doi: 10.1016/j.jbiomech.2016.04.038)

Esmaeili, A., Javili, A., Steinmann, P. (2016) A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces. International Journal of Solids and Structures, 92-93, pp. 29-44. (doi: 10.1016/j.ijsolstr.2016.04.035)

Aggarwal, A., Sacks, M. S. (2016) An inverse modeling approach for semilunar heart valve leaflet mechanics: exploitation of tissue structure. Biomechanics and Modeling in Mechanobiology, 15, pp. 909-932. (doi: 10.1007/s10237-015-0732-7)

Mukhopadhyay, T., Adhikari, S. (2016) Equivalent in-plane elastic properties of irregular honeycombs: an analytical approach. International Journal of Solids and Structures, 91, pp. 169-184. (doi: 10.1016/j.ijsolstr.2015.12.006)

Barbera, D., Chen, H., Liu, Y. (2016) On creep fatigue interaction of components at elevated temperature. Journal of Pressure Vessel Technology, 138, (doi: 10.1115/1.4032278)

Jacquelin, E., Adhikari, S., Friswell, M. I., Sinou, J. -J. (2016) Role of roots of orthogonal polynomials in the dynamic response of stochastic systems. Journal of Engineering Mechanics, 142, (doi: 10.1061/(ASCE)EM.1943-7889.0001102)

Ullah, Z., Kaczmarczyk, L., Pearce, C. (2016) Multi-Scale Computational Homogenisation of the Fibre-Reinforced Polymer Composites Including Matrix Damage and Fibre-Matrix Decohesion.

Nguyen, L. T. K. (2016) Soliton solution of good Boussinesq equation. Vietnam Journal of Mathematics, 44, pp. 375-385. (doi: 10.1007/s10013-015-0157-8)

Al-Budairi, H., Gao, Z., Steel, A., Wheeler, S., Davies, T. (2016) Modelling and Optimising of a Light-Weight Rockfall Catch Fence System.

Wakeni, M. F., Reddy, D., McBride, A. T. (2016) An unconditionally stable algorithm for generalized thermoelasticity based on operator-splitting and time-discontinuous Galerkin finite element methods. Computer Methods in Applied Mechanics and Engineering, 306, pp. 427-451. (doi: 10.1016/j.cma.2016.03.040)

Nguyen, L. T. K. (2016) A numerical scheme and some theoretical aspects for the cylindrically and spherically symmetric sine-Gordon equations. Communications in Nonlinear Science and Numerical Simulation, 36, pp. 402-418. (doi: 10.1016/j.cnsns.2015.12.008)

Jacquelin, E., Friswell, M. I., Adhikari, S., Dessombz, O., Sinou, J. -J. (2016) Polynomial chaos expansion with random and fuzzy variables. Mechanical Systems and Signal Processing, 75, pp. 41-56. (doi: 10.1016/j.ymssp.2015.12.001)

Adhikari, S. (2016) Boron nitride nanotubes as bionanosensors. William Andrew

Adhikari, S., Friswell, M.I., Litak, G., Khodaparast, H. H. (2016) Design and analysis of vibration energy harvesters based on peak response statistics. Smart Materials and Structures, 25, (doi: 10.1088/0964-1726/25/6/065009)

Wilhelm, P., Steinmann, P., Rudolph, J. (2016) Effects of boiling water reactor medium on the fatigue life of austenitic stainless steels. Journal of Pressure Vessel Technology, 138, (doi: 10.1115/1.4032651)

Mehnert, M., Hossain, M., Steinmann, P. (2016) On nonlinear thermo-electro-elasticity. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 472, (doi: 10.1098/rspa.2016.0170)

De Lorenzis, L., McBride, A., Reddy, B.D. (2016) Phase-field modelling of fracture in single crystal plasticity. GAMM-Mitteilungen, 39, pp. 7-34. (doi: 10.1002/gamm.201610002)

Al-Budairi, H., Gao, Z. (2016) A Robust and Cost-Efficient Design of Lightweight Rockfall Catch Fences for Railways.

Pfaller, S., Possart, G., Steinmann, P., Rahimi, M., Müller-Plathe, F., Böhm, M. C. (2016) Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics-finite-element simulation framework. Physical Review E, 93, (doi: 10.1103/PhysRevE.93.052505)

Dey, S., Naskar, S., Mukhopadhyay, T., Gohs, U., Spickenheuer, A., Bittrich, L., Sriramula, S., Adhikari, S., Heinrich, G. (2016) Uncertain natural frequency analysis of composite plates including effect of noise - a polynomial neural network approach. Composite Structures, 143, pp. 130-142. (doi: 10.1016/j.compstruct.2016.02.007)

Davydov, D., Young, T. D., Steinmann, P. (2016) On the adaptive finite element analysis of the Kohn-Sham equations: Methods, algorithms, and implementation. International Journal for Numerical Methods in Engineering, 106, pp. 863-863-888. (doi: 10.1002/nme.5140)

Zhou, X.-Y., Pearce, C. J., Gosling, P. D., Kaczmarczyk, L., Ullah, Z. (2016) Multi-Scale Finite Element Based Durability and Reliability Analysis of Laminated Fibre Reinforced Composites for Civil Engineering Applications. (doi: 10.2749/222137816819258609)

Madinei, H., Haddad Khodaparast, H., Adhikari, S., Friswell, M.I. (2016) A hybrid piezoelectric and electrostatic vibration energy harvester. Springer

Boulkaibet, I., Marwala, T., Friswell, M.I., Adhikari, S. (2016) An adaptive markov Chain monte carlo method for Bayesian finite element model updating. Springer

Friswell, M. I., Chandrashaker, A., Adhikari, S. (2016) An energy measure for mode localization. Springer

Havlasek, P., Grassl, P., Jirásek, M. (2016) Analysis of size effect on strength of quasi-brittle materials using integral-type nonlocal models. Engineering Fracture Mechanics, 157, pp. 72-85. (doi: 10.1016/j.engfracmech.2016.02.029)

Wang, J., Steinmann, P. (2016) On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. I: Theoretical formulation. Continuum Mechanics and Thermodynamics, 28, pp. 669–-698. (doi: 10.1007/s00161-013-0319-4)

Wang, J., Steinmann, P. (2016) On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. II: numerical algorithm. Continuum Mechanics and Thermodynamics, 28, pp. 669-698. (doi: 10.1007/s00161-014-0403-4)

Wang, J., Steinmann, P. (2016) On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape-memory alloy sample-III: Magneto-mechanical behaviors. Continuum Mechanics and Thermodynamics, 28, pp. 885-913. (doi: 10.1007/s00161-015-0452-3)

Litak, G., Friswell, M. I., Adhikari, S. (2016) Regular and chaotic vibration in a piezoelectric energy harvester. Meccanica, 51, pp. 1017-1025. (doi: 10.1007/s11012-015-0287-9)

López Jiménez, F., Kumar, S., Reis, P. M. (2016) Soft color composites with tunable optical transmittance. Advanced Optical Materials, (doi: 10.1002/adom.201500617)

Adhikari, S., Khodaparast, H. H. (2016) Mass and Rotary Inertia Sensing from Vibrating Cantilever Nanobeams. (doi: 10.1117/12.2222116)

Dey, S., Mukhopadhyay, T., Spickenheuer, A., Adhikari, S., Heinrich, G. (2016) Bottom up surrogate based approach for stochastic frequency response analysis of laminated composite plates. Composite Structures, 140, pp. 712-727. (doi: 10.1016/j.compstruct.2016.01.039)

Mukhopadhyay, T., Naskar, S., Dey, S., Adhikari, S. (2016) On quantifying the effect of noise in surrogate based stochastic free vibration analysis of laminated composite shallow shells. Composite Structures, 140, pp. 798-805. (doi: 10.1016/j.compstruct.2015.12.037)

Khodaparast, H. H., Madinei, H., Friswell, M. I., Adhikari, S. (2016) Vibration Suppression in MEMS Devices Using Electrostatic Forces. (doi: 10.1117/12.2222069)

Ghosh, A., Kumar Guha, S. (2016) Linear stability analysis of finite hydrodynamic journal bearing under turbulent lubrication with coupled-stress fluid. Industrial Lubrication and Tribology, 68, pp. 386-391. (doi: 10.1108/ILT-07-2015-0094)

Friederich, J., Pfaller, S., Steinmann, P. (2016) A web-based tool for the interactive visualization of stresses in an infinite plate with an elliptical hole under simple tension: www.ltm.fau.de/plate. Archive of Applied Mechanics, 86, pp. 617-625. (doi: 10.1007/s00419-015-1049-9)

Mukhopadhyay, T., Adhikari, S. (2016) Effective in-plane elastic properties of auxetic honeycombs with spatial irregularity. Mechanics of Materials, 95, pp. 204-222. (doi: 10.1016/j.mechmat.2016.01.009)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Adhikari, S. (2016) Fuzzy uncertainty propagation in composites using Gram-Schmidt polynomial chaos expansion. Applied Mathematical Modelling, 40, pp. 4412-4428. (doi: 10.1016/j.apm.2015.11.038)

Syta, A., Litak, G., Friswell, M. I., Adhikari, S. (2016) Multiple solutions and corresponding power output of a nonlinear bistable piezoelectric energy harvester. European Physical Journal B, 89, (doi: 10.1140/epjb/e2016-60699-0)

Schmitt, O., Friederich, J., Riehl, S., Steinmann, P. (2016) On the formulation and implementation of geometric and manufacturing constraints in node-based shape optimization. Structural and Multidisciplinary Optimization, 53, pp. 881-892. (doi: 10.1007/s00158-015-1359-0)

Mcginty, S., Pontrelli, G. (2016) On the role of specific drug binding in modelling arterial eluting stents. Journal of Mathematical Chemistry, 54, pp. 967-976. (doi: 10.1007/s10910-016-0618-7)

Chandrashaker, A., Adhikari, S., Friswell, M. I. (2016) Quantification of vibration localization in periodic structures. Journal of Vibration and Acoustics, 138, (doi: 10.1115/1.4032032)

Adhikari, S., Pascual, B. (2016) The 'damping effect' in the dynamic response of stochastic oscillators. Probabilistic Engineering Mechanics, 44, pp. 2-17. (doi: 10.1016/j.probengmech.2015.09.017)

Zhou, X.-Y., Gosling, P.D., Ullah, Z., Kaczmarczyk, L., Pearce, C. (2016) Multi-Scale Finite Element Based Time-Dependent Reliability Analysis for Laminated Fibre Reinforced Composites.

Ullah, Z., Kaczmarczyk, L., Pearce, C. (2016) Nonlinear Micro-Mechanical Response of the Fibre-Reinforced Polymer Composites Including Matrix Damage and Fibre-Matrix Decohesion.

Kaczmarczyk, L., Ullah, Z., Pearce, C. (2016) Prism Solid-Shell with Heterogonous and Hierarchical Approximation Basis.

Zhang, J., Wang, C., Adhikari, S. (2016) Reply to Comment on 'Molecular structure-dependent deformations in boron nitride nanostructures subject to an electrical field' Journal of Physics D: Applied Physics, 49, (doi: 10.1088/0022-3727/49/10/108002)

Gil, A. J., Lee, C. H., Bonet, J., Ortigosa, R. (2016) A first order hyperbolic framework for large strain computational solid dynamics. Part II: total Lagrangian compressible, nearly incompressible and truly incompressible elasticity. Computer Methods in Applied Mechanics and Engineering, 300, pp. 146-181. (doi: 10.1016/j.cma.2015.11.010)

Mahata, A., Mukhopadhyay, T., Adhikari, S. (2016) A polynomial chaos expansion based molecular dynamics study for probabilistic strength analysis of nano-twinned copper. Materials Research Express, 3, (doi: 10.1088/2053-1591/3/3/036501)

Barbera, D., Chen, H., Liu, Y. (2016) Creep-fatigue behaviour of aluminum alloy-based metal matrix composite. International Journal of Pressure Vessels and Piping, 139-40, pp. 159-172. (doi: 10.1016/j.ijpvp.2016.02.004)

Cui, Y., Kundalwal, S.I., Kumar, S. (2016) Gas barrier performance of graphene/polymer nanocomposites. Carbon, 98, pp. 313-333. (doi: 10.1016/j.carbon.2015.11.018)

Zhou, X.-Y., Gosling, P.D., Pearce, C.J., Kaczmarczyk, L., Ullah, Z. (2016) Perturbation-based stochastic multi-scale computational homogenization method for the determination of the effective properties of composite materials with random properties. Computer Methods in Applied Mechanics and Engineering, 300, pp. 84-105. (doi: 10.1016/j.cma.2015.10.020)

Bayerschen, E., McBride, A.T., Reddy, B.D., Böhlke, T. (2016) Review on slip transmission criteria in experiments and crystal plasticity models. Journal of Materials Science, 51, pp. 2243-2258. (doi: 10.1007/s10853-015-9553-4)

Dey, S., Mukhopadhyay, T., Spickenheuer, A., Gohs, U., Adhikari, S. (2016) Uncertainty quantification in natural frequency of composite plates - an artificial neural network based approach. Advanced Composites Letters, 25, pp. 43-48. (doi: 10.1177/096369351602500203)

Landkammer, P., Schneider, T., Schulte, R., Steinmann, P., Merklein, M. (2016) A non-invasive form finding method with application to metal forming. Production Engineering, 10, pp. 93-102. (doi: 10.1007/s11740-016-0659-6)

Landkammer, P., Steinmann, P. (2016) A non-invasive heuristic approach to shape optimization in forming. Computational Mechanics, 57, pp. 169-191. (doi: 10.1007/s00466-015-1226-2)

Garbuzov, F.E., Samsonov, A.M., Semenov, A.A., Shvarts, A.G. (2016) Determination of third-order elastic moduli via parameters of bulk strain solitons. Technical Physics Letters, 42, pp. 121-123. (doi: 10.1134/S1063785016020073)

Aurich, J. C., Zimmermann, M., Schindler, S., Steinmann, P. (2016) Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites. International Journal of Advanced Manufacturing Technology, 82, pp. 1317-1334. (doi: 10.1007/s00170-015-7444-0)

McHugh, P., Barakat, A., Mcginty, S. (2016) Medical Stents: State of the Art and Future Directions [Guest Editors] Annals of Biomedical Engineering, 44, pp. 274-275. (doi: 10.1007/s10439-015-1526-x)

McKittrick, C.M., Kennedy, S., Oldroyd, K.G., Mcginty, S., McCormick, C. (2016) Modelling the impact of atherosclerosis on drug release and distribution from coronary stents. Annals of Biomedical Engineering, 44, pp. 477-487. (doi: 10.1007/s10439-015-1456-7)

Aggarwal, A., May, E. R., Brooks, C. L., Klug, W. S. (2016) Nonuniform elastic properties of macromolecules and effect of prestrain on their continuum nature. Physical Review E, 93, (doi: 10.1103/physreve.93.012417)

Pal, G., Kumar, S. (2016) Multiscale modeling of effective electrical conductivity of short carbon fiber-carbon nanotube-polymer matrix hybrid composites. Materials and Design, 89, pp. 129-136. (doi: 10.1016/j.matdes.2015.09.105)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Adhikari, S. (2016) A response surface modelling approach for resonance driven reliability based optimization of composite shells. Periodica Polytechnica Civil Engineering, 60, pp. 103-111. (doi: 10.3311/PPci.8073)

McBride, A.T., Gottschalk, D., Reddy, B.D., Wriggers, P., Javili, A. (2016) Computational and theoretical aspects of a grain-boundary model at finite deformations. Technische Mechanik, 36, pp. 92-109.

Gottschalk, D., McBride, A., Reddy, B.D., Javili, A., Wriggers, P., Hirschberger, C.B. (2016) Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation. Computational Materials Science, 111, pp. 443-459. (doi: 10.1016/j.commatsci.2015.09.048)

Pal, G., Kumar, S. (2016) Modeling of carbon nanotubes and carbon nanotube–polymer composites. Progress in Aerospace Sciences, 80, pp. 33-58. (doi: 10.1016/j.paerosci.2015.12.001)

Pivovarov, D., Steinmann, P. (2016) Modified SFEM for computational homogenization of heterogeneous materials with microstructural geometric uncertainties. Computational Mechanics, 57, pp. 123-147. (doi: 10.1007/s00466-015-1224-4)

Zhao, J., Gao, Z. (2016) Unified anisotropic elastoplastic model for sand. Journal of Engineering Mechanics, 142, (doi: 10.1061/(ASCE)EM.1943-7889.0000962)

Malaji, P.V., Ali, S.F., Adhikari, S., Friswell, M.I. (2016) Analysis of harvesting energy from mistuned multiple harvesters with and without coupling. Procedia Engineering, 144, pp. 621-628. (doi: 10.1016/j.proeng.2016.05.052)

Saeb, S., Steinmann, P., Javili, A. (2016) Aspects of computational homogenization at finite deformations: A unifying review from Reuss' to Voigt's Bound. Applied Mechanics Reviews, 68, (doi: 10.1115/1.4034024)

Landkammer, P., Steinmann, P. (2016) Case Study on the Influence of Kinematic Hardening within a Parameter-free and Non-invasive Form Finding Approach. (doi: 10.1051/matecconf/20168011007)

Zimmermann, M., Schindler, S., Steinmann, P., Aurich, J. C. (2016) Compensation of thermo-mechanically induced workpiece and tool deformations during dry turning. Procedia CIRP, 46, pp. 31-34. (doi: 10.1016/j.procir.2016.03.210)

Barbera, D., Chen, H. F., Liu, Y. H. (2016) Creep fatigue life assessment of a pipe intersection with dissimilar material joint by linear matching method. Applied Mechanics and Materials, 853, pp. 366-371. (doi: 10.4028/www.scientific.net/AMM.853.366)

Sengers, B. G., McGinty, S., Nouri, F. Z., Argungu, M., Hawkins, E., Hadji, A., Weber, A., Taylor, A., Sepp, A. (2016) Modelling bispecific monoclonal antibody interaction with two cell membrane targets indicates the importance of surface diffusion. mAbs, 8, pp. 905-916. (doi: 10.1080/19420862.2016.1178437)

Jacquelin, E., Friswell, M.I., Adhikari, S., Dessombz, O., Sinou, J.-J. (2016) Polynomial Chaos Expansion With Fuzzy and Random Uncertainties in Dynamical Systems.

Martinez-Ayuso, G., Friswell, M.I., Adhikari, S., Haddad Khodaparast, H., Featherston, C.A. (2016) Porous Piezoelectric Materials for Energy Harvesting.

Enders, F., Steinmann, P. (2016) Size effects of 109° domain walls in rhombohedral barium titanate single crystals - A molecular statics analysis. Journal of Applied Physics, 119, (doi: 10.1063/1.4939600)

Schmidt, U., Steinmann, P., Mergheim, J. (2016) Two-scale elastic parameter identification from noisy macroscopic data. Archive of Applied Mechanics, 86, pp. 303-320. (doi: 10.1007/s00419-015-1096-2)

Nguyen, L. T. K. (2016) Wronskian formulation and Ansatz method for bad Boussinesq equation. Vietnam Journal of Mathematics, 44, pp. 449-462. (doi: 10.1007/s10013-015-0145-z)

Beaverstock, C. S., Friswell, M. I., Adhikari, S., Richardson, T. S., Du Bois, J. L. (2015) Automatic mode tracking for flight dynamic analysis using a spanning algorithm. Aerospace Science and Technology, 47, pp. 54-67. (doi: 10.1016/j.ast.2015.08.013)

Dey, S., Sarkar, S., Das, A., Karmakar, A., Adhikari, S. (2015) Effect of twist and rotation on vibration of functionally graded conical shells. International Journal of Mechanics and Materials in Design, 11, pp. 425-437. (doi: 10.1007/s10999-014-9266-x)

Barbera, D., Laurenzi, S. (2015) Nonlinear buckling and folding analysis of a storable tubular ultrathin boom for nanosatellites. Composite Structures, 132, pp. 226-238. (doi: 10.1016/j.compstruct.2015.05.024)

Mcginty, S., Pontrelli, G. (2015) A general model of coupled drug release and tissue absorption for drug delivery devices. Journal of Controlled Release, 217, pp. 327-336. (doi: 10.1016/j.jconrel.2015.09.025)

Jacquelin, E., Adhikari, S., Sinou, J. -J., Friswell, M. I. (2015) Polynomial chaos expansion in structural dynamics: accelerating the convergence of the first two statistical moment sequences. Journal of Sound and Vibration, 356, pp. 144-154. (doi: 10.1016/j.jsv.2015.06.039)

Zhou, X.-Y., Gosling, P. D., Ullah, Z., Kaczmarczyk, L., Pearce, C. (2015) Probabilistic Analysis of Strength Degradation of Fibre Reinforced Composite Structural Components Under Hygrothermal Environments.

Aguirre, M., Gil, A. J., Bonet, J., Lee, C. H. (2015) An upwind vertex centred finite volume solver for Lagrangian solid dynamics. Journal of Computational Physics, 300, pp. 387-422. (doi: 10.1016/j.jcp.2015.07.029)

Davydov, D., Steinmann, P. (2015) Reviewing the roots of continuum formulations in molecular systems. Part III: Stresses, couple stresses, heat fluxes. Mathematics and Mechanics of Solids, 20, pp. 1153-1170. (doi: 10.1177/1081286513516480)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Kerfriden, P., Adhikari, S. (2015) Rotational and ply-level uncertainty in response of composite shallow conical shells. Composite Structures, 131, pp. 594-605. (doi: 10.1016/j.compstruct.2015.06.011)

Madinei, H., Khodaparast, H. H., Adhikari, S., Friswell, M. I., Fazeli, M. (2015) Adaptive tuned piezoelectric MEMS vibration energy harvester using an electrostatic device. European Physical Journal: Special Topics, 224, pp. 2703-2717. (doi: 10.1140/epjst/e2015-02584-6)

Barbera, D., Chen, H. (2015) Creep rupture assessment by a robust creep data interpolation using the Linear Matching Method. European Journal of Mechanics - A/Solids, 54, pp. 267-279. (doi: 10.1016/j.euromechsol.2015.07.003)

Mcginty, S., Wheel, M., McKee, S., McCormick, C. (2015) Does anisotropy promote spatial uniformity of stent-delivered drug distribution in arterial tissue? International Journal of Heat and Mass Transfer, 90, pp. 266-279. (doi: 10.1016/j.ijheatmasstransfer.2015.06.061)

Schmidt, U., Mergheim, J., Steinmann, P. (2015) Identification of elastoplastic microscopic material parameters within a homogenization scheme. International Journal for Numerical Methods in Engineering, 104, pp. 391-407. (doi: 10.1002/nme.4933)

Karličić, D., Kozić, P., Murmu, T., Adhikari, S. (2015) Vibration insight of a nonlocal viscoelastic coupled multi-nanorod system. European Journal of Mechanics - A/Solids, 54, pp. 132-145. (doi: 10.1016/j.euromechsol.2015.06.014)

Samsonov, A.M., Dreiden, G.V., Semenova, I.V., Shvartz, A.G. (2015) Bulk Solitary Waves in Elastic Solids. (doi: 10.1063/1.4934283)

Samsonov, A.M., Dreiden, G.V., Semenova, I.V., Shvartz, A.G. (2015) Bulk Strain Solitons in Rods, Plates and Shells. (doi: 10.1063/1.4934457)

Shvartz, A., Samsonov, A., Dreiden, G., Semenova, I. (2015) Evolution of Bulk Strain Solitons in Cylindrical Inhomogeneous Shells. (doi: 10.1063/1.4934451)

Grégoire, D., Verdon, L., Lefort, V., Grassl, P., Saliba, J., Regoin, J.-P., Loukili, A., Pijaudier-Cabot, G. (2015) Mesoscale analysis of failure in quasi-brittle materials: comparison between lattice model and acoustic emission data. International Journal for Numerical and Analytical Methods in Geomechanics, 39, pp. 1639-1664. (doi: 10.1002/nag.2363)

Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015) Interface properties influence the effective dielectric constant of composites. Philosophical Magazine, 95, pp. 3402-3412. (doi: 10.1080/14786435.2015.1051155)

Budday, S., Steinmann, P., Kuhl, E. (2015) Secondary instabilities modulate cortical complexity in the mammalian brain. Philosophical Magazine, 95, pp. 3244-3256. (doi: 10.1080/14786435.2015.1024184)

Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015) Multiscale modelling for composites with energetic interfaces at the micro- or nanoscale. Mathematics and Mechanics of Solids, 20, pp. 1130-1145. (doi: 10.1177/1081286513516122)

Fillep, S., Mergheim, J., Steinmann, P. (2015) Computational Homogenization of One-dimensional Textile Structures.

Schindler, S., Zimmermann, M., Aurich, J. C., Steinmann, P. (2015) Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning. Production Engineering, 9, pp. 473-485. (doi: 10.1007/s11740-015-0629-4)

Upadhyaya, P., Kumar, S. (2015) Micromechanics of stress transfer through the interphase in fiber-reinforced composites. Mechanics of Materials, 89, pp. 190-201. (doi: 10.1016/j.mechmat.2015.06.012)

Dey, S., Mukhopadhyay, T., Sahu, S. K., Li, G., Rabitz, H., Adhikari, S. (2015) Thermal uncertainty quantification in frequency responses of laminated composite plates. Composites Part B: Engineering, 80, pp. 186-197. (doi: 10.1016/j.compositesb.2015.06.006)

Gao, Z., Zhao, J. (2015) Cyclic Loading and Fabric Evolution in Sand: A Constitutive Investigation.

Javili, A., Chatzigeorgiou, G., McBride, A., Steinmann, P., Linder, C. (2015) Computational homogenization of nano-materials accounting for size effects via surface elasticity. GAMM-Mitteilungen, 38, pp. 285-312. (doi: 10.1002/gamm.201510016)

Xenos, D., Grégoire, D., Morel, S., Grassl, P. (2015) Calibration of nonlocal models for tensile fracture in quasi-brittle heterogeneous materials. Journal of the Mechanics and Physics of Solids, 82, pp. 48-60. (doi: 10.1016/j.jmps.2015.05.019)

Hossain, M., Saxena, P., Steinmann, P. (2015) Modelling the curing process in magneto-sensitive polymers: rate-dependence and shrinkage. International Journal of Non-Linear Mechanics, 74, pp. 108-121. (doi: 10.1016/j.ijnonlinmec.2015.04.008)

Mukhopadhyay, T., Dey, T. K., Chowdhury, R., Chakrabarti, A., Adhikari, S. (2015) Optimum design of FRP bridge deck: an efficient RS-HDMR based approach. Structural and Multidisciplinary Optimization, 52, pp. 459-477. (doi: 10.1007/s00158-015-1251-y)

Budday, S., Steinmann, P., Goriely, A., Kuhl, E. (2015) Size and curvature regulate pattern selection in the mammalian brain. Extreme Mechanics Letters, 4, pp. 193-198. (doi: 10.1016/j.eml.2015.07.004)

Chatzigeorgiou, G., Javili, A., Steinmann, P. (2015) Surface magnetoelasticity theory. Archive of Applied Mechanics, 85, pp. 1265-1288. (doi: 10.1007/s00419-014-0938-7)

Gao, Z., Zhao, J. (2015) Constitutive modeling of anisotropic sand behavior in monotonic and cyclic loading. Journal of Engineering Mechanics, 141, (doi: 10.1061/(ASCE)EM.1943-7889.0000907)

Gao, Z. (2015) Discussion of ‘experimental investigation of shear strength of sands with inherent fabric anisotropy’ by Tong et al. (doi:10.1007/s11440-014-0303-6) Acta Geotechnica, 10, pp. 547-550. (doi: 10.1007/s11440-015-0383-y)

Adhikari, S., Gilchrist, D., Murmu, T., McCarthy, M. A. (2015) Non local normal modes in nanoscale dynamical systems. Mechanical Systems and Signal Processing, 60-61, pp. 583-603. (doi: 10.1016/j.ymssp.2014.12.004)

Dey, S., Mukhopadhyay, T., Khodaparast, H. H., Adhikari, S. (2015) Stochastic natural frequency of composite conical shells. Acta Mechanica, 226, pp. 2537-2553. (doi: 10.1007/s00707-015-1316-4)

Budday, S., Steinmann, P., Kuhl, E. (2015) Physical biology of human brain development. Frontiers in Cellular Neuroscience, 9, (doi: 10.3389/fncel.2015.00257)

Arany, L., Bhattacharya, S., Adhikari, S., Hogan, S. J., Macdonald, J. H. G. (2015) An analytical model to predict the natural frequency of offshore wind turbines on three-spring flexible foundations using two different beam models. Soil Dynamics and Earthquake Engineering, 74, pp. 40-45. (doi: 10.1016/j.soildyn.2015.03.007)

Wilhelm, P., Steinmann, P., Rudolph, J. (2015) Fatigue Strain-life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments. (doi: 10.1115/PVP2015-45011)

Ullah, Z., Kaczmarczyk, L., Pearce, C. (2015) Hierarchical Finite Element Based Multiscale Computational Homogenisation of Coupled Hygro-Mechanical Analysis for Fibre-Reinforced Polymers.

Budday, S., Nay, R., de Rooij, R., Steinmann, P., Wyrobek, T., Ovaert, T. C., Kuhl, E. (2015) Mechanical properties of gray and white matter brain tissue by indentation. Journal of the Mechanical Behavior of Biomedical Materials, 46, pp. 318-330. (doi: 10.1016/j.jmbbm.2015.02.024)

Vijayan, K., Friswell, M. I., Haddad Khodaparast, H., Adhikari, S. (2015) Non-linear energy harvesting from coupled impacting beams. International Journal of Mechanical Sciences, 96-97, pp. 101-109. (doi: 10.1016/j.ijmecsci.2015.03.001)

Karličić, D., Cajić, M., Murmu, T., Kozić, P., Adhikari, S. (2015) Nonlocal effects on the longitudinal vibration of a complex multi-nanorod system subjected to the transverse magnetic field. Meccanica, 50, pp. 1605-1621. (doi: 10.1007/s11012-015-0111-6)

Karličić, D., Kozić, P., Adhikari, S., Cajic, M., Murmu, T., Lazarević, M. (2015) Nonlocal mass-nanosensor model based on the damped vibration of single-layer graphene sheet influenced by in-plane magnetic field. International Journal of Mechanical Sciences, 96-97, pp. 132-142. (doi: 10.1016/j.ijmecsci.2015.03.014)

Mcginty, S., McKee, S., McCormick, C., Wheel, M. (2015) Release mechanism and parameter estimation in drug-eluting stent systems: analytical solutions of drug release and tissue transport. Mathematical Medicine and Biology, 32, pp. 163-186. (doi: 10.1093/imammb/dqt025)

Le, K.C., Nguyen, L.T.K. (2015) Slope modulation of ring waves governed by two-dimensional sine-Gordon equation. Wave Motion, 55, pp. 84-88. (doi: 10.1016/j.wavemoti.2014.12.005)

Khalil, M., Sarkar, A., Adhikari, S., Poirel, D. (2015) The estimation of time-invariant parameters of noisy nonlinear oscillatory systems. Journal of Sound and Vibration, 344, pp. 81-100. (doi: 10.1016/j.jsv.2014.10.002)

Boulkaibet, I., Mthembu, L., Marwala, T., Friswell, M.I., Adhikari, S. (2015) Finite element model updating using an evolutionary Markov chain Monte Carlo algorithm. Springer

Mcginty, S., Vo, T. T.N., Meere, M., McKee, S., McCormick, C. (2015) Some design considerations for polymer-free drug-eluting stents: a mathematical approach. Acta Biomaterialia, 18, pp. 213-225. (doi: 10.1016/j.actbio.2015.02.006)

Friswell, M. I., Bilgen, O., Ali, S. F., Litak, G., Adhikari, S. (2015) The effect of noise on the response of a vertical cantilever beam energy harvester. ZAMM: Zeitschrift für Angewandte Mathematik und Mechanik, 95, pp. 433-443. (doi: 10.1002/zamm.201300183)

Riehl, S., Steinmann, P. (2015) A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm. Computer Methods in Applied Mechanics and Engineering, 287, pp. 1-30. (doi: 10.1016/j.cma.2015.01.007)

Endres, F., Steinmann, P. (2015) Molecular statics simulations of ferroelectric barium titanate in the rhombohedral phase. GAMM Mitteilungen, 38, pp. 132-146. (doi: 10.1002/gamm.201510007)

Wang, J., Steinmann, P., Rudolph, J., Willuweit, A. (2015) Simulation of creep and cyclic viscoplastic strains in high-Cr steel components based on a modified becker-hackenberg model. International Journal of Pressure Vessels and Piping, 128, pp. 36-47. (doi: 10.1016/j.ijpvp.2015.02.003)

Hossain, M., Vu, D. K., Steinmann, P. (2015) A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer. Archive of Applied Mechanics, 85, pp. 523-537. (doi: 10.1007/s00419-014-0928-9)

McBride, A., Bargmann, S., Reddy, B. D. (2015) A computational investigation of a model of single-crystal gradient thermoplasticity that accounts for the stored energy of cold work and thermal annealing. Computational Mechanics, 55, pp. 755-769. (doi: 10.1007/s00466-015-1134-5)

Perotti, L. E., Aggarwal, A., Rudnick, J., Bruinsma, R., Klug, W. S. (2015) Elasticity theory of the maturation of viral capsids. Journal of the Mechanics and Physics of Solids, 77, pp. 86-108. (doi: 10.1016/j.jmps.2015.01.006)

Aurich, J.C., Zimmermann, M., Steinmann, P., Schindler, S. (2015) Increasing manufacturing precision in turning,Fertigungsgenauigkeit beim Drehen steigern. VDI-Z Integrierte Produktion, 157, pp. 42-45.

Hossain, M., Saxena, P., Steinmann, P. (2015) Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials. International Journal of Solids and Structures, 58, pp. 257-269. (doi: 10.1016/j.ijsolstr.2015.01.010)

Nguyen, L.T.K. (2015) Modified homogeneous balance method: Applications and new solutions. Chaos, Solitons and Fractals, 73, pp. 148-155. (doi: 10.1016/j.chaos.2015.01.017)

Mcginty, S., Pontrelli, G. (2015) On the influence of solid–liquid mass transfer in the modelling of drug release from stents. Journal of Coupled Systems and Multiscale Dynamics, 3, pp. 47-56. (doi: 10.1166/jcsmd.2015.1064)

Jacquelin, E., Adhikari, S., Sinou, J. -J., Friswell, M. I. (2015) Polynomial chaos expansion and steady-state response of a class of random dynamical systems. Journal of Engineering Mechanics, 141, (doi: 10.1061/(ASCE)EM.1943-7889.0000856)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2015) Stochastic free vibration analysis of angle-ply composite plates - a RS-HDMR approach. Composite Structures, 122, pp. 526-536. (doi: 10.1016/j.compstruct.2014.09.057)

Landkammer, P., Loderer, A., Krebs, E., Sohngen, B., Steinmann, P., Hausotte, T., Kersting, P., Biermann, D., Willner, K. (2015) Experimental Verification of a Benchmark Forming Simulation. (doi: 10.4028/www.scientific.net/KEM.639.251)

Le, K.C., Nguyen, L.T.K. (2015) Amplitude modulation of water waves governed by Boussinesq’s equation. Nonlinear Dynamics, 81, pp. 659-666. (doi: 10.1007/s11071-015-2017-1)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2015) Stochastic free vibration analyses of composite shallow doubly curved shells - a Kriging model approach. Composites Part B: Engineering, 70, pp. 99-112. (doi: 10.1016/j.compositesb.2014.10.043)

Kundu, A., Adhikari, S., Friswell, M. I. (2015) Transient response analysis of randomly parametrized finite element systems based on approximate balanced reduction. Computer Methods in Applied Mechanics and Engineering, 285, pp. 542-570. (doi: 10.1016/j.cma.2014.11.007)

Fillep, S., Mergheim, J., Steinmann, P. (2015) Computational homogenization of rope-like technical textiles. Computational Mechanics, 55, pp. 577-590. (doi: 10.1007/s00466-015-1124-7)

Klinge, S., Steinmann, P. (2015) Inverse analysis for heterogeneous materials and its application to viscoelastic curing polymers. Computational Mechanics, 55, pp. 603-615. (doi: 10.1007/s00466-015-1126-5)

Saxena, P., Pelteret, J.-P., Steinmann, P. (2015) Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure. European Journal of Mechanics - A/Solids, 50, pp. 132-151. (doi: 10.1016/j.euromechsol.2014.10.005)

Pearce, C., Kaczmarczyk, L., Ullah, Z. (2015) Multiscale Computational Homogenisation to Predict the Long-Term Durability of Composite Structures.

Pearce, C., Zhou, X.-Y., Kaczmarczyk, L., Ullah, Z., Gosling, P.D. (2015) Perturbation-Based Stochastic Multiscale Computational Homogenization Method.

Saavedra Flores, E. I., Ajaj, R. M., Adhikari, S., Dayyani, I., Friswell, M. I., Castro-Triguero, R. (2015) Hyperelastic tension of graphene. Applied Physics Letters, 106, (doi: 10.1063/1.4908119)

Kamensky, D., Hsu, M.-C., Schillinger, D., Evans, J. A., Aggarwal, A., Bazilevs, Y., Sacks, M. S., Hughes, T. J.R. (2015) An immersogeometric variational framework for fluid–structure interaction: Application to bioprosthetic heart valves. Computer Methods in Applied Mechanics and Engineering, 284, pp. 1005-1053. (doi: 10.1016/j.cma.2014.10.040)

Endres, F., Steinmann, P. (2015) Molecular statics simulations of head to head and tail to tail nanodomains of rhombohedral barium titanate. Computational Materials Science, 97, pp. 20-25. (doi: 10.1016/j.commatsci.2014.10.001)

Boulkaibet, I., Mthembu, L., Marwala, T., Friswell, M. I., Adhikari, S. (2015) Finite element model updating using the shadow hybrid Monte Carlo technique. Mechanical Systems and Signal Processing, 52-53, pp. 115-132. (doi: 10.1016/j.ymssp.2014.06.005)

Zhou, X.-Y., Gosling, P.D., Pearce, C.J., Ullah, Z., Kaczmarczyk, L. (2015) Perturbation-based stochastic multi-scale computational homogenization method for woven textile composites. International Journal of Solids and Structures, 80, pp. 368-380. (doi: 10.1016/j.ijsolstr.2015.09.008)

Ghavanloo, E., Fazelzadeh, S. A., Murmu, T., Adhikari, S. (2015) Radial breathing-mode frequency of elastically confined spherical nanoparticles subjected to circumferential magnetic field. Physica E: Low-Dimensional Systems and Nanostructures, 66, pp. 228-233. (doi: 10.1016/j.physe.2014.10.003)

Bonet, J., Gil, A. J., Lee, C. H., Aguirre, M., Ortigosa, R. (2015) A first order hyperbolic framework for large strain computational solid dynamics. Part I: total Lagrangian isothermal elasticity. Computer Methods in Applied Mechanics and Engineering, 283, pp. 689-732. (doi: 10.1016/j.cma.2014.09.024)

Grassl, P., Fahy, C., Gallipoli, D., Wheeler, S.J. (2015) On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture. Journal of the Mechanics and Physics of Solids, 93, pp. 64-73. (doi: 10.1016/j.jmps.2014.11.011)

McGinty, S., McKee, S. (2015) Blade shape of a Troposkein type of vertical axis wind turbine. Mathematical Spectrum, 47, pp. 51-60.

Kundu, A., Adhikari, S. (2015) Dynamic analysis of stochastic structural systems using frequency adaptive spectral functions. Probabilistic Engineering Mechanics, 39, pp. 23-38. (doi: 10.1016/j.probengmech.2014.11.003)

Dey, S., Mukhopadhyay, T., Adhikari, S. (2015) Free Vibration Analysis of Angle-ply Composite Plates with Uncertain Properties. (doi: 10.2514/6.2015-1146)

Dey, S., Adhikari, S., Karmakar, A. (2015) Impact response of functionally graded conical shells. Latin American Journal of Solids and Structures, 12, pp. 133-152. (doi: 10.1590/1679-78251382)

Karličić, D., Cajić, M., Murmu, T., Adhikari, S. (2015) Non local longitudinal vibration of viscoelastic coupled double-nanorod systems. European Journal of Mechanics - A/Solids, 49, pp. 183-196. (doi: 10.1016/j.euromechsol.2014.07.005)

Grassl, P., Athanasiadis, I. (2015) 3D Modelling of the Influence of Microcracking on Mass Transport in Concrete. (doi: 10.1061/9780784479346.044)

McGinty, S., Pontrelli, G. (2015) A 1D Mechanistic Model Can Predict Duration of In-Vivo Drug Release from Drug-Eluting Stents.

Aggarwal, A., Sacks, M. S. (2015) A framework for determination of heart valves’ mechanical properties using inverse-modeling approach. Springer

Hossain, M., Chatzigeorgiou, G., Meraghni, F., Steinmann, P. (2015) A multi-scale approach to model the curing process in magneto-sensitive polymeric materials. International Journal of Solids and Structures, 69-70, pp. 34-44. (doi: 10.1016/j.ijsolstr.2015.06.011)

Landkammer, P., Steinmann, P. (2015) Application of a non-invasive form finding algorithm to the ring compression test with varying friction coefficients. Key Engineering Materials, 651-3, pp. 1381-1386. (doi: 10.4028/www.scientific.net/KEM.651-653.1381)

Dreiden, G.V., Samsonov, A.M., Semenova, I.V., Shvartz, A.G. (2015) Bulk Strain Solitons in a Cylindrical Shell. (doi: 10.1109/DD.2014.7036426)

McGinty, S., Wheel, M., McKee, S., McCormick, C., McKittrick, C., Kennedy, S., Oldroyd, K. (2015) Can Anisotropy Enhance the Spatial Uniformity of Drug Distribution in Biological Tissue?

Hossain, M., Steinmann, P. (2015) Continuum physics of materials with time-dependent properties: Reviewing the case of polymer curing. Elsevier

Wilhelm, P., Rudolph, J., Steinmann, P. (2015) Effects of pressurized water reactor medium on the fatigue life of austenitic stainless steels. Journal of Pressure Vessel Technology, 137, (doi: 10.1115/1.4029832)

Lee, C.-H., Amini, R., Sakamoto, Y., Carruthers, C. A., Aggarwal, A., Gorman, R. C., Gorman, J. H., Sacks, M. S. (2015) Mitral valves: a computational framework. Springer

Al-Budairi, H., Kaczmarczyk, L., Pearce, C. J. (2015) Modelling of Dynamic Crack Propagation in 3D Elastic Continuum Using Configurational Mechanics.

Athanasiadis, I., Wheeler, S., Grassl, P. (2015) Modelling the Time Dependence of Transport Properties of Porous Materials. (doi: 10.1061/9780784479346.043)

Shvartz, A.G., Samsonov, A.M., Semenova, I.V., Dreiden, G.V. (2015) Numerical Simulation of Bulk Solitons in Elongated Shells. (doi: 10.1109/DD.2015.7354881)

Barbera, D., Chen, H., Liu, Y. (2015) On the Creep Fatigue Behaviour of Metal Matrix Composites. (doi: 10.1016/j.proeng.2015.12.277)

Schrade, D., Müller, R., Gross, D., Steinmann, P. (2015) Phase field simulations of the poling behavior of BaTiO3 nano-scale thin films with SrRuO3 and Au electrodes. European Journal of Mechanics - A/Solids, 49, pp. 455-466. (doi: 10.1016/j.euromechsol.2014.08.007)

McKee, S., Mcginty, S. (2015) Stents, blood flow and pregnancy: mathematical modelling in the raw. John Wiley & Sons Ltd.

Dey, S., Mukhopadhyay, T., Khodaparast, H.H., Adhikari, S. (2015) Uncertainty Quantification of Dynamic Characteristics of Composites - a Fuzzy Approach. (doi: 10.7712/120215.4293.651)

Grieshaber, B.J., McBride, A.T., Reddy, B.D. (2015) Uniformly convergent interior penalty methods using multilinear approximations for problems in elasticity. SIAM: Journal on Numerical Analysis, 53, pp. 2255-2278. (doi: 10.1137/140966253)