Dr Andrea Montecucco

  • Research Associate (Electronic and Nanoscale Engineering)

telephone: +44/01413302768
email: Andrea.Montecucco@glasgow.ac.uk

Publications

List by: Type | Date

Jump to: 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011
Number of items: 33.

2018

Selvaraj, P. et al. (2018) Enhancing the efficiency of transparent dye-sensitized solar cells using concentrated light. Solar Energy Materials and Solar Cells, 175, pp. 29-34. (doi:10.1016/j.solmat.2017.10.006)

2017

Li, W. et al. (2017) A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems. Renewable Energy, 112, pp. 166-186. (doi:10.1016/j.renene.2017.05.012)

Baig, H. et al. (2017) Outdoor performance of a reflective type 3D LCPV system under different climatic conditions. AIP Conference Proceedings, 1881(1), 020004. (doi:10.1063/1.5001403)

Li, W. et al. (2017) Multiphysics simulations of thermoelectric generator modules with cold and hot blocks and effects of some factors. Case Studies in Thermal Engineering, 10, pp. 63-72. (doi:10.1016/j.csite.2017.03.005)

Han, G. et al. (2017) Chlorine-enabled electron doping in solution-synthesised SnSe thermoelectric nanomaterials. Advanced Energy Materials, 7(13), 1602328. (doi:10.1002/aenm.201602328)

Li, W. et al. (2017) A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells. Applied Energy, 202, pp. 755-771. (doi:10.1016/j.apenergy.2017.05.182)

Montecucco, A., Siviter, J. and Knox, A.R. (2017) Combined heat and power system for stoves with thermoelectric generators. Applied Energy, 185(Part 2), pp. 1336-1342. (doi:10.1016/j.apenergy.2015.10.132)

2016

Baig, H. et al. (2016) Indoor characterization of a reflective type 3D LCPV system. AIP Conference Proceedings, 1766, 020002. (doi:10.1063/1.4962070)

Li, W. et al. (2016) Thermal performance of two heat exchangers for thermoelectric generators. Case Studies in Thermal Engineering, 8, pp. 164-175. (doi:10.1016/j.csite.2016.06.008)

Han, G. et al. (2016) Facile surfactant-free synthesis of p-type SnSe nanoplates with exceptional thermoelectric power factors. Angewandte Chemie (International Edition), 55(22), pp. 6433-6437. (doi:10.1002/anie.201601420) (PMID:27094703)

Meng, X.-l. et al. (2016) A novel absorptive/reflective solar concentrator for heat and electricity generation: an optical and thermal analysis. Energy Conversion and Management, 114, pp. 142-153. (doi:10.1016/j.enconman.2016.02.011)

Azough, F. et al. (2016) Ba6−3x Nd8+2x Ti18O54 tungsten bronze: a new high-temperature n-type oxide thermoelectric. Journal of Electronic Materials, 45(3), pp. 1894-1899. (doi:10.1007/s11664-015-4275-6)

Sweet, T. K.N. et al. (2016) Scalable Solar Thermoelectrics and Photovoltaics (SUNTRAP). AIP Conference Proceedings, 1766, 080007.

2015

Li, W. et al. (2015) Multiphysics simulations of a thermoelectric generator. Energy Procedia, 75, pp. 633-638. (doi:10.1016/j.egypro.2015.07.473)

Li, W. et al. (2015) Coupled simulation of performance of a crossed compound parabolic concentrator with solar cell. Energy Procedia, 75, pp. 325-330. (doi:10.1016/j.egypro.2015.07.371)

Siviter, J., Montecucco, A. and Knox, A. (2015) Experimental application of thermoelectric devices to the Rankine cycle. Energy Procedia, 75, pp. 627-632. (doi:10.1016/j.egypro.2015.07.472)

Montecucco, A., Siviter, J. and Knox, A. R. (2015) Constant heat characterisation and geometrical optimisation of thermoelectric generators. Applied Energy, 149, pp. 248-258. (doi:10.1016/j.apenergy.2015.03.120)

Siviter, J., Montecucco, A. and Knox, A.R. (2015) Rankine Cycle efficiency gain using thermoelectric heat pumps. Applied Energy, 140, pp. 161-170. (doi:10.1016/j.apenergy.2014.11.075)

Montecucco, A. and Knox, A. (2015) Maximum power point tracking converter based on the open-circuit voltage method for thermoelectric generators. IEEE Transactions on Power Electronics, 30(2), pp. 828-839. (doi:10.1109/TPEL.2014.2313294)

Li, W., Paul, M. C. , Siviter, J., Montecucco, A. and Knox, A. (2015) Identifying Thermal Performance of Two Heat Exchangers for Thermoelectric Generators with CFD. In: UK Heat Transfer Conference 2015, Edinburgh, UK, 7-8 Sept 2015, (Unpublished)

Montecucco, A., Siviter, J. and Knox, A. R. (2015) A combined heat and power system for solid-fuel stoves using thermoelectric generators. Energy Procedia, 75, pp. 597-602. (doi:10.1016/j.egypro.2015.07.462)

Mullen, P., Siviter, J., Montecucco, A. and Knox, A.R. (2015) Thermoelectric energy harvester with a cold start of 0.6 °C. Materials Today: Proceedings, 2(2), pp. 823-832. (doi:10.1016/j.matpr.2015.05.106)

2014

Montecucco, A., Siviter, J. and Knox, A. (2014) The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel. Applied Energy, 123, pp. 47-54. (doi:10.1016/j.apenergy.2014.02.030)

Maganga, O., Phillip, N., Burnham, K. J., Montecucco, A., Siviter, J., Knox, A. and Simpson, K. (2014) Hardware implementation of maximum power point tracking for thermoelectric generators. Journal of Electronic Materials, 43(6), pp. 2293-2300. (doi:10.1007/s11664-014-3046-0)

Montecucco, A. and Knox, A. R. (2014) Accurate simulation of thermoelectric power generating systems. Applied Energy, 118, 166 - 172. (doi:10.1016/j.apenergy.2013.12.028)

2013

Buckle, J.R., Knox, A., Siviter, J. and Montecucco, A. (2013) Autonomous underwater vehicle thermoelectric power generation. Journal of Electronic Materials, 42(7), pp. 2214-2220. (doi:10.1007/s11664-013-2584-1)

Knox, A. R., Buckle, J., Siviter, J., Montecucco, A. and McCulloch, E. (2013) Megawatt-scale application of thermoelectric devices in thermal power plants. Journal of Electronic Materials, 42(7), pp. 1807-1813. (doi:10.1007/s11664-012-2434-6)

Montecucco, A., Buckle, J., Siviter, J. and Knox, A. R. (2013) A new test rig for accurate nonparametric measurement and characterization of thermoelectric generators. Journal of Electronic Materials, 42(7), pp. 1966-1973. (doi:10.1007/s11664-013-2484-4)

2012

Chiwanga, S., Simpson, K., Gilchrist, R. and Montecucco, A. (2012) Characterisation of commercial thermoelectric module using experimental and numerical Techniques to compile performance data. In: 3rd Conference on Thermoelectrics, Berlin, Germany, 21-23 Nov 2012,

Siviter, J., Knox, A., Buckle, J., Montecucco, A. and McCulloch, E. (2012) Megawatt scale energy recovery in the Rankine cycle. In: 2012 IEEE Energy Conversion Congress and Exposition (ECCE), Raleigh, NC, USA, 15-20 Sept 2012, pp. 1374-1379. (doi:10.1109/ECCE.2012.6342655)

Montecucco, A., Siviter, J. and Knox, A.R. (2012) Simple, fast and accurate maximum power point tracking converter for thermoelectric generators. In: Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, Raleigh, NC, USA, 15-20 Sep 2012, pp. 2777-2783. (doi:10.1109/ECCE.2012.6342530)

Montecucco, A., Buckle, J.R. and Knox, A.R. (2012) Solution to the 1-D unsteady heat conduction equation with internal Joule heat generation for thermoelectric devices. Applied Thermal Engineering, 35, pp. 177-184. (doi:10.1016/j.applthermaleng.2011.10.026)

2011

Minisci, E., Campobasso, M., Dell'Antonio, M., Montecucco, A. and Vasile, M. (2011) Multi-disciplinary robus design of variable-speed wind turbines. In: International Conference on Evolutionary and Deterministic Methods for Design, Capua, Italy, 14-18 Sep 2011,

This list was generated on Wed Nov 22 13:51:29 2017 GMT.
Number of items: 33.

Articles

Selvaraj, P. et al. (2018) Enhancing the efficiency of transparent dye-sensitized solar cells using concentrated light. Solar Energy Materials and Solar Cells, 175, pp. 29-34. (doi:10.1016/j.solmat.2017.10.006)

Li, W. et al. (2017) A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems. Renewable Energy, 112, pp. 166-186. (doi:10.1016/j.renene.2017.05.012)

Baig, H. et al. (2017) Outdoor performance of a reflective type 3D LCPV system under different climatic conditions. AIP Conference Proceedings, 1881(1), 020004. (doi:10.1063/1.5001403)

Li, W. et al. (2017) Multiphysics simulations of thermoelectric generator modules with cold and hot blocks and effects of some factors. Case Studies in Thermal Engineering, 10, pp. 63-72. (doi:10.1016/j.csite.2017.03.005)

Han, G. et al. (2017) Chlorine-enabled electron doping in solution-synthesised SnSe thermoelectric nanomaterials. Advanced Energy Materials, 7(13), 1602328. (doi:10.1002/aenm.201602328)

Li, W. et al. (2017) A scaling law for monocrystalline PV/T modules with CCPC and comparison with triple junction PV cells. Applied Energy, 202, pp. 755-771. (doi:10.1016/j.apenergy.2017.05.182)

Montecucco, A., Siviter, J. and Knox, A.R. (2017) Combined heat and power system for stoves with thermoelectric generators. Applied Energy, 185(Part 2), pp. 1336-1342. (doi:10.1016/j.apenergy.2015.10.132)

Baig, H. et al. (2016) Indoor characterization of a reflective type 3D LCPV system. AIP Conference Proceedings, 1766, 020002. (doi:10.1063/1.4962070)

Li, W. et al. (2016) Thermal performance of two heat exchangers for thermoelectric generators. Case Studies in Thermal Engineering, 8, pp. 164-175. (doi:10.1016/j.csite.2016.06.008)

Han, G. et al. (2016) Facile surfactant-free synthesis of p-type SnSe nanoplates with exceptional thermoelectric power factors. Angewandte Chemie (International Edition), 55(22), pp. 6433-6437. (doi:10.1002/anie.201601420) (PMID:27094703)

Meng, X.-l. et al. (2016) A novel absorptive/reflective solar concentrator for heat and electricity generation: an optical and thermal analysis. Energy Conversion and Management, 114, pp. 142-153. (doi:10.1016/j.enconman.2016.02.011)

Azough, F. et al. (2016) Ba6−3x Nd8+2x Ti18O54 tungsten bronze: a new high-temperature n-type oxide thermoelectric. Journal of Electronic Materials, 45(3), pp. 1894-1899. (doi:10.1007/s11664-015-4275-6)

Sweet, T. K.N. et al. (2016) Scalable Solar Thermoelectrics and Photovoltaics (SUNTRAP). AIP Conference Proceedings, 1766, 080007.

Li, W. et al. (2015) Multiphysics simulations of a thermoelectric generator. Energy Procedia, 75, pp. 633-638. (doi:10.1016/j.egypro.2015.07.473)

Li, W. et al. (2015) Coupled simulation of performance of a crossed compound parabolic concentrator with solar cell. Energy Procedia, 75, pp. 325-330. (doi:10.1016/j.egypro.2015.07.371)

Siviter, J., Montecucco, A. and Knox, A. (2015) Experimental application of thermoelectric devices to the Rankine cycle. Energy Procedia, 75, pp. 627-632. (doi:10.1016/j.egypro.2015.07.472)

Montecucco, A., Siviter, J. and Knox, A. R. (2015) Constant heat characterisation and geometrical optimisation of thermoelectric generators. Applied Energy, 149, pp. 248-258. (doi:10.1016/j.apenergy.2015.03.120)

Siviter, J., Montecucco, A. and Knox, A.R. (2015) Rankine Cycle efficiency gain using thermoelectric heat pumps. Applied Energy, 140, pp. 161-170. (doi:10.1016/j.apenergy.2014.11.075)

Montecucco, A. and Knox, A. (2015) Maximum power point tracking converter based on the open-circuit voltage method for thermoelectric generators. IEEE Transactions on Power Electronics, 30(2), pp. 828-839. (doi:10.1109/TPEL.2014.2313294)

Montecucco, A., Siviter, J. and Knox, A. R. (2015) A combined heat and power system for solid-fuel stoves using thermoelectric generators. Energy Procedia, 75, pp. 597-602. (doi:10.1016/j.egypro.2015.07.462)

Mullen, P., Siviter, J., Montecucco, A. and Knox, A.R. (2015) Thermoelectric energy harvester with a cold start of 0.6 °C. Materials Today: Proceedings, 2(2), pp. 823-832. (doi:10.1016/j.matpr.2015.05.106)

Montecucco, A., Siviter, J. and Knox, A. (2014) The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel. Applied Energy, 123, pp. 47-54. (doi:10.1016/j.apenergy.2014.02.030)

Maganga, O., Phillip, N., Burnham, K. J., Montecucco, A., Siviter, J., Knox, A. and Simpson, K. (2014) Hardware implementation of maximum power point tracking for thermoelectric generators. Journal of Electronic Materials, 43(6), pp. 2293-2300. (doi:10.1007/s11664-014-3046-0)

Montecucco, A. and Knox, A. R. (2014) Accurate simulation of thermoelectric power generating systems. Applied Energy, 118, 166 - 172. (doi:10.1016/j.apenergy.2013.12.028)

Buckle, J.R., Knox, A., Siviter, J. and Montecucco, A. (2013) Autonomous underwater vehicle thermoelectric power generation. Journal of Electronic Materials, 42(7), pp. 2214-2220. (doi:10.1007/s11664-013-2584-1)

Knox, A. R., Buckle, J., Siviter, J., Montecucco, A. and McCulloch, E. (2013) Megawatt-scale application of thermoelectric devices in thermal power plants. Journal of Electronic Materials, 42(7), pp. 1807-1813. (doi:10.1007/s11664-012-2434-6)

Montecucco, A., Buckle, J., Siviter, J. and Knox, A. R. (2013) A new test rig for accurate nonparametric measurement and characterization of thermoelectric generators. Journal of Electronic Materials, 42(7), pp. 1966-1973. (doi:10.1007/s11664-013-2484-4)

Montecucco, A., Buckle, J.R. and Knox, A.R. (2012) Solution to the 1-D unsteady heat conduction equation with internal Joule heat generation for thermoelectric devices. Applied Thermal Engineering, 35, pp. 177-184. (doi:10.1016/j.applthermaleng.2011.10.026)

Conference Proceedings

Li, W., Paul, M. C. , Siviter, J., Montecucco, A. and Knox, A. (2015) Identifying Thermal Performance of Two Heat Exchangers for Thermoelectric Generators with CFD. In: UK Heat Transfer Conference 2015, Edinburgh, UK, 7-8 Sept 2015, (Unpublished)

Chiwanga, S., Simpson, K., Gilchrist, R. and Montecucco, A. (2012) Characterisation of commercial thermoelectric module using experimental and numerical Techniques to compile performance data. In: 3rd Conference on Thermoelectrics, Berlin, Germany, 21-23 Nov 2012,

Siviter, J., Knox, A., Buckle, J., Montecucco, A. and McCulloch, E. (2012) Megawatt scale energy recovery in the Rankine cycle. In: 2012 IEEE Energy Conversion Congress and Exposition (ECCE), Raleigh, NC, USA, 15-20 Sept 2012, pp. 1374-1379. (doi:10.1109/ECCE.2012.6342655)

Montecucco, A., Siviter, J. and Knox, A.R. (2012) Simple, fast and accurate maximum power point tracking converter for thermoelectric generators. In: Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, Raleigh, NC, USA, 15-20 Sep 2012, pp. 2777-2783. (doi:10.1109/ECCE.2012.6342530)

Minisci, E., Campobasso, M., Dell'Antonio, M., Montecucco, A. and Vasile, M. (2011) Multi-disciplinary robus design of variable-speed wind turbines. In: International Conference on Evolutionary and Deterministic Methods for Design, Capua, Italy, 14-18 Sep 2011,

This list was generated on Wed Nov 22 13:51:29 2017 GMT.